MITUTOYO Absolute AOS Digimatic Caliper : Unboxing (EN) & Tests (FR)
Vložit
- čas přidán 3. 11. 2017
- Modèle 500-196-30 :
- ecatalog.mitutoyo.com/ABSOLUTE... ,
- shop.mitutoyo.fr/web/mitutoyo... .
Précision : 0,01 mm.
Répétabilité : 0,01 mm.
Erreur de 0 à 100 mm : ± 0,01 mm.
Erreur de 100 (?) à 150 mm : jusqu'à ± 0,02 mm.
Conformité : JIS B 7507:1993 & DIN 862.1988 : 0.03.
Autonomie :
- 3 ans et demi en utilisation normale !!!,
- 18000 heures en continu (2 ans) !!!
Rendez-vous compte, 3 ans et demi d'autonomie comparée à celle, de l'ordre d'un mois ou deux, des pieds à coulisse bas de gamme !
Un record de disponibilité !
Le revêtement du vernier est agréable, soyeux, mais présente le défaut de s'enlever facilement, par exemple si on le raye avec un ongle.
On peut s'interroger sur le manque de graduations de la règle mais cette graduation suffit bien à l'estimation rapide et, vu l'autonomie de l'appareil, on n'aura guère l'occasion d'avoir besoin d'une graduation plus détaillée.
[AOS : "technologie exclusive de codeur (Advanced Onsite Sensor). Ce codeur breveté offre une fiabilité de mesure améliorée en augmentant la résistance de la règle aux conditions sévères en atelier. Grâce au codeur AOS à induction électromagnétique, ce pied à coulisse peut être utilisé sans avoir à se soucier de la contamination de la surface de la règle pendant les mesures. Le signal de détection n'est pas affecté par la saleté (eau, huile, etc.) sur la surface de la règle."]
J'ai des réserves à faire sur la boîte qui contient le pied à coulisse :
- boîte par trop bas de gamme, trop large et qui ne s'ouvre pas facilement d'une main,
- le pied à coulisse n'est pas correctement tenu dans la boîte et pour éviter qu'il bouge, il faudra insérer une épaisseur de mousse en veillant à ce qu'elle ne fasse pression sur le bouton de marche.
Pour le reste, je verrai à l'usage, par exemple s'agissant de l'extraordinaire longévité de la pile (!!! "3 ans et demi en utilisation normale" !!!) et qui expliquerait le fait que Mitutoyo n'ait pas souhaité implanter la mise en marche automatique.
Mais alors pourquoi pas l'arrêt automatique ?
Pour revenir à la boîte de protection et de rangement, beaucoup trop grosse je le répète, pourquoi n'avoir pas proposé un étui en plastique rigide préformée aux dimensions du pied à coulisse ?
En plus, revenant alors à l'absence d'arrêt automatique et considérant qu'une simple pression sur le bouton de marche le met en fonctionnement, pourquoi n'avoir pas prévu un système "5 pressions" pour la marche et l'arrêt, système adopté sur toutes les alimentations de cigarette électroniques ?
Sur ce, j'ai des doutes sur l'authenticité de ce produit, valant 119 € sur le site du fabriquant et vendu 76 € sur Amazon :
- carton abîmé sur les bords,
- boîte non scellée par film plastique,
- pile déjà installée, une LR44, mais une pile SR44 est fourni sous emballage,
- le revêtement du vernier,
- aucune date n'est inscrite sur les documents joints.
Mais le sachet en plastique contenant le produit était bien scellé, la feuille anti-corrosion bien présente et le produit me semble bien fonctionner. - Věda a technologie
Oui, c'est un original !
Merci pour la vidéo !
Хорошее видео! СПАСИБО!
The sounds of the jungle make the tool accurate. The calibration is from the LOONY BIRD...
Agree with Micky, this is fake. Good observations regarding the differences with the original. In addition, the plastic bag is sealed differently, and the plastic scale is flush at the end of the caliper, whereas it is a little shorter in the original.Diezelle57: where did you buy it and how much did you pay? I hope you knew it was fake. You are totally right about Mitutoyo not being able to authenticate their products. Pathetic.But no matter how much lipstick, it is still a pig. The battery will run down in 3 months not 3 years, and the measurements will never be reliable, especially as the baterry drops in voltage.
Taratata, my Mitutoyo is a Mitutoyo, you are a jealous person :)
I would love some calipers a thousandth off or not? Respects
diezelle57 i meant the odd one then sorry your right yould need a micrometer for that !
The only problem I have is you filmed it outside with bug noises and I hate bugs!
Here is the points you can find on your caliper, to know it's a fake one :
1. Casing (Original one don't have foam)
2. Jaw (finishing is differ, looks good but still far from Mitutoyo)
3. Battery cap (below the "absolute" there is an arrow sign, three lines and the last is only a "dot" "." not a line. for the original)
4. Plastic quality (i see your caliper origin button edge is brittle and breaks by your nail. and also the batt cap quality is really bad compare to the original. the original one is smooth and very precision even under a magnifying glass)
5. the edges of the plastic parts is rough and the gap is too large. on yours.
Still have more points but better not to mention otherwise they will patch their fake products based on our comments.
But for sure..It's a Fake. sorry to say that..
it's like buying a fake IPhone with the Original price..
You're jealous of my Mitutoyo, it's good to see.
Buy a fake iPhone that does exactly the same thing as a real one, that looks the same and at the price of the real one, that shouldn't bother me too much :)
Your little cosmetic stories are ridiculous.
WELL WHEN I HAVE THE ORIGINAL ONE 500-196-30...WHY MUST I JEALOUS TO YOUR CHINA MADE SCRAP?
No, you idiot who doesn't understand anything! :)
I repeat : "Buy a fake iPhone that does exactly the same thing as a real one, that looks the same and at the price of the real one, that shouldn't bother me too much :)"
You can leave.
bonjour, après avoir lu et (tenté de) déchiffrer les commentaires anglophones et les réponses, je suis perplexe ! Que de fakes ! Serait-ce la jalousie qui fait parler...? et à qui se fier ? Comment et où acheter un Mitutoyo, un vrai, un authentique, pas une brillante copie..? En France, Mitutoyo a des revendeurs locaux, mais la plupart ne vendent qu'aux professionnels. si quelqu'un a un avis, une info, mais attention : pas de fake bien sûr ! 🤣 Merci à l'auteur de cette vidéo, et aussi aux commentateurs sérieux. Bonne journée à vous tous.
Phill Busardo vient d'acquérir un pied à coulisse iGAGING OriginCal IP54, c'est l’événement du jour.
www.igaging.com/page12.html
Ce modèle est moins cher que le MITUTOYO.
Est-ce le bon choix ?
Merci par avance de me faire partager votre expertise.
Actually this is probably a little better made fake that the $30 ebay ones, they've almost, almost got it right this time. But it is FAKE.
I am just holding a genuine Mitutoyo in my hand and: the Slider clamp knurled screw is a good giveaway, Mitutoyo screw has thread all the way up and the body is little shorter. But most importantly, the knurls on yours are rough and crude, the genuine Mitutoyo is more like a watch screw, very delicate with finer knurls. The knurls on yours look like just made quickly with a cheap knurling tool on lathe. You can put the genuine Mitutoyo screw under magnifying glass and there is virtually no flaw and all edges are perfectly round and many smooth bevels - quite impressive actually. The black and yellow measuring tape on the face on Mitutoyo has a fine crosshatch texture, yours looks smooth. The metal finish is not so polished either. Actually it is very crude in parts they could not polish easily like the beveled tips. You should see the smooth finish on Mitutoyo everywhere even in places that are hard to polish. Printing on the back - typical chinese shop print. You should see the delicate print on my Mitutoyo. You can take magnifying glass to it and it is sharp everywhere without any flaw and QR code is very delicate and perfectly pronounced - yours shows how the colors run together during printing... etc... etc... it is FAKE.
But no ! It's yours that's a fake! :)
Mitutoyo is unable to guarantee the authenticity of its products, it's great shame!
You can interface a Mitutoyo to an Arduino or Raspberry Pi. - czcams.com/video/dvt5wbQFnpQ/video.html
Looks legit. The battery packaging is a giveaway. Yours looks exactly like mine, which I got from a Mitutoyo authorised dealer (listed on Mitutoyo's website). I've seen some fakes and the battery printing on the battery packaging, and the packaging itself, look very different and crappy. Definitely looks good.
Thank you, you reassure me because I have been told over and over again that this is a counterfeit :)
These are good, but fake. Powered on as soon as you pulled from package with an LR44 installed, no red hue on jib screws, depth cut is too long, case has foam in it, printing is not all on left side and a few other hints. These are better fakes, but still not the real deal.
@@20X_ Only Mitutoyo could be a judge of the true and the false.
@@diezelle57 I agree, email them a link to this vid and they will tell you it is fake. I have been in contact with support a few times with pictures and followup pictures to make sure mine are real. It is a shame that such a high dollar tool cannot be verified by serial number or other easy way. The sad truth is that you have some fakes out there now that are almost good enough to fool the support guys at Mitutoyo. I believe mine are legit but without a unbroken certificate of handling from production to me, I would not bet on it 100%.
@@20X_ Obviously and I said it here, if Mitutoyo is unable to authenticate its products, it is his problem. So I do not know where Mitutoyo has the electronic part made (in China?) but it's clear that the fake ones are as good as the originals.
The Mitutoyo is a Chinese fake. 1.The depth bar does not have that deep of a notch. 2. The orange sleeves have no graphics other than the Mitutoyo name and the product (Digimatic Caliper). 3. The text on the label should all be on the lower left and be of the same font. 4. The gib screws should have red threadloc. 5. The jaws will not allow light to pass through. 6. The batteries do not come installed. 7. Amazon LLC is not giving a 33% discount. It is from a third party getting junk from China.
1) After good application of the jaws, they do not let the light.
2) The depth bar has a notch at Mitutoyo.
(3) The terminal inscriptions are those of Mitutoyo.
4) For the text of the label, I do not know, I have no comparison.
5 / Indeed, no red thread for the screws of the vernier.
6) Indeed, a LR44 battery is installed but an SR44 battery is provided.
7) For the price, this same product was sold more expensive but the price went down.
8) The serial numbers on the vernier label and on the certificate are identical.
9) Mitutoyo can not be said to be very good at making its products authenticatable (for example, by scratch code); it is lamentable of carelessness.
10) My caliper works perfectly.
11) 1) After good application of the jaws, they do not let the light.
2) The depth bar has a notch at Mitutoyo.
(3) The terminal inscriptions are those of Mitutoyo.
4) For the text of the label, I do not know, I have no comparison.
5 / Indeed, no red thread for the screws of the vernier.
6) Indeed, a LR44 battery is installed but an SR44 battery is provided.
7) For the price, this same product was sold more expensive but the price went down.
8) The serial numbers on the vernier label and on the certificate are identical.
9) Mitutoyo can not be said to be very good at making its products authenticatable (for example, by scratch code); it is lamentable of carelessness.
10) My copy works perfectly.
I expected it to be said that this is a clone! :)
But what to trust?
If it is a clone, it works perfectly ... 0 ... 154.04 mm ... go, back, on / off in any position, go, return ... 0 and 154.04 mm!
there are many videos on this subject but what proves that those in which are shown so-called genuine copies show genuine copies?
What no one says by cons and what I say is that Mitutoyo is unable to authenticate his products, that is grotesque negligence!
Cloneur Chinese friends, put a little red varnish on the apparent threads of the vernier, do not pre-install battery and sell Mitutoyo at a high price, do not be shy, since it is the price that is the only criterion of authentication! :)
I bought a 500-196-20 from a local certified Mitutoyo distributor, one listed on mitutoyo website. mine came with a orange sleeve carton with the same design. Everything you pointed out was true, that caliper is a fake. But the packaging they use has the same graphics as the authentic one.
Taratata, my Mitutoyo is a Mitutoyo, you are a jealous person :)
diezelle57 batteries came installed that’s a dead giveaway that it’s a fake. I bought one from a tool catalog with no batteries in it.
LR44 inside?
= ???
@@diezelle57 mitutoyo calipers need SR44 with silver oxide
LR44 are just normal alkaline
@@bamboelaa Need? No. It's just a question of longevity.
diezelle57 why not juist put a sr44 inside like the one they included , yeLR44\AG13 also work but SR44 arent that expensive
@@bamboelaa I do not understand the interest of your remarks. By the way, I changed the battery.
ASMR...
It's fake there is lr44 battery inside insted of SR44, also batteries are not prepared installed
Non, il a été livré avec deux piles 44.
First of all, let me start by saying that I'm a big fan of your CZcams channel. You have helped me buy several tools, both by watching your videos and answering my questions in the comments. Having said this you should watch the following video from a respectable machining tools channel: czcams.com/video/KG6I2gNGVwM/video.html
You must believe me when I tell you that I'm not jealous. I know I do have the original Mitutoyo 500-196-30 because I purchased it at the official MSRP from an official retailer listed in Mitutoyo's website. I also compared the 17 features (in the video above) that will help you identify an original vs a fake one.
I'm not going to make a final judgement about your calipers, but you should watch the video because I believe you got a fake one. A very good fake, but ultimately not the original product. And yes, I read your argument about the "fake iPhone", but still it doesn't make sense. Please keep up the good work!
Oui, d'accord², c'est une contrefaçon ! :) Heureusement, j'ai un SYLVAC, un TESA, un vrai MITUTOYO 4", deux iGAGING et un SHAHE (excellent produit et vraiment pas cher).
Yes, okay², it's a counterfeit! :) Fortunately, I have a SYLVAC, a TESA, a real MITUTOYO 4", two iGAGING and a SHAHE (excellent product and really cheap).
Merci pour l'intérêt que vous portez à ma chaîne :)
The depth bar is wrong, this is a fake. Diezelle57 is jealous and lies to himself.
Your jealousy is unhealthy, you should take a treatment.
This is 100% fake, no doubt! And there are many reasons to think so, it makes no sense to list them, it is obvious for someone who has the original MITUTOYO Absolute AOS Digimatic Caliper tool. If the seller convinced you that this is the real MITUTOYO Absolute AOS Digimatic Caliper for what You would have bought it and you paid more than $ 30 for this instance, then this is a Scam.
You are a 100% jealous.
I add that if Mitutoyo does not know how to authenticate its products, that's its problem. My copy works very well.
Dear diezelle57, it makes no sense to envy the 100% fake thing when I have the 100% original. Mitutoyo company has no relation to this product, because it makes no sense to authenticate it. What is immediately evident is the fixing screw and the color of the plastic body, just enough to authenticate from afar.. Well, it's good That your copy of "Mitutoyo" works correctly, but it does not change the essence, I hope you do not overpay.
@@NavyPLN Stop saying anything. You are not able to demonstrate what an authentic Mitutoyo is. Mitutoyo is unable to authenticate its products (scratch code, etc.).
Dear diezelle57, write me your mail in private messages., I will send you a photo of the original MITUTOYO Absolute AOS Digimatic Caliper tool. You'll see the difference. If you need such knowledge at all.
@@NavyPLN Private messages have been disabled by CZcams, which you knew perfectly ! :)
But... it's fake! Look at the block screw!
No, it's not a fake, but you're jealous!
@@diezelle57 yes it is, mitutoyo calipers don't come with pre-installed batteries, and if they did, they wouldn't use the lr44
@@TheGiuse45 Another very jealous person! :)
@@diezelle57 i do own a mitutoyo, best 150 bucks ever spent, I hope I am wrong about your caliper
@@TheGiuse45 Your jealousy leads you astray, I paid this Mitutoyo more than 130 € on Amazon and it was delivered, as shown in the video, with two batteries, including the battery that usually equips the caliper.
Is there anything more pathetic then a bunch of people arguing over the authenticity of an obvious chinese knock off? This video is creepy as hell to boot.
Fake one
Chinese
Jealous.
@@diezelle57 No, actually pissed I didn't buy last night, Amazon did the $20 more today.. by the way, yours are fake.
@@Ramblequist You are jealous of my Mitutoyo but, obviously, that can be understood.
@@diezelle57 lmao.. if you paid $30 then sure. The thing will eat battery though, so remove it.
@@Ramblequist Negative, I still have the original battery :)
LR44 battery... You've been scammed.
Mitutoyo is unable to authenticate its products, it's a shame.
@@diezelle57 yep. It's a crap shoot now. Tough to tell who's trying to rip us off.
@@AndrewSmith-qj5zv I ask you to express yourself correctly to make yourself fully intelligible. To know if a Mitutoyo is an original, just remove the battery, put it back and dashes should appear to set the origin.
Genuine Mitutoyos always come with an SR44 battery. Never an LR44, so if your caliper came with an LR44, then it's not a genuine Mitutoyo.
@@AndrewSmith-qj5zv My copy (bought from amazon) came with two batteries including an SR44. I confirm the test of the display to you when the battery is replaced for the setting of the origin. I know this because I also have a 4" from Mitutoyo, a real one! Chinese copiers will be delighted to learn that they can save an LR44 battery :) As for me, I bought by the continuation of the TESA, SYLVAC and iGAGING calipers. From now on, I no longer intend to buy Mitutoyo (which is manufactured in China) and which is unable to offer authentication of its products.
FAKE........
Jaloux !
@@diezelle57 it's still FAKE......just Google it boy.
@@rotaryphoneuser9726 Prove it, kid ! :)
@@diezelle57 I guess you can't tell real boobs from fake boobs either...lol. I said google it. There are tons of info.
This has to be the worst video I’ve ever seen
Abonnez-vous à notre chaîne au lieu de pleurnicher !
Scammer selling fake Mitutoyo calipers,how sad
You are spreading false claims.