Redcat Lowriders Full Metal Driveshaft Upgrades for the LRH285 Chassis Sisty-Four and Fifty-Nine

Skunks Hobbies
www.skunkshobbies.com/
Skunks Driveshaft
www.skunkshobbies.com/product...
Rose Gold Metal Machined Universal Joint Drive Shaft 60-77mm
www.aliexpress.com/item/10050...
Silver with Red hubs 63-73mm
www.aliexpress.com/item/10050...

[@Skunkdog]

Once again another great Video appreciate your great content and support "Skunks Kustoms-Skunk Hobbies"

[@Carlosinator]

Excellent Video. Thank You! I didn't know there were so many metal or aluminium driveshaft options available for the LRH285 Chassis. I'm still at the Flip Chris stage in my Impala Build. Going to take a little more work for that option in an aluminium shaft but the looks will be worth it. Thanks for all your research and content Brother!
👊🏻😎

[@NorthSideCustomRC]

you moving along nicely, Im a do the Flip Chris Mod on a metal driveshaft in upcoming video

[@Carlosinator]

@@NorthSideCustomRC Awesome. I'm gonna stock up on Dremel Bits.
👊🏻😎

[@icecold1307]

I recommend pulling the e clips off r1st thing and squeezing them closed a bit and putting them back

[@NorthSideCustomRC]

eh, Thanks for the good idea, that lil bit of extra security

[@jesusedenhernandezdeanda698]

La neta me encanta este tipo de videos pero no entendí nada de lo que explicaba 😅😢

[@djlilshonn]

Awesome videos brutha. I just had a question on what kind of ball ends are the red ones you're using? And what sizes are they? M3 I'm assuming. lol. Thanks for all the help

[@80377.]

Hello, What was the length of the drive shaft in the video cause when I click the link for skunk hobbies it ask for a length

[@jasondraughn7850]

Hi, where do I find red anodized rod ends? Thanks

[@RadRaf]

Thanks for the vid. Just curious, is it worth losing that mod where your driveshaft "disconnects" at full lock in order to hop better?

[@NorthSideCustomRC]

The driveshaft mod makes hop much better, one of easiest ways to get more hop aside from turning up the voltage to 8.4
I get by without it cuz I accept the hop hurt just as long as I tap bumper I'm good but I'd swap in flip mod driveshaft for any type of comp

[@NorthSideCustomRC]

Should have Single Pump hop set up using Jevries build plan up soon

[@G-J-92]

Does this significantly reduce the noise at full lift that the original shaft would make when accelerating?

[@NorthSideCustomRC]

Yes it helps but Honbywing 1080 really helps with added low speed control

[@joshimhof6426]

Is the chassis for '59 and '64 the same?

[@randynozaki3563]

did you upgrade the links?