Koi fish cutting board / butcher block. Zieba board #3. Cnc inlay. Wood inlay 4k video.
Vložit
- čas přidán 15. 03. 2020
- The board size is 18*12*2 inch.
Michael Zieba:
www.ziebaknives.com/
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - Jak na to + styl
''Beautiful'' no other word for that. Too beautiful to use, but you'd never get tired of looking at it and having it as a piece of art.
Thank you very much!
There's a better word than 'beautiful'. How about 'ridiculous'! No one else would even think of attempting this. This is the difference between a woodworker and a master.
This is one of the most beautiful and creative cutting boards I have ever seen.
This is one of the most beautiful pieces i have ever seen! Well done! Thanks for sharing.
Beautiful work! The ART is in having the vision to use technology in such a creative way. Thank you!
"The Art is in having the vision to use technology in such a creative way." Well said, as a designer who uses a C02 laser to cut wood is by no means taking an easy way out. Its the creations that are thought of with the use of our inventions. We have the tech and if we will evolve in our craft we must use tools. Heck if all is said to be true don't forget we supposedly used advanced alien tech to build some of our most beloved historical sites
Masterpiece! I would never put a knife on it though, rather to have it as a beautiful display. How ever, this gave me an idea how I want my front door!
I’ve only just found this channel these boards are amazing
That inlay process was incredible.
Would be impossible to use as a cutting board...just absolutely too beautiful!!! I would gift it to someone to hang on their wall and I would get one for myself too. Stunning 😍🥰
I never knew it was one piece as an inlay. It is beautiful as ever so clever.
one word: GORGEOUS.
i'm in love with the work of art.. KUDOS.
Very clever process and beautiful end result! Thank you for sharing this👍
This is art! Wow! I really wanna use that cutting board in my life
My goodness this is BEAUTIFUL!!!!
Great video. It would also be nice to see how you start the process for the cnc. How you program the software with the used picture for the inlay, etc.
Such fantastic workmanship!! It’s absolutely beautiful. It’s too gorgeous certainly to chop fish on!! Work of art!! 🙏🙏🙏
Who could ever use it as a cutting board? Amazing piece of art work.
Absolutely beautiful. Wow!
once I watched this kind of work in Bali, fish side sculpted by hand in palisander. I still remember it after so many years. Hats off here as well we westerner have no time
A work of art. Beautiful!
Thank you!
Amazing work! Pure art. I have seen similar work before in Beijing. Except the inlay was done in silver. Very nice ...
Do you have a video on the designing part of this? I would love to see the full process and your thought process behind it from start to finish.
No see to make the design from scratch, you can download a vector file from a stock photo site and make adjustment to fit your needs.
I've always been a huge fan of woodworking, ever since I was a teenager. Well, I'm MANY, MANY years past that, but this machine makes the most amazing projects I've ever seen. I'm too scared to even LOOK at the price of one of them, since I know it will be well outside of my range of affordability, but admiring the work it produces is enough for me. Can't wait to see the other projects. The quality of craftsmanship it produces is unparalleled to anything I've ever seen before. Just incredible!
Amazingly gorgeous!
You are an artist in every sense of the word Sir!!
That is truly a piece of art!
Hahaha cutting board, man I would hang this up in ky fish tank room as art, amazing build, skills, and ingenuity. Two thumbs up.
I am so impressed by these works that I have decided to make one as a gift for a family member. No, I will not be copying the design, but I will be using the technique. I have done similar inlays but not with end grain and not using a tapered ball nose cutter. I am a hobbyist so I will not be selling these either.
Really outstanding work! Thank you for the inspiration.
I forgot to mention, the board I make will be used. End grain cutting boards last almost forever, they are nothing like face grain boards sold all over the place. The board will not be ruined by using it.
@@TReischl1 Did you make it? I don't see it in your channel? Also, what is the difference between end and face grain boards? How can you tell? (not a woodworker, thinking to get into it, maybe as a sideline).
@@ibubezi7685 long grain the grain will travel from left to right or top to bottom. face gain means it travels from bottom of cutting board to top.
@@TReischl1 Thanks for the recommendation! I didn't know that
@@ibubezi7685 Yup, got it made, after a few trials and tribulations, LOL. Biggest issue I had was attempting an inlay within an inlay. did not work at all. So I changed the design and it worked out well. I put very little of what I do on CZcams. Would end up spending more time posting vids than actually making things.
What a stunning piece of work ..... incredible well done a pleasure to watch
Отличная работа!!! Интересный и с моей точки зрения сложный перенос ресунка.Супер!!! 👍👍👍
"My First Cutting Board" 😁
I would never be able to let a knife come near it. Beautiful work.
Wish i could get me one of those boards, so amazingly beautiful ❤
WOW. I'm speechless. Amazing job.
DUDE .. that is way to beautiful to use as a chopping/cutting board .. looks awesome!!
That is just beautiful work! A real craftman at work!
Hats off to cnc... it did a great job!
I love seeing you make the walnut base now.
I was wondering why you were using a band saw over a table saw while cutting. What i figured is because its a smaller curf line on the band saw. Amazing work you do and i already told the wife im buying a board from you. Thank you for the awesome videos and workmanship. Keep it up
Instead of using it as a cutting board, I will use it as my pillow. It's way too beautifull.
wow that filling wood proces was amazing 👍
Your work is Gorgeous ♥
This is a very beautiful board. Whoever built the software is quite an artist...
Simply Stunning. This is taking Cutting Board design to the next level. Brilliant!
Thank you!
This video is the work of the artist who directs technology. Congratulations.
Now this what artists is, well done mate.
That’s so beautiful, I don’t know if I’d want to cut anything on it, lol
This is beautifully insane! I love it. Subscribed!
Absolutely beautiful work. Not sure that I don't admire the amazing computer cutting technology more than the magnificent job that would have been fully hand crafted before the invention of such machines.
The most amazing cutting boards I've ever seen!!!
OMG Wow Wow Wow that is amazingly beautiful inlay thats something to hang up for display
Excellent work! God bless you and yours!
these cnc routers are amazing, great project and design :)
Wow, that was some next-level stuff! Thumbs up!
Absolutely gorgeous! You could probably do some larger work and sell it as wood art. I'll bet people would really buy it up. Good luck you!
Just fantastic! You are a Master with a capital letter!!! Good luck And good fortune!
Seu trabalho é muito lindo, algo de extremo valor. parabéns.
Stunning..... just stunning!
I expected to see the design inlaid with resin. Which would have looked cool but this was a whole new level of impressive. Wow...
Amazing work, beautiful
Wonderful !!!! this is too beautiful to be used.
Clever and unique!
Thanks for the cutting board, I will put it on display (walks to the store to buy a cheap one)
Absolutely breathtaking
That is a really cool technique!
Am from Kenya and this kind of art is driving me crazy, I love your work. How much is the whole machinery?...
정말 만드는 정성이 예술일세....👍🏻👍🏻👍🏻👍🏻
Beautiful. Love this design.
too perfect ! , someone may think you had painted on it.
Truly a Quality work of Art!!!
O thank you. Amazing beautiful artwork.
One of my favourite cutting board on CZcams... Good job sir... your work make me speechless 🙏
It's amazing what machines can do now. I used to make jewelry by hand now a 3d printer makes it. The death of craftsman ship.
Beautiful craftsmanship I really like your art
I love it but I could never bring myself to cut on it. Great work you are inspiring.
😍😍😍🤤 I would like to do my kitchen countertops like this I’m in love 🥰 My entire tiny house is inspired mostly by Japanese culture
Trabalho maravilhoso. Parabéns!
To już nie jest zwykłe użycie CNC. To prawdziwy artyzm!!!
Gratuluję pomysłu, skoro opublikowany bez zastrzeżeń to metodę spróbuję skopiować. Pewnie poprzedzone to będzie wieloma wprawkami, ale wierzę że uda mi się. :)))
Fantastic cutting board, and very interesting to see the process.
What software did you use to create the artwork?
That is absolutely beautiful
Good. 이런걸 우리 조상들은 그 옛날에 도자기에다 하셨으니 참 대단하신 분들.. 상감기법이라고 들어는 봤나
Gorgeous!! I couldn't use it, only for kitchen display!!
That’s a work of art. One of the most beautiful cutting boards I’ve ever seen... thanks for sharing your amazing work. I don’t think I’d be able to cut anything on it though...
Thank you
Extraordinário, ficou top!
this is insane. amazing.
Stunning work.. Love your cnc
Very, very impressive!
One of the most grand things I have ever seen in my entire life
Why? The only thing he did is programming the CNC...
@@DriversFromHere the technology is also amazing
Stunning!
Is the first bit used a 1/8" or 3mm flat bit and the second a 6 degree 1/32 or 1mm bit? Thank you really enjoy these videos
stunning brotha amazing work 👌🏼
this is called the true creative mind, great job, I love it 👍👍👍👍
Thank you
simply beautiful :)
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
Most of my videos are a small report to my clients about their cutting boards and how they were made. I believe that it is very satisfying to watch it. And I really happy when you ask me to make a video because it is a special gift. Also, I want to say "Thank You!" to everyone who watches, liked, and comments on my video. I love your comments and always read them! I just do not have enough time to answer all of them.
Sorry:)
If you don't like the music, please turn off the sound :)
Thank you!
Answers for some frequent question:
The board was made of walnut inlaid with maple.
The time frame for a board like this is 3 weeks (if I'm not making other boards).
I use a lot of different types of bits from 6 degrees to 90 degrees. (read in description)
In this project, I have used 1/8, 1/2, 1/4 flat nose, and 15-degree v bit.
Feed rate 60 ipm for V bit.
For most projects, I use fusion 360, but also I use Ai, Vectric, Corel Draw, Inkscape, Ps.
For finishing my boards, I use that wax and oil broinwood.com/collections/cutting-boards-care
Why do I use a 1/4 flat nose bit for cutting inlay and surface? Because it does not make small chips.
Broinwood An incredible, interesting and very calming view of your methods of production. I did enjoy watching you perform your Art work. Thank-you for sharing.
You must have written wrong dimensions on this, isn't this a 3inch thick?
Ñññññññññññññññ
How much is your board?
What is your depth for your inlay? This is awesome
Holy shit!!! Bro! My jaw was dropped during that whole inlay process. You are seriously talented man. Great work!
@broinwood - Do you just resaw a few pieces to split open and make the inlay panel? Just trying to work through in my head how the inlay panels get made efficiently.
Beautiful, just beautiful.
Thanks!
Nice, that CNC machine is a skilled craftsman.
ابداع وتميز لإنتاج تحفة عاشت الايادي
That is some awesomeness!! Great vid!!!!
Spectacular beyond belief.
Дуже складна робота, але майстер зробив диво! Велика повага!