SEGWAY NINEBOT G30 MAX FRONT WHEEL BEARING REPLACE | SEGWAY NINEBOT G30 MAX ЗАМЕНА ПОДШИПНИКОВ
Vložit
- čas přidán 10. 03. 2022
- SEGWAY NINEBOT G30 MAX FRONT WHEEL BEARING REPLACE | SEGWAY NINEBOT G30 MAX ЗАМЕНА ПЕРЕДНИХ ПОДШИПНИКОВ
Как снять переднее колесо на Ninebot KickScooter G30 Max / How to remove the front wheel.
Ninebot Max G30 Scooter - Squeaking, grinding, noise front wheel bearing replacement/upgrade.
Bearings: 6001 RS front
Подшипники: 6001 RS перед
Feel free to support me on patreon! www.patreon.com/user?u=14725906
If you like it, please support by buying the EP at www.northboundsound.bandcamp.com
More music and info also at: northboundsound www.soundcloud.com/northboundsound - Věda a technologie
Thank you I have change my bearing today with your vidéo 👍🏽
Your welcome 🤗
@@RMFUNTIK 🗣️HI . WHEN SHOULD A SCOOTER RIDER , CHANGE THE BEARING ? WHERE DO YOU BUY THE BEARING ? >🎤🛴
@@GABEMOORE533 it depends... usually by sound. local shop.. (or amazon.com)
Great video, well explain good jobs!!!!!!!
thank you for watching!
THANK YOU!
Your welcome
Thank You !
на здоровье
Awesome video thanks!!!
Please and thank you 🤗
Thanks, I just changed mine :)
Glad I could help!
Excellent video, straight and to the point. Thank you!
Thank you.
Thanks
Welcome
Excellent plain instructions. Help me a lot. Thank you so much. Greetings from Istanbul.
your welcome.
I took my front wheel bearings apart to inspect them because the front wheel was noisy. This in my case was the only source of the noise. The front left bearing was dry and dirty from water infiltration. This is your left when standing on the scooter and facing forward. The right side bearing was clean and greased. The right side bearing is protected from the elements from the brake shoe cover. The left side bearing is exposed to the elements, I am quite shocked about this as I do not purposely ride in the rain. I have been caught in the rain a couple of times and have maybe ridden 8 km in light rain. I have cleaned, lubricated and greased the bearings to fix the problem. My G2 only has 723 km on it. My G30 Max had 6,000 km on it and I always rode it in the rain. I had no issues with the G30. It was a tank.
Sale here, front wheel became noisy at high speed, but it's on F2, it's seem they have the same mechanism.
Hola buenas con qué grasa lo hiciste y dosne puedo comprar rodamientos para este patinete gracias
same problem with g2, and not with my old g30
@@drikiwow-8383 I have 3,000 km on my G2 Max. 2,300 km since the regrease and it is still quiet.
Good video
Thanks
Thanks for the great video, why did you use a pin like tool to hit axle when removing it rather than directly hitting on the axle?
your welcome, sometimes.. sometimes i use a rubber mallet
thx
your welcome!
Great video, that'll help me to change it this week.
With these SKF bearing, do you need to put grease inside or it doesn't need it?
well this skf bearings have a lot of grease inside and sealings are good, so you probably will damage the sealing if you open it..
@@RMFUNTIK thanks for the answer. I'm still waiting to receive them so I wasn't sure about that.
@@IIIPowerIII your welcome
Do you know the specs on the spacer they use inside the fork on the non brake side? My second hand one appears not to have one. Hoping to purchase.
Sorry no.. i don't know the specs of the spacer...
My wheel started squeaking steady at 95km in. I have new ones on order for today but should i just re grease the factory ones or take em out and put these supposedy better ones in?
@@Cyber.n-line you could try to grease them
Thanks for this!!! One question, do you have the bearing specs?
in the description
@@RMFUNTIK thank you man!!
@@ediermondragon8037 your welcome
What is the red stuff in the syringe ? Grease ?
What kind ?
lithium grease
Thank you! Just changed mine and the bearing was completely apart and missing some balls
your welcome.
Hallo, was heißt mit TÜV
Darf ich die ansaugung fahren mit einer HJS downpipe und ein FMS Auspuff mit abe
Und passt das bei einem Audi A3 8V 1.8 tfsi front antrieb
Lg
Друг,я видел для левого подшипника подставляют напечатанный на 3д принтере пыльник.Как думаешь,вместе с ним эти накладки боковые встанут обратно?Хотя бы с их доработкой небольшой напильником
незнаю, по мне так лучше поставить хорошие подшипники с защитой от влаги, как эти подшипники что в видео
@@RMFUNTIK под действием постоянной грязи с водой мало какой подшипник долго проживет
SKF живет долго, особенно эти усиленные.. :) проверено
thnks for help, what size is bearings mm ?
6001 RS
Здравствуйте. Скажите у вас уже были в ремонте g30 новых ревизий которые идут с новыми контроллерами и новыми моторами? У которых обе крышки открываются.
Пока нет.
When you were punching out the old bearing, did you have the punch sitting on the inside part or the outside part of the bearing?
when punching out it does not matter... but you can only punch out by the inner ring. When punching in the new bearing ONLY on the outside ring, or you will damage the new bearing
@@RMFUNTIKThank you
@@500wattz your welcome
Hi, video helps. What's the name of the tool in 4:22, Not the hammer. The one that looks like a driver.
Orange? Like chisel, only round, don't know the real name 😁
Hi , i have a bearing 6003 , 2RSH , so do u think its ok for my ninebot g30 max ? Thank u
6001 front.
Que tipo de rodamiento utiliza? 608z?
say what??
I have 30 max. How do i allign the drum break to the fork when installing it back. Can someone send video?
watch the end of the video
What is the first song on the video?
If you like it, please support by buying the EP at www.northboundsound.bandcamp.com
More music and info also at: facebook.com/northboundsound www.soundcloud.com/northboundsound
Does it have to be rs bearing or does 2rs works aswell? 🤔
RS means seal on one side only and that bearing can only be lubricated from the unsealed side; 2RS would be a double sealed bearing which is factory sealed and lubricated and cannot accept any further lubrication.
@@RMFUNTIK Thanks for the excellent video. I cant seem to find SKF 6001 RS. Only 2RS ones. I am guessing from your comment that 2RS is better?
@@sobeythomas6306 yes 2rs is better, thank you for watching!
What is the red substance that you've puted inside the tube where the bearings are?
lithium grease
@@RMFUNTIK
с какой целью мазал красное
масло?
@@rolandasbb не масло а смазка. Для смазки.. для чего его ещё мажут, что за вопрос. 😄
@@RMFUNTIK
подшипник смазaн внутри
@@rolandasbb чтобы подшипник нормально пресануть во внутрь и чтобы воду отталкивало.
Im from peru
One question do you recommend to change the rulments after 2000 kilómetros?
yes
Hi , i have NSK 6001VV bearing , should it be ok ?
RSH OR RS. you need a sealed bearing. VV don't know whats stand for.
@@RMFUNTIK thanks
your welcome
Is skf bearing better than original? After 700km thinking to replace.
They are better than original by 100% 😁👍 not the best ones but surely better.
Hey is the f40 the same? Thanks
nop.. different design .
Какой пробег?
450км
no need to change it , just apply some oil that’s it
if they are rusted, no oil will help. bearings costs like 4 bucks.
I did every step and I still couldn't do it. Not helpful
Well, you then should address this work to a professional.
That's what I was thinkin.