How To Make Air Humidifier | Mist Maker Diffuser

Sdílet
Vložit
  • čas přidán 24. 06. 2021
  • In this video I am showing you how to make a diy Humidifier/diy Mist Maker using Ultrasonic Humidifier Mist Maker Fogger Water Fountain Pond Atomizer Head.
    Required Parts:
    1. PVC Parts (End Cap & Joint)
    2. Plastic Bottle Transparent
    3. 32mm Pipe & PVC bend
    4. 12V Cooling Fan - bit.ly/2TbjXcG
    5. 24V Ultrasonic Humidifier Mist Maker Fogger - bit.ly/3jdwkzG
    6. LM2596 Buck Converter module - bit.ly/3js2A2n
    7. Switch on/off - bit.ly/2U4mrJY
    8. Power connector socket - bit.ly/3qt1Ivv
    DIY Vacuum and Blower - • How to Make a Vacuum C...
    Emergency Work Light - • How to Make a Recharge...
    Subscribe LahisTech: bit.ly/2JHtlyc
    Subscribe for more future creative project videos.
    Thank you.
  • Jak na to + styl

Komentáře • 84

  • @joshuachurch5468
    @joshuachurch5468 Před 2 lety +17

    *humiditer We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*

  • @NelsonWillis-kt8ck
    @NelsonWillis-kt8ck Před 9 měsíci +18

    My original intention for this humidifier was to use it for plants that require high moisture levels. After using it in my room, czcams.com/users/postUgkxtD9aJ2m6GU-X1IChQxjn9l31K1A7Kpwj however, I think that's where it is going to stay in the fall and winter season at least. The increased humidity in my room made the room warmer and more comfortable. I had first ran the humidifier for 4 hours with the timer setting for it. After the first hour, I checked my room and can feel the difference. When the full 4 hours was up, I checked again and noticed that the humidifier was shut off as it is suppose to. The moisture level never seem to get passed 56/57%. I then let it run until all the water is used up, which it wasn't all used up. There are still some left in the base that you are not suppose to add water to. I filled up the water tank all the way again, being careful when removing it from the base. Some left over water may spill out. After putting it back on and setting the unit to auto, I let it operate. It didn't stop running, rather I don't know if it did at any point since I didn't check it regularly, for 24 hours after which the water in the tank ran out. The moisture reading never passed 56/57%, which may be a good thing for me. Being situated right next to my bed, the noise was not very noticeable with the occasional water gurgle from time to time as the unit ran.

  • @ayahsadam9817
    @ayahsadam9817 Před měsícem

    Nice sharing my support👍

  • @stonerman15
    @stonerman15 Před 2 lety

    Beautiful mist

  • @roben999
    @roben999 Před rokem

    Wow Thats A Lot Of Mist👏😲

  • @mangeshkale5402
    @mangeshkale5402 Před 2 lety +3

    Great finishing and nice job

  • @waldosoto4353
    @waldosoto4353 Před rokem +1

    hola, cual es la temperatura del agua al salir?

  • @quemeese
    @quemeese Před 2 lety +1

    what is the voltage from the AC adaptor to the humidifier circuit? how long does this unit produce mist? does it necessarily have to be kept stable or can you move around with it?

    • @TuserMotovlog
      @TuserMotovlog Před rokem

      Adaptor DC 24v

    • @ijazkassim6496
      @ijazkassim6496 Před 10 měsíci

      question a : 24 volts dc
      question b : it produces mist using water so it will work forever as long as there is water inside cup
      question c : u can move around but it should be connected to the current input (the adapter plugged)

  • @ashenafimesele7443
    @ashenafimesele7443 Před rokem

    really amazing

  • @freefirekafan3505
    @freefirekafan3505 Před rokem

    Amazing bro 😎😎

  • @nihiljo
    @nihiljo Před rokem +3

    great job you did there mate. But you please drop the schematic for the project, thanks

  • @sandasmr00
    @sandasmr00 Před rokem

    Keep going brother 💕

  • @wendell2412
    @wendell2412 Před 2 lety

    It's ok to put a liquid and water to this diy humidifier ?

  • @daycreative7597
    @daycreative7597 Před 2 lety

    👍👍👍keren 👍👍

  • @vdsmade
    @vdsmade Před rokem

    Good job 😎👍

  • @ocramenet7236
    @ocramenet7236 Před rokem

    Hola, como lo puedo buscar al kit q pones en donde y con q nombre porfavor

  • @kitkido1241
    @kitkido1241 Před 2 lety +1

    Hi bro, can tell dimension size of the fan?

  • @alexjones2467
    @alexjones2467 Před 2 lety +1

    Nice bro, can u make it wireless

  • @electronic7979
    @electronic7979 Před 2 lety +1

    Nice

  • @verhor3592
    @verhor3592 Před 2 lety

    csn u tell me fooging out is cold or hot?

  • @sershetech5584
    @sershetech5584 Před 2 lety

    Watching 👍

  • @154198465
    @154198465 Před rokem +3

    How much did it cost for the entire project

  • @mr.kamalcreative
    @mr.kamalcreative Před 2 lety +1

    Excellent job 👌👍

  • @wajahpribumipribumi6578

    Itu bahan2 abis berapa rupiah .murah ga -itu buat ngangkat ic cpu atau konektor cas bisa ga-cepet copot ga ic ya

  • @assoartisticworld
    @assoartisticworld Před rokem

    Nice ;)

  • @spidyweb1050
    @spidyweb1050 Před 2 lety

    last song in the video .whats the name? at 15:22 please anyone can tell

  • @stevenadams4429
    @stevenadams4429 Před 2 lety +2

    Should of made Nossle output part from like vacuum duct tubing for directional pointing, so you can make fog come out whatever direction you desire.

  • @knives456
    @knives456 Před 2 lety

    Is it posible to order?🙂

  • @andidevgann7014
    @andidevgann7014 Před 2 lety

    Pakai Fan Ukuran Berapa X Berapa gann?

  • @vanshkashyap9103
    @vanshkashyap9103 Před 2 lety +4

    Can we fill sanitizer instead of water..?

  • @surmur
    @surmur Před 2 lety

    And you need a filter/or thing that turns tab-water lime so that it does not form crystals when water is left on surfaces or when it goes to lungs. Tab water is the worst you want to breath in. Those should have a some kind of sign of that you should use appropriate water with those which is e.g DI or distilled water. You can buy a DI cartridge and put it at the final stage of standard household Reverse osmosis water purification system. I got mine working and I am exited to build ultrasonic water humidifier... Now at south Finland we have had 20RH fort the last 2-3 weeks.

    • @moonjunn8567
      @moonjunn8567 Před rokem

      where should i place the DI cartridge

    • @surmur
      @surmur Před rokem

      ​@@moonjunn8567 Ideally at the end of household RO- system, but alone at the end of tap should work too. You will get rid of minerals but other stuff like bacteria goes through. Minerals are worst I think. Bacteria can be stopped with carbon filter(usually a part of RO system). Tap water thrives the water through RO filters and DI filter but If tap has too low pressure RO pump can also be used. Many RO systems come with intrusive connection mechanism that pierces your small copper/metal water pipes and takes tap water that way. So then you will not need plumber-man. I made a portable RO-DI system with pump because I didn't have guts to use that piercing joint valve.

    • @JLaurel
      @JLaurel Před rokem

      distilled water doesn't work. the sensor for water level don't trigger on distilled water unfortunately.

    • @surmur
      @surmur Před rokem

      @@JLaurel That's odd

    • @JLaurel
      @JLaurel Před rokem

      @@surmur I had one and used with tap-water without any problem, left it in another country when i moved... now I order another one and spotted this claim in many comments on amazon, it make sense because pure (distilled) water do not conduct electricity. The water level sensor will have difficulty to sense the water.

  • @rezoc.
    @rezoc. Před 2 lety

    What will happen if water drains completely... Will stop by itself?

    • @ijazkassim6496
      @ijazkassim6496 Před 10 měsíci

      the disk or ultrasonic humidifier will vibrate so hard that water splashed into tiny particles those particles are so small that mist is produced, if the water is drained the disk will vibrate but no mist will be generated

  • @erwinchin8401
    @erwinchin8401 Před 2 lety

    Mantap bro.... Bisa di Oder gak?

  • @Majholm1
    @Majholm1 Před rokem

    Can I buy this from you?

  • @rawrraass
    @rawrraass Před 6 měsíci

    Hii can i ask what diameter did u use for the plastic bottle? Thank youu

    • @rawrraass
      @rawrraass Před 6 měsíci

      And what are the cables that u used? I really need this for a project🙂

  • @stonerman15
    @stonerman15 Před 2 lety +1

    Make a way bigger tank. Like a plastic tote/container

  • @muhammadrahmad539
    @muhammadrahmad539 Před rokem

    Link pembelian ?

  • @cuf_
    @cuf_ Před 2 lety +1

    Can u put some smelly stuff to make a house smell good?

  • @AbidKhan-ft4nx
    @AbidKhan-ft4nx Před 2 lety

    یہ ہم کو کتنے رقم میں مل جاے گا بھای پشاور میں کنٹک نمر

  • @tiagochristian1ctiagosemh414

    1 liek hehe

  • @SestaCorporations
    @SestaCorporations Před 11 měsíci

    This is elon musk 🔥

  • @anangrofi4131
    @anangrofi4131 Před 2 lety

    Apa alat itu di jual

  • @nadisch985
    @nadisch985 Před rokem

    Can you vape it

  • @agusbudiiskandar294
    @agusbudiiskandar294 Před rokem

    I WANT that

  • @annonymat
    @annonymat Před 9 měsíci

    est Design I've seen so far

  • @sanjaynsaigal
    @sanjaynsaigal Před 2 lety

    Pl name Supplier of ultrasonic crystal and drivers

  • @CauOngTroi
    @CauOngTroi Před rokem

    diy pefert.....🎉🎉🎉🎉

  • @mounty8807
    @mounty8807 Před 2 lety +2

    Bad Idea, Sir!! It dosen't allow for (Water) height adjustment, as needed, or else when water is emptly, or too high, it will not work. Best would be to put it on a swimmer of types...

    • @daphneraven6745
      @daphneraven6745 Před 2 lety

      Mounty: Watch the video through to the end. It works just fine.

  • @abidin_dq2832
    @abidin_dq2832 Před rokem

    To sale Indonesia??

  • @mattyburrows9059
    @mattyburrows9059 Před 2 lety +19

    but you need to fill it up every hour lol

    • @daphneraven6745
      @daphneraven6745 Před 2 lety +5

      matty burrows: That’s The thing about a tutorial: it’s just a guide. You can decide for yourself what size reservoir to use. It doesn’t have to be a small one. The principles will still be the same whether you use the same size or a different size reservoir. This guy made the size That will work for him, and you could choose a different size for yourself when you make your own.

    • @mattyburrows9059
      @mattyburrows9059 Před 2 lety

      @@daphneraven6745 or buy a ram humidifier for £30

    • @liaartyplay_yt5883
      @liaartyplay_yt5883 Před 2 lety

      @@daphneraven6745 Nice opinion, one small issue, im inside your home

    • @kathvi
      @kathvi Před rokem

      @@mattyburrows9059 I'm doing it for school purposes I use this vid tutorial

  • @philipmurray4065
    @philipmurray4065 Před 3 měsíci

    Why do you think this stops running after a few seconds? At the end of the video it stops running. I mean the main ultrasonic humidifier itself. I tried it in different bowl in different water levels but it does the same thing before even starting this project. czcams.com/users/shortsQTjyeZ2T7wk?si=tniPSMeNrakg9NYh

  • @Zeddify
    @Zeddify Před 5 měsíci

    use quiet fan. It is too noisy, you need to use blower, because it is quieter

  • @cap7nakshan147
    @cap7nakshan147 Před rokem +1

    make a humidefier by buying a humidefier 10/10

  • @UBsLab
    @UBsLab Před 2 lety

    Paint job could be improved

  • @gilbyska6126
    @gilbyska6126 Před 2 lety

    omg i hate minute 1:58 my ears :'D

  • @designerpotplanter7555
    @designerpotplanter7555 Před rokem +1

    इतनी ही फॉर्म फेकने वाला 4 पेंसिल सेल से चलने वाला रिचार्जेबल बैटरी और रिचार्ज करने वाले माड्यूल के साथ बन सकता है

  • @nerminsalkic6360
    @nerminsalkic6360 Před 2 lety

    Sale me

  • @savagecommenter9243
    @savagecommenter9243 Před rokem

    4th grader trying to make a vape

  • @crmamsila
    @crmamsila Před 2 lety

    Nice