Antec Torque Assembly

Part of my Project Eligius II build which is now complete
This is the final assembly of Eligius II. Covering the Antec Torque ATX Chassis, GPU, Motherboard & first boot. Do note, some parts arrived later on and so were fitted later on without filming them. In actual sense, this edit sequence was complied and edited on Eliguis II pc whilst the first 2 upload were on the old Ryzen 5 1600 build.
Here's an updated full list of all the parts & components for the assembled build above - au.pcpartpicker.com/b/ByJbt6
Film equipment
1x Canon EOS C200 Cinema Camera
1x Canon EF 24-70mm f/2.8L II USM Lens
1x CF Twin leg with ground spreader video tripod 100/75mm bowl
2x Elinchrom ELC Pro 500 Single Flash Head
Old PC specs (I will soon update this to Eligius II PC specs):
CPU = AMD Ryzen 5 1600, 6c 12t @3.6Ghz (Currently oc to 4.075 - "stable" with stress tested for approx. 3hrs) ***This overclock demanded way too high voltage to be stable (1.475v) Water cooling seriously helped to achieve this high clock at extended longer sessions.
CPU Water Cooler = Gigabyte Aorus Waterforce X 360 CPU AIO Water Cooler
GPU = 1x Gigabyte GeForce RTX 2060 6G D6 Graphics Card - Rev 2.0 @1680 MHz
Ram = CORSAIR VENGEANCE LPX CMK8GX4M1A2666C16 32GB (4X8GB) 2666MHZ DDR4 @2666Mhz (XMP Profile 1)
Storage Drives x2:
(win10 OS Drive) = 1x Crucial P2 1TB 3D NAND PCIe NVMe M.2 SSD
(Data & Media Drive) = 1x Seagate Barracuda 2TB 3.5in SATA3 256MB Cache Hard Drive (Model code = ST2000DM008)
Motherboard = Gigabyte GA-AB350-Gaming 3 (rev.1)
***Wi-Fi Add in Card = 1x TP-Link AC1200 Wi-Fi Bluetooth 4.2 PCIe Adaptor (because the above motherboard doe not come with built in Wi-Fi)
PSU = Generic Power Supply 650W (ATX)
Pc Case = Thermaltake Core P3 Open Frame Mid Tower Case - White (Snow Edition)
Monitor = Lenovo L27i-28 Monitor 75Hz @1920 x 1080

[@mdshobuj3170]

Very good ☺️☺️☺️☺️ video

[@JasonXBeats]

you still using this case?

[@tafengafaasisila1207]

😂