I love how you take old and worn out and turn it into new and beautiful again! You are a true artist my friend and you have the most satisfying and peaceful videos on CZcams! Thank you very much for sharing!!!
Whenever I see the black dye come out I cry a little inside. The natural edges look amazing, even on black boots. As always amazing work man, wish I lived close enough to visit. ✊🏻. Keep atter.
Good to see that some old trades have found their way to a new generation. My first job when I left school was Shoe Making. All hand made from scratch. That was 32 years ago. There are few craftsmen left, good to see your skills and expertise. Keep it up.
Every Sunday evening as the long week winds down, I watch your video just before lights out. It sets my soul at rest. Keep up the great work and wonderful videos.
Such craftsmanship. I would never put a heel on a wedge soled boot but just my preference. I’ve had my Thorogood moc toe wedge sole boots resoled many times. Had them for close to 9 years and just clean and polish them and change out the insoles. Love watching these videos.
Those boots came out beautiful. Your videos remind me of my family's shop, watching your work i can remember all the smells of the glues, primer, the dyes, and the candy my great uncle Jimmy always had stashed in a drawer by the sewing machine.
Fantastic craftsmanship. I could watch your videos all day. I like seeing the polishing, too. I used to polish my dad's shoes and boots when I was a kid. There's something soothing in polishing. Have a great day
Jay Teverzczuk agreed. Wedge soles rock for those types of boots. I have a pair of wedged boots I would like replaced but not sure if they have wedge soles laying around at shoe smiths or at my local peach cobbler.
Nicely done. I like how you make sure the heel sits as it should when on the boot. Nothing worse then seeing an unbalanced pair of boots, you know they're junk when you see that.
Very skillful. Love the craft. But those and many other red wings you rehab should be brought back as blown rubber soles. That’s what makes a red wing comfortable.
superbe boulot de l' autre côté de la planète j' admire la maitrise , le travail , la passion avec laquelle vous faites ce job et la simplicité de la vidéo et de votre feeling .........................................:-)
Nice job as always. They look better than the way the factory made them. My Role Club shirt came this week & it’s terrific. Advertising for you in the heartland. 👍☮️🌞
Back in the days we used to tell people that didn't care about their workmanship we called them a shoemaker. After watching this, I'm not to sure about that statement anymore.
I have a pair of 8165 which looks as worn out, if not worse than this 9075. If only I stay in the US too, then I can send my boots over to Brian to resole and fix... :(
Brian, it seems like all the videos that I have watched of yours, you pull and replace the welt. I have not seen all your videos, but many of them. Is this industry standard? Is it a personal preference? Is it a craftsman standard practice? Should the welt always be replaced? Is it ever proper to leave the welt? Thanks for your videos, I love them.
Question for you, why didn't you put the same type of sole back on the red wings? Did the customer ask for that type of sole that you put on? It changed the entire look of the boot and I'm not sure I like the look that the new sole gives the red wings.
Buenas noches desde Valencia Spain, soy Artesano de 4 Generación, yo Vivo junto al Mar Mediterráneo y soy Feliz por ello, y junto a mi Mujer, desempeño desde hace 37 años mi Trabajo, un Fuerte abrazo de un Compañero de Oficio.
how do you recondition the beat and worn leather? Do you just polish and coat it till its refreshed or is there more to the process? I recently had a pair of Haix boots referb by a company Haix uses and it was amazing to see the work and then I stumbled on your youtube and i get to see some of it at work too. Awesome job on the videos and the resoles we get to see you do.
Me gustaría que te pusieras algún tipo de protección en los dedos para cuando aprietas el hilo alas botas , así no te las tomas y a la vez la apretada es más fuerte . Gracias eres un buen alumno
I like your channel. Takes me back to my days as a cobbler. You might want to consider mixing the music a bit lower though. Also I noticed that you seem to resole everything the same. If the owner had said they wanted a new set of white foam soles lkke the boots originally had would you do it?
Always beautiful job! I’m a bit worried about the stitching exposed right on the surface of the bottom of the sole though. Wouldn’t the stitching be broken when the strings comes in contact with the ground after walking a few miles?
I am a big fan , Thanks for the Videos. I would like to see some other repairs. Maybe someone has a big tear in the leather and needs patching. Do we do something to make the other boot look the same or not? Thanks again.
Dang, there was plenty of life left in those old soles, no? Ah well, loved the vid anyway and those new soles KA, even if he just did a half job (one boot) 😂
I love this, but I'm also curious about the price customers pay for this? I had a pair of CAT shoes (some design that's awesome but no longer around) and the cost of replacing the sole would've been around C$100, so I didn't do that :( I bought a pair of new shoes.
I never see you recork ur boots...odd..especially redwings which state that the cork molds to ur foot for a better custom fit. Is there just a void between the midsole and boot?
Can you talk about the picture in the wall behind you? Is it someone who’s boots you fixed or a family member? Sorry if I’m being to nosy but it’s just curiosity.
I love how you take old and worn out and turn it into new and beautiful again! You are a true artist my friend and you have the most satisfying and peaceful videos on CZcams! Thank you very much for sharing!!!
Whenever I see the black dye come out I cry a little inside. The natural edges look amazing, even on black boots. As always amazing work man, wish I lived close enough to visit. ✊🏻. Keep atter.
Same 😅😬😅
I agree, love the midsole in the natural color.
Me too man 💔
You right
11:47 Best look of a Red Wing Moc Toe I've ever seen.
This is what I want for my 8890s.
Totally outstanding
Good to see that some old trades have found their way to a new generation. My first job when I left school was Shoe Making. All hand made from scratch. That was 32 years ago. There are few craftsmen left, good to see your skills and expertise. Keep it up.
This never gets boring :-)
Every Sunday evening as the long week winds down, I watch your video just before lights out. It sets my soul at rest. Keep up the great work and wonderful videos.
Dear Brian the Bootmaker;
I must admit, I really enjoy watching you work. Truth.
Such craftsmanship. I would never put a heel on a wedge soled boot but just my preference. I’ve had my Thorogood moc toe wedge sole boots resoled many times. Had them for close to 9 years and just clean and polish them and change out the insoles. Love watching these videos.
Thanks for a super episode, and for putting the music back on.
Love your skill and dedication.
I can never ever get bored of watching this chap work , he's a true craftsman
Those boots came out beautiful. Your videos remind me of my family's shop, watching your work i can remember all the smells of the glues, primer, the dyes, and the candy my great uncle Jimmy always had stashed in a drawer by the sewing machine.
You put out some great content, the music is part of your videos charm. This kid has skills C/S
So this is what happened to little Miguel after Coco. Glad he took up the family business.
Fantastic craftsmanship. I could watch your videos all day. I like seeing the polishing, too. I used to polish my dad's shoes and boots when I was a kid. There's something soothing in polishing. Have a great day
Another Great video ! I love seeing / watching someone who takes great pride in their work ! God Bless !
Brian, with your talent, teaching and humility, you inspire a lot of people, just like me to work with shoes. My respect and gratitude to you.
Thanks Brian. I love the way you restored this boot. Thanks for sharing.
I'm really addicted when you say "beautiful people"
So I’m guessing the customer wanted to with that type of sole. But man, just doesn’t look as good without the wedge sole.....
Jay Teverzczuk agreed. Wedge soles rock for those types of boots. I have a pair of wedged boots I would like replaced but not sure if they have wedge soles laying around at shoe smiths or at my local peach cobbler.
@@michaelfedorsha8147 Most cobblers carry Vibram Morflex soles
Yea those soles look terrible on there. I actually dont like the way that brand of soles look at all on any shoe
Nicely done. I like how you make sure the heel sits as it should when on the boot. Nothing worse then seeing an unbalanced pair of boots, you know they're junk when you see that.
Those new soles really transformed those boots. So much nicer than the wedge soles.
Very skillful. Love the craft. But those and many other red wings you rehab should be brought back as blown rubber soles. That’s what makes a red wing comfortable.
superbe boulot de l' autre côté de la planète j' admire la maitrise , le travail , la passion avec laquelle vous faites ce job et la simplicité de la vidéo et de votre feeling .........................................:-)
You're a true master of the art..keep going man..much love and respect
Great craftsmanship 👏👏👏👍🇬🇧
That's some hard work using the awl to perforate then sew the new welt on the base of the boot.
Better than new. The passion of this artisan shows through his craft.
Great skills. A lost form of art.
My daughter noreen say you are amazing work.
Azhar Abbas Naqvi thank you 🙏 😊
You’re the man! Love all the vids. Maybe change the music around? Keep up the amazing boot art
Awesome work Sir.
Promise to myself >send in a pair of boots 🙏. Beautiful work!!
You have Money for that?
He is not Cheap 😒
Quality isn't cheap.
Always something soothing watching a skilled craftsman at his trade.
Nice job as always. They look better than the way the factory made them. My Role Club shirt came this week & it’s terrific. Advertising for you in the heartland. 👍☮️🌞
Thank you. You’re the best
The end result is fantastic, they look way better than with the original sole.
Understanding that things change. But, I wish you would add prices for the jobs you do in the drop down. Love watching everything you do.
A master at work!!!!
Much better than the original !
These boots came out AWESOME my brother.
You sir, is an artist! Keep it up!
Back in the days we used to tell people that didn't care about their workmanship we called them a shoemaker. After watching this, I'm not to sure about that statement anymore.
They look amazing! Awesome work!
Wow... That's it...just WOW!
Hi Brian me gustan mucho tu videos es todo un arte y tu un Master. Gracias por compartir, saludos desde México
Very nice job!! I always enjoy your videos and watching you work. I know the job requires much skill, but you make it seem effortless...🤔🤔🤔
El arte de hacer Calzado,excelente en lo personal trabaje en calzado,un oficio casi extinto saludos desde Costa Rica,pura vida.
The boot looks better now respect brian great wirk
This dudes got sole! Lol
You do beautiful work the souls you put on are much nicer than what you took off
Now that’s an improvement
a Mexican in Colombia congratulates your work, greetings and blessings
I have a pair of 8165 which looks as worn out, if not worse than this 9075. If only I stay in the US too, then I can send my boots over to Brian to resole and fix... :(
Brian, it seems like all the videos that I have watched of yours, you pull and replace the welt. I have not seen all your videos, but many of them. Is this industry standard? Is it a personal preference? Is it a craftsman standard practice? Should the welt always be replaced? Is it ever proper to leave the welt? Thanks for your videos, I love them.
That's old world craftsmanship right there!
Greetings from Canada, Brian.
Keep up with the great work!
Hey Brian when Will you come out with t shirts, I think they would sale like hot cakes,great Job, God bless see you on next reaction
What does a resole like that cost? Absolutely beautiful! Great Video
Bravooo👏👏👏👍👍👍👍
Very nice job. You are a true artist.
Question for you, why didn't you put the same type of sole back on the red wings? Did the customer ask for that type of sole that you put on? It changed the entire look of the boot and I'm not sure I like the look that the new sole gives the red wings.
I enjoy watching all your videos such a Geat Craftman keep up the Great work keep those videos comming
Buenas noches desde Valencia Spain, soy Artesano de 4 Generación, yo Vivo junto al Mar Mediterráneo y soy Feliz por ello, y junto a mi Mujer, desempeño desde hace 37 años mi Trabajo, un Fuerte abrazo de un Compañero de Oficio.
how do you recondition the beat and worn leather? Do you just polish and coat it till its refreshed or is there more to the process? I recently had a pair of Haix boots referb by a company Haix uses and it was amazing to see the work and then I stumbled on your youtube and i get to see some of it at work too. Awesome job on the videos and the resoles we get to see you do.
Excellent work!
Nice to see a young Craftsmaster "crafting"..👏
wow that transformation was beautiful, it looks more like a military style boot
How much does something like that cost?
Tree fiddy
Me gustaría que te pusieras algún tipo de protección en los dedos para cuando aprietas el hilo alas botas , así no te las tomas y a la vez la apretada es más fuerte . Gracias eres un buen alumno
I like your channel. Takes me back to my days as a cobbler. You might want to consider mixing the music a bit lower though.
Also I noticed that you seem to resole everything the same. If the owner had said they wanted a new set of white foam soles lkke the boots originally had would you do it?
Beautiful job on those shoes.I'd love to walk miles in them.
Nice job, well done. Like the replacement sole. 👍👌
Are you able to make the replacement sole less thick than the one you put in?
Wow awesome work love those boots
Great and beautiful work!
Thanks for sharing
Love the content señor as always Brian !!
Always beautiful job! I’m a bit worried about the stitching exposed right on the surface of the bottom of the sole though. Wouldn’t the stitching be broken when the strings comes in contact with the ground after walking a few miles?
You do great work!! Your videos are great. Why do you stitch at the level of the sole instead of etching a groove like I've seen in other videos?
Why don’t customers ask for the original white wedge sole? You always do the same sole with a heal cap. Never a a crepe sole. Just wondering.
Great craftmenship dude keep it up.
I need to find a 9 men’s 1000 mile boots to be resolved; because I want them “broken IN”! New ones TOO Much for my feet!
totally transform them into a new boot
The music sounds like Mumford and sons.
Kick ass work brotha✊🏼
I am a big fan , Thanks for the Videos.
I would like to see some other repairs.
Maybe someone has a big tear in the leather and needs patching.
Do we do something to make the other boot look the same or not?
Thanks again.
Great work as always Brian. Hope I can visit your shoo one day
Amazing work as always!
Wish red wing would sell them with a sole similar to this one, I hate the traction tread sole
A successful transformation into Beckman 9010´s this was.
Awesome work
WAAAAAO GREAT JOB
Hello from Dublin Ireland ☘️👍 😁 really appreciate your knowledge and skill
Dang, there was plenty of life left in those old soles, no? Ah well, loved the vid anyway and those new soles KA, even if he just did a half job (one boot) 😂
Great work bro! love the hat
Better than the original!
I love this, but I'm also curious about the price customers pay for this? I had a pair of CAT shoes (some design that's awesome but no longer around) and the cost of replacing the sole would've been around C$100, so I didn't do that :( I bought a pair of new shoes.
As always a happy set of feet await ! Bravo fine young man....
Thanks B! hope to get my T this week.
Great background music as always.
Those boots look like there Nick from Stridewise's boots
Muito lindo seu trabalho.. amo botas ! Deus abençoe sempre infinitamente!! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
I never see you recork ur boots...odd..especially redwings which state that the cork molds to ur foot for a better custom fit. Is there just a void between the midsole and boot?
Can you talk about the picture in the wall behind you? Is it someone who’s boots you fixed or a family member? Sorry if I’m being to nosy but it’s just curiosity.