Vevor Button Press - The Wins & The Fails
Vložit
- čas přidán 10. 09. 2024
- Thanks for Watching.
If you enjoyed the video, Please Like And Subscribe.
Below are my Social Media Links
Sign up to Amazon Prime for faster delivery
www.amazon.co.....
Blog: - allaboutbeaut....
Website: - www.beautifulc...
Facebook Page: - / beautbytina
Facebook Group - for beauty therapists and Nail Techs
/ 41598. .
Instagram : - Beaut - / beaut_by_tina
Instagram : - Resin Page - / beautiful_c. .
Etsy Store: - www.etsy.com/u....
Music thanks to Bensound.com
Hi Tina.. The bottom moulds are marked L ( for LEFT ) and R (for Right ). Unfortunately your button fails are due to you NOT using setting the machine correctly on your first LEFT press - with the button front, your design and the Mylar transparent cover. Watch some other CZcams videos to see what you are doing slightly wrong. Your first press needs to be done with the top press part locked UP ( not allowing the top section 3 little rods to pass through their holes. This makes the first LEFT press push your design DEEP into the top mould section. Your second RIGHT press ( with the badge back plate ) then needs to be performed with the 3 rods passing THROUGH the top 3 holes. This then all works perfectly each time. The vertical tags sticking up on the bottom LEFT and RIGHT moulds are there to catch the top moulds little stick out rod towards the rear -- and they SHOULD adjust the top mould part correctly when you slide the lower part across. You need to twist the lower part moulds slightly to align their rear sticky up bits. It will then automatically control the top section making the 3 rods NOT go through their 3 holes when you press the LEFT moulding... and let them through when you press the RIGHT moulding. All a bit finicky.. but once you master this you will succeed every time. Best wishes.. David(www.BorderLightsGallery.co.uk)
Thanks for your detailed help explanation, I will give that a go
Does your Vevor button machine still work after two years? I'm thinking of getting one but I'm worried it will break after a few months.
Thank you - I just bought a Vevor and had the same trouble and went on CZcams and found your awesome Vid - it helped me so much! Cheers!
My metal first part is not aligning with the circle on the press so then I believe it’s not pressing correctly, so frustrated!
Always love a lady with beautiful nails.
Thanks
Just got my machine, only to find they didn't even tap the connector/level base to screw in the level/handle. Here's another 2 weeks waiting on a replacement part shipment and praying I can figure out how to swap out the parts
Oh dear that’s not good is it
Did you ever figure out how to fix the issue with the right press mould? I'm currently having the same issue and I have no idea what to do
Someone else has commented on this video with some good tips
Nice
Thanks