Tekno EB410.2 - Running Video - OCRC - Watch Till the End 😉
Vložit
- čas přidán 7. 09. 2024
- Here's my running video of my Tekno EB410.2 1/10th scale 4wd electric Buggy at OCRC. Please stay tuned at the end for some fun bloopers - because RC is supposed to be fun!
Check out Tyler's Running Video: • Tekno EB410.2 Build Fi...
Here's items mentioned in this video:
EB410.2 Chassis kit: bit.ly/2TrTFQO
Pactra Metallic Blue: bit.ly/2Vc8qst
Pactra Outlaw Black: bit.ly/2w3u1Zl
Pactra Sprint White: bit.ly/32shLxW
JConcepts Ellipse Rear Tire: bit.ly/2JpDeyD
JConcepts Ellipse Front Tire: Not Available Yet
JConcepts MONO Rear Wheel: bit.ly/3dDUcat
JConcepts MONO Front Wheel: bit.ly/2xA4uIh
Protek RC 160TBL Servo: bit.ly/2TIF2sE
Protek RC Shorty Lipo: bit.ly/2TLdy5O
Hobbywing V10 G3 5.5t Motor: bit.ly/2Ut0oud
Hobbywing XR10 Pro ESC: bit.ly/3bzMkF6
Avid Wing Buttons: amzn.to/2XQAVei
Avid Chassis Skin: bit.ly/AvidChas...
Avid 19t Pinion Gear: bit.ly/Avid19tP...
Avid Wire Separator: bit.ly/Avid3Wire
Avid 5mm Bullets: bit.ly/Avid5mmB...
✦Connect with The RCNetwork✦
Don't miss out on more RC blogs, pics, and newsletter from
TheRCNetwork.com. Get the stuff that's not on CZcams!
Subscribe today: www.thercnetwor...
Instagram: / the_rcnetwork
Facebook: / theofficialrcnetwork
✦Get The RCNetwork Decals and Hats✦
Click to Shop: www.thercnetwor...
✦Get RC Product Recommendations✦
Visit The RCNetwork's Amazon Page:
www.amazon.com...
✦My Video Gear✦
Studio Camera: amzn.to/2a0que9
Studio Tripod: amzn.to/29VIZ89
Studio Lights: amzn.to/2a4Ecmb
SD Cards for Studio Cam: amzn.to/2acPqSS
Lavalier Mic: amzn.to/2acOjCO
Action Camera: amzn.to/2a94Sfv
Action Mic: amzn.to/2aoZOpF
SD Cards for Action Cam: amzn.to/2a946PB
#thercnetwork #teknorc #eb410point2 #eb410 #tekno #chassiskit #rc #radiocontrol #rccar #rccars #remotecontrol #hobby #rchobby #rcracing #rctrucks #rcnews
“TheRCNetwork.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.”
Nice hot laps 👍 The bloopers looks like my driving lol
Thanks SRC! Always cool to see you in the comments! Yeah, when I was editing, I try and make myself lok as good as possible...but the follies were too good to not include
7:34 I seen that plenty of times! Awesome vid, great driving too
Yep, I think I did it at least twice that day! Thanks for stopping by!
Awesome! Loved the bloopers at the end 👌 That's about how I look when I go to the track 😂 Sending it off the track is the most embarrassing 😉
Thanks Great Lakes! yeah, I was going through the footage at the end and kept finding these follies and had to include them. I hadn't been to a track in a few months, so I was rusty
The last part looks like my driving. 👍🏽🐒🇺🇸
That’s me at the beginning of a main cause everyone scrambles around to go fast
Very cool video.!! Next best thing to driving my own.!!
That car is set up very well , it looks quite majestic in the air , and handles the bumps just beautiful. And it’s geared just right the straight , there’s no shortage of power either .
For an amateur that car gave you pro like ability’s 👍
That was awesome.. I love the way it looks and you hit that triple pretty smooth.
Yeah, when I actually hit the landing. The car is amazing though
Got to get one of those looks like a lot of fun to drive
It's a very top notch RC with some great durability, as you could see at the end
I got one on the way. It is supposed be delivered by the mail man today. Can't wait!
Nice! It's a great build and drives beautifully
That car looks great on the track. Respect to the driver and the car set-up. But that body
Yeah, I have a Pug for a dog, so I appreciate ugly things 😉 - Thanks for the comments on the driver!
Nice video, your driving has improved a lot from earlier videos! 😎👍
Thanks buddy! I try 😉 - But only get to the track 5-6 times a year - it's about 45 minutes away and all that work stuff gets in the way!
Love this buggy, got one coming
My way!
Nice! It's a great build and drive!
Wow! That Tekno handles really well. It certainly moves with that 5.5 turn motor. Great content Rich 👍👊😎
Thanks buddy! Yeah, and this was all stock. I'll start messing with it here soon
Nice driving Rich!
More bloopers please, lol!
You call them bloopers, that's my racing style yooo
Cool video btw
Same 😂😂
It looks so good out there on the track!
Thanks StevO!
Cool, she jumps nice!
Yes, jumps and lands better than the EB410
410.2 looks good the landings look solid
So sick brother, I feel like a lame. I’ve never been on a track like that before. That would be so cool. I’m sure I’d do crappie but would be a blast doing ao
Thanks for watching! running on a track this large is intimidating, I was when I first came here. But once you run on one, it's hard to goto a smaller track!
7:27 I’ve never seen a car with so much brakes and grip that it pulls a stoppie, that’s how you know when you got good tires
Gotta love it!
like a dream
Agreed....too bad OCRC closed for good last week ☹️
that looks great on the track, wish we had something ike this in Toronto
Thanks - it's a great buggy and track....I'm just not the best driver 😉
Loved the blooper reel
He inspired me to start my CZcams channel
Thanks for watching! Glad to help inspire!
@@TheRCNetwork thx
Awesome looking EB. It looks like it handles very well.
Great to see your back to having fun :)
By the way I built the Kyosho Javilin still need to do some paint work and I installed the chain drive.
Thanks David! It's cool to just have fun in RC. I missed that. Good deal on the Javelin...Still Orange?
I'm gonna go with the belt for starters.....on my nib turbo optima......
That was hot when he jumped out of the track! Still was bad, but excellent blooper in my opinion.
Thanks...I think I did that three times that day.....it's hard to judge that jump for the driverstand
Nice vid sir. Just waiting on my body to get back from painting - can't wait to drive the .2. I'm sure I'm going to have a long blooper reel as well :)
Thanks Tony! I'll paint your bodies for you....but I am color blind....so Red, Silver and White, right??
I just want to congratulate you for putting in a real power plant. No one these days wants to run mod and learn throttle control. Everyone wants to run 13.5, with lightened everything, counting grams of weight. All the while spending tons more money to go as fast as possible with slower equipment lol. Just run mod, it's cheaper.
Awesome video! Can't wait to get mine!
thanks - should be lots of interest on this as im deciding whether its worth the upgrade
I think it is...plus you get a fresh kit! Compared to my stock set up EB410, the EB410.2 seemed to jump and land better (when I hit the landings), seemed to have more steering and overall more stable
Awesome driving 👍
Thanks buddy!
lol those bloopers were rad....
Not bad, huh? I think you were at least a couple!
Beautiful machine my friend
Thanks buddy!
Lol , love the bloopers at the end!
It's always fun to see how crappy I drive!
@@TheRCNetwork I'll be doing my first racing here soon, getting the Tekno. Very excited to give it a try. Lol, I'm sure my whole race will look like your bloopers!
Great video, and the bloopers definitely were worth it :)
Thanks Okke!
nice, bloopers were great!
Thanks buddy! It's always cool to see how stupid it looks when I'm editing
Looking forward to your thoughts/review.
Thanks CL. I'll have one out here soon!
Great videos. Very thorough. Thank you. BTW, is OC Raceway closed for good now?
Thanks buddy. Yes, unfortunately, OCRC closed up at the end of Dec 2021. The story goes that the church next door and across the alley, went behind OCRC's backs to the new landlord and basically said "Don't rent to them anymore and rent it to us". Very christian like. OCRC's owners did attempt to move, but the added cost of not only a new building's rent (they had a decent deal) and literally moving tons of clay - it just wasn't in the works for OCRC. It's honestly sad. They were the epitome of what a track should be and a cultish church took them down
looks like it turns better than the .1
I hope that dude is better at turn marshaling during a race. Between being on his phone, having his hands in his hoodie pocket, and walking casually to flip the truck over I don’t think I could refrain from giving this dude some guff.
He was a dad of a kid on the track. OCRC usually doesn't have marshalls during the weekdays. But yes, he was very "casual"
Impressive!
Thanks for stopping by!
Yes!!!!! Great vid rich! 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺
Penalty for violating track limits. 🤪😁
I know, huh?
Triples all day
@The RCNETWORK, Rich when you paint your 1/10 bodies do you wait until the primary color or colors are dry before spraying the outlaw black? Or Do you spray the outlaw black while the other colors are still wet? Aaron
Yes, I wait till each layer is dry...I usually lay it in the sun to help
How many coats of primary color and how many coats of outlaw black to back the primary color?
Great upload! Loved the bloopers, had a good chuckle 🤣🤣🤣
It’s obviously durable. What did you think about your motor selection? It “seemed” to only really have the chance to shine on the long stretch, where it looked like it still had more to give!
I’m a basher as you know. Would a motor with more turns get you through those corners and jumps quicker. Or do I have it back to front. Lower turns more top end, higher turns more low down torque?
It would be interesting to see the difference, lap time comparison.
Also is it worth racers updating to the .2?
Cheers Rich.
Thanks PG! Yes, the blooper section was funny. My camera guy and I had a good laugh on a few of those. The motor is probably too much for it...my 6.5t in my eb410 seemed faster with a bit more grunt. typically a 5.5t will have the top end speed, but less torque. a slower turned motor would be better for the turns and jumps....but then again, I haven't messed with any tuning on the ESC yet either. Point2 worth it? I'd say yes, especially if your Eb410 is older - and in need of a rebuild. If you have a less than year old EB410...maybe just adding some of the updates would suffice and give you similar results. But the total package that Tekno has in the Point2 is a lot of value
The RCNetwork Thanks Rich. A pleasure to watch!
Durability test !
HI Rich, I have a backyard track, pretty good but rougher than a club track. My DB48 runs great on my track, love that build, but I was looking for something in the 1/10 scale buggy for my track and was wondering if the EB410.2 is a good durable buggy for a homemade track? Thank you, and I really enjoy your thorough builds and reviews!
It's the toughest 1/10th scale 4wd on the market. It should do fine on your track - the .2 is even more durable now with 3.5mm pins for the arms now
Hey man love your videos, because of you I've bought myself an eb48 2.0 and followed your built
It's so good. Just got myself the new et410 2.0, which motor/esc would you recommend?
Cheers
Thanks Korben! The Eb48 2.0 is a legendary rig, already! The ET410.2 needs some power...I'm using a 5.5t HW motor (for indoor), but you can also drop in a 540 canned 4 pole like the 3652 Xerun (for outdoor) - I've ran the 5100kv before in the regular 410 with the XR8 SCT pro - it's rocket either way
@@TheRCNetwork cheers mate, you are a legend!
Wow, amazing 1/10 buggy... was that a Tekno Short Course also at 6:32min.?? 'cause the thing was hauling ass!!
Check out LC Racing's LC 10B5 and let me know what you think. Excellent vid as always......👍
Just did (I've seen them before) - it looks good, but 90% of the issues will be getting parts/support. Most tracks wont carry the parts if you break........as an example, I drove to my local track a while back - 40 miles one way and paid my fee ($20). I hit a wall in my B44.3 with in 5 minutes. I had arms with me, but I also bent the hinge pin. The shop had the parts on hand for $8 and I was back up and running . The LC10B5 goes for $349. for $50 more you can have a EB410.2.....or even for $299, you can have a EB410. That extra $50 will pay off in the long run with driver set up sheets, part support, forums on FB, etc
@@TheRCNetwork I agree totally.......but my question izzz......who copyrighted the design 1st? Xray? Yokomo? Team Associated? Team losi? Corally? LC Racing? Tyco? Tonka? Toyota? I meeeaaannnnn ........🤣😂🤣
Small world! I have a BRAND SPANKING NEW B44.3 Roller I'm putting together also! Good "ol fashioned" quality old school treacherousness! (Is that even a word?) 🤣😂🤣
I don't know which motor I like better in my 410.2 my Reedy sonic M4540 5.5t or my hobbywing 6.5t.
Hands down the HW. I've never like the reedy stuff
Hah I love the bloopers, is the 410.2 better to drive? How is the steering?
Compared to my stock set up EB410, the EB410.2 seemed to jump and land better (when I actually hit the landings), had more steering and was more stable, it seemed
Any tips for the rear end stepping out due to the front weight bias?
I'm still running stock set up and it seems so well balanced
@Rich Rc network how have you done in races with your Eb 410.2?
Unfortunately, OCRC shut down before I could actually race this one.
@rich rcn is there a handling difference between the 410 and 410.2?
Yeah, I felt that the 410.2 was much easier to drive...more stable and easier steering with the box set up
i want to buy a tekno eb410.2 or a good buggy for beginners to ride maybe competition. which ones do you recommend to me
All Tekno buggies are kits. and need assembly, electronics, paint and wheels/tires. If, as a beginner, you can get over that hurdle, it's a great platform, easy to build and drive and VERY durable
Could this be converted to a 1/10 scale DB48.?
Did you end up keeping the stock cst diff and shock fluids?
Yep, the stock set up was solid!
@ RCNETWORK-RICH is there a performance and handling difference between the EB410 and EB410.2
yes, IMO, the .2 seemed to drive just better all around. Better steering, better jumping and landing and felt much more stable
@@TheRCNetwork Ty rich your awesome
I just finishing building my EB410.2. I’m having a hard time finding wheels down here in Florida. What wheels do you guys recommend?
Drive on over to JConcepts! or follow the links in the video description
Hearing the chassis slap on the landings, that clay must be rock solid. Ouch!
That's kinda how all clay tracks are. They are only soft after each track build, they the get hard. How soft you keep them after that depends on the situation. The harder/drier the track, the more wear and tear on the tires, but you got great grip. The more soft/wet the track, the less wear on tires but hard on grip. That's especially hard on 2wd buggies in moist conditions. As for the hard track hurting the chassis, not really. It takes a long time to wear out most chassis, usually by collision impacts. The hard track will wear out tires however.
Yeah, most of it was my amateur driving, not hitting the landings...but hey, I'm improving! Like gpage said below, OCRC is a Clay track that has misters to keep is moist and hard, so tires last pretty good
@RCNETWORK-RICH which drives and handles better the TLR 22X4 or The EB410.2 and which has less issues
IMO, the Tekno was easier to drive. The TLR was nice, but it seemed fragile in comparison.
I love my tekno 410.2. I just don't know which turn motor I like better a 5.5t or 6.5t.
I thought so I just wasnt sure. Tekno makes a solid product easy to maintain and easy access to all 3 diffs.
Are those the 2wd ellipse front tires. Thanks
Nope, the 4wd
@RC NETWORK Rich which handles and Drives easier, The EB410.2 Or The TLR 22X-4?
Between the two, I still prefer the Eb410.2. I feel that I have more control with it...a bit better on jumping and landing and quite a bit more durable
@@TheRCNetwork Thank you Rich I appreciate you. Aaron
Are the handling performance and easy to drive characteristics with the EB 410 AND EB 410.2 the same?
killler footage
Thanks Larry! Unfortunately, OCRC shut down as of yesterday......
God I want one. My RC10B64 got crushed by a truck.
As soon as I got the first version of the EB410, I sold my B64d...and this version is even better!
How did the bulkheads hold up for you? I cracked the front my second race
Really weird - out of the 2 EB410's 1 Et410 and 1 EB410.2, I've never cracked a bulkhead...and you've seen my bloopers at the end!
how come nobdy paints the wings?
Normal racers that crash (like me) go through wings like water....
@@TheRCNetwork i see
Do they have an RTR version of this biggie??
Tekno only makes kits, but are super easy to assemble. It also gets you good knowledge of the car when assembling, so when you need to do maintenance, it's easy
@@TheRCNetwork yeah that's why I'm going with a kit to relearn everything and be able to build what I want prolly go off a pros setup or something to start with till i get feel for car
@@TheRCNetwork so what all would I need to complete tekno kit or any kit for that matter?? I know motor,esc, radio, servos, transponder what else??
Wheels, tires. Watch any of my recent "build Review" videos - I go over everything you need.
Is there some sort of rule that doesn't allow any other color rims outside of yellow and white, sheesh!
Wheels are such a consumable item in racing…..you’ll usually have 8-10 sets of wheels and tires at a race, depending on track conditions and how they get consumed by grippy tracks. It’s like the wings, no one bothers to paint them, as they get replaced every weekend
New track set up?
This one just changed recently...but just slightly. I believe this was the Fall Brawl set - fun track layout
im dying to know. is that on 2s or 3s?
2s....which is only allowed for this class
@@TheRCNetwork thanks so much. i just got 6 pro tek 2s 4900 mah batteries, super happy with my eb410.
I think that you could have cleared both of the triples
Remember, this was a freshly built rig, fresh tires on a fresh layout (for me). I started hitting the triples at the end....this filming was the first time driving the car
Looks slow and has no mid corner rotation on the back end. Aloot of chassis slap too. Might want to adjust your shock oil and ride height
Just showing it 100% stock with some one those than Tebo driving 😉.
5.5?!!!!!
Yeah, it seemed actually slower than my EB410 with the same electronics, but a 6.5t
Not bloopers Rich durability test
Was it called the Durability Montage? from URC? Yes, it is durable - and proven