Thanks dude! Still a ton of work left to do. But stoked with how it’s going evolving. Can’t wait to start on the rears now. Going to need at least 10’s on the rear.
I friggin love this build it’s always inspiring and makes all types of crap start running through my head about what I might be able to achieve with my own car …good job dude 👍
When you blank off the indicators you should leave one side open and run a duct to the turbo intake when you wrx swap it or just relocate the turbo directly behind it. I love the look of a turbo behind the light.
Your attention to detail is so high and good! The filler and glass work is top class also! Well done. Yep, the indicators really do make a massove difference! Love seeing your work. Well done!
Thanks you so much dude! I’m always trying to better myself and going all in with the details….I don’t have any time frame so it’s going to be full on and as close to perfect as possible.
Have I mentioned that you REALLY should do this stuff for a living?! I can't unsee the ur-Quattro influence to the front end - looks so good. A+ And I'd repaint the logo on the intercooler 🙂
Ah thanks dude! It’s definitely the dream to do this kinda thing full time. I’m hoping that if I put in enough time and effort into this it’ll open up the doors for me to do it full time. It’s all I want to do. I’ve been thinking about it 🤙🏻
You might be able to get started on the 3D stuff by using a laser scanned model from Forza/GT. Loving the glass work, but I do hope that leading edge on the front of the end-cap will get softened out, looks pretty sharp 😅 Would be quite cool if you 3D printed a new fog light blank where you can recess an LED strip or something in it to give some downwards lighting on a WRX/STI badge/sticker, or maybe brake duct cooling? 👀 Top stuff!
That’s a good shout dude! Don’t worry, the edge does have a radius on it, it just doesn’t show well on camera. Plenty of time to mess with things if I want to! So many options dude!!! Don’t want to go too crazy on the lighting front, but it would look cool 😂
have a look a suberino automotives write on what needs to be done for EJ swapping the brumby/brat. from memory, the chassis rails need to be notched to accomondate the DOHC ej engines, epic build as always
btw i found my new bumper to replace that ugly belt looking bumper for my corolla by measuring the width of the car to the bumper that on the other car which have to be longer than original width(my corolla width) slight trim make use mount she's mint
Dude that Mishimoto looks right at home in that spot. And those turn signals are perfect! Looking good Chris!
I know right?! It’s a silly thing to buy at this stage, but I just wanted to have the image in my head play out for once 😂
Front end is looking awesome. Loving it all 👍🔥 15:58
Thank you dude. Definitely spending a lot of time just staring at the thing and smiling 😂
That front end is gonna look great. The skirts are wide as hell! Its gonna look mental 👍
Thanks dude! Still a ton of work left to do. But stoked with how it’s going evolving. Can’t wait to start on the rears now.
Going to need at least 10’s on the rear.
Your work is always so astonishing the brat’s latest evolution is absolutely amazing ❤
I friggin love this build it’s always inspiring and makes all types of crap start running through my head about what I might be able to achieve with my own car …good job dude 👍
Thank you so much dude! One of my main goals is to inspire people to get stuck into their own projects.
When you blank off the indicators you should leave one side open and run a duct to the turbo intake when you wrx swap it or just relocate the turbo directly behind it. I love the look of a turbo behind the light.
Some great ideas dude! Love hearing what other people would do.
You kinda go snow blind after a while 😂
@@BuildCreate I hear that lol. My cars been needing a final touch cosmetically for a while but I can't figure out it needs so I hear you 🤣
Your attention to detail is so high and good!
The filler and glass work is top class also! Well done.
Yep, the indicators really do make a massove difference!
Love seeing your work. Well done!
Thanks you so much dude!
I’m always trying to better myself and going all in with the details….I don’t have any time frame so it’s going to be full on and as close to perfect as possible.
As always, hooked watching you work and listening to you. That front end is going to look so hard. ❤️🔥👏
Thank you dude! There’s so many little details and ideas that are hard to explain without sounding like a complete bore 😂
Have I mentioned that you REALLY should do this stuff for a living?! I can't unsee the ur-Quattro influence to the front end - looks so good. A+
And I'd repaint the logo on the intercooler 🙂
Ah thanks dude!
It’s definitely the dream to do this kinda thing full time.
I’m hoping that if I put in enough time and effort into this it’ll open up the doors for me to do it full time.
It’s all I want to do.
I’ve been thinking about it 🤙🏻
Front mount looks so good! Will be better for intake temps when you do the swap too. 😎🛠
@@KyushaStyleTuning I’ve been wanting to get one for the longest time. Definitely jumping the gun but it looks so good!
You might be able to get started on the 3D stuff by using a laser scanned model from Forza/GT. Loving the glass work, but I do hope that leading edge on the front of the end-cap will get softened out, looks pretty sharp 😅
Would be quite cool if you 3D printed a new fog light blank where you can recess an LED strip or something in it to give some downwards lighting on a WRX/STI badge/sticker, or maybe brake duct cooling? 👀 Top stuff!
That’s a good shout dude!
Don’t worry, the edge does have a radius on it, it just doesn’t show well on camera. Plenty of time to mess with things if I want to!
So many options dude!!! Don’t want to go too crazy on the lighting front, but it would look cool 😂
Screams a cool louvered air intake where the old indicator and light unit is that your removing and the whole grill assembly would look like one
more amazing progress! that front end is looking so good!
Thank you dude! I’m stoked with how it’s starting to come together.
Also super happy people are getting buoying the progress.
Looking very cool.
Thank you sir!!
Keep at it; The front is going to looks so cool.
Cheers dude! So happy with how it’s turning out so far.
With the additions I have it mind, it’ll take it even further in terms of aggressiveness.
@@BuildCreate Im really digging your STI style blanks you are going to do.
have a look a suberino automotives write on what needs to be done for EJ swapping the brumby/brat. from memory, the chassis rails need to be notched to accomondate the DOHC ej engines, epic build as always
I’ve got that one saved for when the time comes 😉. Tempted to send over the look to them to work their magic.
Fuckin sweet, Chris! You’re awesome
@@wadeharder195 Ah, thanks dude! You’re far too kind!
Looks so good man. Make me wanna sort the teg out 😂
Cheers homie! You definitely should!!
Looking great
You should turn the secondary light and inductor into ram air with a clean mesh
Definitely a possibility dude! Love hearing other peoples ideas!
Very cool as always.
I appreciate that dude!
Dope!
Thanks man!
btw i found my new bumper to replace that ugly belt looking bumper for my corolla by measuring the width of the car to the bumper that on the other car which have to be longer than original width(my corolla width) slight trim make use mount she's mint
Sick as build. im currently building a 85 gl wagon drift car ea82 with a supercharger wanna make a street style look
Oh rad! You on IG?
@@BuildCreate yeah but don't really post stuff. Its brenton_exe
Will you model the blanks to match the grille?
Possibly dude. Got a couple of options that my friend and I are brainstorming 😉
Chris, Another solid video, Do you do tool reviews? We released a portable air pump. Can we invite you to do a review? We have emailed for an inquiry.
Is it just me ..or would the ke70 quad lights look good and fill the front out..?
It would! The Australian front end comes with quad lamps!
I’m tempted, but I love the singles too much 😂
Thats probably where ive seen them, im from Aus lol. Loving the progress man keep grinding!
Is that a performer? Took you for the Torker type.
I wish was either of those 😂. It’s an early 90’s Royce union I picked up about 15 years ago from a local used bike shop.
It rides great though!
@@BuildCreate If ya squint it’s mint 😎 cool nonetheless.
Looking great
Thank you dude!