First time set up of a modded Switch
Vložit
- čas přidán 1. 06. 2024
- Quick guide on what to do when setting up a modded Switch for the first time.
Sthetix: www.sthetix.info/
Hats pack (need telegram): www.sthetix.info/the-hats-pack/
fat32 formatter: download.cnet.com/miniaide-fa...
Thanks a bunch for the help, started working aprenticeship at a soldering store here, customer wanted me to not only solder but to do the setup as well
Glad it helped!
amazing video!! showed me exactly what i needed!
im using oled hardmod chip,to anyone see this, you can set the sd partition 10GB cause the 'system' only take 4GB at least.. dont waste storage😅 and much faster just taken 1 minute something to do this..👍👍
Amazing video. Should be on top, clearly!!! Public service!
Thanks mate
Very good video 🔥, can you do a tinfoil video setting up and protecting from servers?
I tried with 2 sd cards and both failed, they are now corrupted without solution
Does anyone know if there’s a max limit on sd cards for switch homebrew I did a 3ds recently and it was recommended not going over 128 cause there was image issues with custom themes and such ik 128 it’s recommended minimum for switch but I’m just wondering if there’s a point that’s deemed ‘too much’ for the switch
Again, you the man, or lady if so. Thanks' again
Thanks, the man will do :)
Thank you so much for this. What do i do when upgrading sd size (chip)? do I just have to run the whole process again or no?
There are ways to clone sd cards with partitions, but I always find it better to start fresh, just make sure saves are backed up etc then can also get rid of the bits that no longer use.
So does the software automatically protect you from connecting to Nintendo servers or you have to make sure you manually disconnect from wifi . I haven’t seen anything to clear on that not quite sure i understand yet … someone told me you can still connect to wifi but that Nintendo servers are blocked by some setting .
There are other ways but i never connect to wifi when on custom, only when using official.
Pls do tutorial how install games that is last step
Done
On telegram there is 2 download. The one you showed and the customer firmware that is larger. What to do with that one? Thank you
Yes one is fw for if you need to update offline, if not dont need to download it.
Is using telegram safe?, not sure about those apps as they always pop up on website?
Yer I have used it for years now
Should the SD Card be from san disk company or it doesn’t matter it’s work from any cd card??
As long as it is a notable SD card company
What is the Button called "Normal" under thereboot options. And why is it not good to be connected to the Internet on the Otherside?
I have not pressed normal so not sure!
You Never want to be connected to the internet when using custom firmware as the big N can detect it and will ban your console.
@@FixModBuildExtra your whole console or just the online services?
@@leonxndr7576 Online, and updates
My Switch doesnt show any battery percentage, voltage and current stats. Neither at the charger or in battery mode. And it was fully charged when i modded it. Do you know something about my issue?
No sorry, not seen anything like that before?
1:55 you didn't show what to do if its not hard modded, or even what that means, what do i do with my rcm jig?
What does an rcm jig do? Isn't it usually you install chip then you set up it with sd card?
if its not hard modded you will need to put clip down right joycon rail, insert injector and hold volume up and power button to boot.
is this tutorial for v1 or v2
Works on both, just the orientation of the chips you solder slightly differ.
@@FixModBuildExtra did rp2040 modchip still works and what chip you use give me your chip full name
I buy 5 games did you recommend me to mod the switch
If you can yes of course if you mod your not gonna pay for games any more
how do u turn it back on when it fully dies?
Plug it in and it will get a battery meter in the corner, hold the power button down for about 20secs, the Nintendo logo will come on then off, if you have done it right nothing will be on the screen.
what the name of the modchip you use
rp2040, typr that in aliexpress and will come up with a few options depending on your switch version
Post process to install games too
I will look at doing a video soon
can you use exfat format?
Yes and its easier for installing files over 4gb BUT it is known to corrupt and crash your system so you run a bigger risk of losing everything and having to start again.
How install games
i will look at doing a video soon
what the name of the modchip you use and did you buy it from aliexpress ? + thanks for easy tutorial give me your chip full name
How to do on windows 11
sorry dont have windows 11, I would assume it would be the same?
I’ll try to follow to steps
Can you connect shortly to internet and disconnect quickly to be able to find it in the router and block it?
I wouldnt connect at all but you might be ok, so up to you
@@FixModBuildExtrathank you!