Somebody finally made PID tuning make sense | Chris Rosser PID tune method | Part 1
Vložit
- čas přidán 18. 06. 2024
- Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
Somebody finally made PID tuning understandable for everyone. It's Chris Rosser! He's released two videos (so far) about filter and PID tuning, and they finally break down quadcopter PID tuning into a set of steps that nearly anybody can follow to get a great flying quad. I'm going to work through the steps and see what kind of results I get!
Chris Rosser's Filter Tuning video: • Betaflight 4.2 filter ...
Chris Rosser's PID Tuning video: • Betaflight 4.2 PID tun...
All videos in this series are in this playlist: • Chris Rosser PID Tunin...
Build the exact quad I'm flying! My complete tutorial: • JB's Perfect Freestyle...
-- TABLE OF CONTENTS --
0:00 - Introduction
2:12 - Sample flight with final PID tune
3:22 - Make sure your quad is mechanically sound
6:04 - Test flight to set up filters
7:19 - Blackbox analysis of first test flight
Download Blackbox log viewer at: github.com/betaflight/blackbo...
How to download and install the UAV Tech BB Viewer workspaces: theuavtech.com/blackbox/
8:29 - Recommended filter settings based on first test flight
9:20 - Discussion: Find your Max D Gain
11:06 - Set pidsum_limit and pidsum_limit_yaw
11:50 - Test flight with Master Multiplier at 1.5
13:47 - Test flight with Master Multiplier at 1.4
Just built my dream quad. It’s bright blue skies and Bardwell releases a tuning video right when I need it.... too many things are going right today so my drone will definitely explode.
ahahahhahaha bro
Hahaha , I feel this.
Exactly. Bro... Lol... go balls to the wall today.🥳🥳 You may never get another chance... YaHOOOOOOOOOOO
Did it explode yet
@@nolacross704 nah found a session 5 in perfect condition later that day on Facebook marketplace for $150. Flew 30 packs on a new drone with a new cam. Damn good day. May the Gods of sbang bless you all as well.
Nice Stick Overlay! :D
Awesome to see Chris’s work done by you! Thanks for this! Literally could listen to you and Chris all day!
This is so good, things are getting so much easier for people tuning their quad. Big Thanks to Chris and you Josh, this is gonna help a lot of pilots flying a good quad!
It's been great to see the "banter" #short video's recently between you guys!
But can clearly see how much respect you guys hold for eachother!
Thankyou both for your Fantastic videos!
I learn something EVERY DAY from you!
Thanks for sharing the knowledge.
Good to see Mark and Chris communicating.
Both offer top level information and advice.
Regards to both and to YOU JB.
Tried it and the quads are flying amazing. Rosser is the man!
I'm watching Chris his videos for a few months now, and even though I don't fully understand everything he says, it really helps me to get a grip on what I am actually doing with pids, filters, etc.
Thank you for doing a companion series to Rosser's simple tune vids. Can't wait for the remaining videos in your series to post. I think the other folk(s) that make these tuning help videos are prone to talking over the heads of us non engineer types.
The coolest thing about Bardwell doing this video is that Chris is going to Blow UP in this hobby! Thanks for yet again sharing the love to others in the hobby. You have always been great about giving props to people with talent, as well as helping to build up those who deserve it
Joshua, you are the reason I'm still flying after 4 years man! I'm sure without all of you priceless info I would have long since gave up, somewhere along the way. You're a big part of this killer sport/hobby and are in the fpv history archives, for sure. So, thank you for your invaluable contribution dude!
Long live the info king of fpv, the know it all, the guru, Mr. JB!!!
Chris is the man, his blackbox analysis is amazing. He is going to take this hobby to the next level!
The biggest help for me in learning what the P, I and D do is a video called "PID demo". A guy (Horizon 4 Electronics) made a box with a pointer that moves left and right. It had knobs for P, I and D on it and when he adjusts the knobs you can see what each one does and how it effects the pointer.
Thanks a million. This really helped me dial in my Banggod 5 inch.
Also, your alarm going off while you fly and try to talk over it was pretty hilarious.
Yes, much like you are numero uno for all things quadcopter, Chris is a fantastic resource for learning some great information and techniques 🙂
I followed his tutorials to tune my newest Betaflight build and my quad is flying amazingly well.
The stock settings in Betaflight just didn't work well at all for me, I was having those low throttle wobbles and instability after flips and rolls on stock, but after following his tutorials the quad flies amazing now.
The filter settings are unbeleavable good on my toothpick with RPM filtering. Thank You!!!
I don't know what I would do without you JB
thanks man
I definitely learned something today I see PID tuning in a new light I like tuning my quads by feel and sound as well this is awesome
Gettin' into the guts of our quads... it's a lot of fun, and I personally am enjoying the process. Great vid!
Yup Rosser is the man! His video helped me get an annoying noise out of my tune.
Fantastic, Joshua! Thanks a lot for all the tips! 😃
Stay safe there with your family! 🖖😊
I put the same filter tune on my 110g 3 inch and heavy 3.5 inch.
Both of them fly amazing. I was trying all sorts of pid changes before and was a bit stumped... Now stock is nearly perfect for both.
Kudos for giving kudos 👍🏻. Very good video.
dude..your flying is awesome
Great Job Mr. Bardwell! Great Job 👍
Great video. Thanks for the tips!
You sounded like morty at the end. Oh man jeez that quad flies good now ehh Rick!! Lol. Love the vids man!
Wow, it is awesome how much better you fly Joshua, just in a couple of years. Three packs a day. I need a bigger yard!
I find this hard to believe but OK…let’s learn something today!
Awesome video. Thx for sharing this criss Rosser magic. Apart from that.. Damn Joshua. You became an incredible pilot. Back in the days I always watched your videos for the latest information and stuff but damn.. Now its even more enjoyable since you are absolutely killing it at your home spot. Much respect
great effort~ finally done!
That was very nice flying.
Hey Josh, what an improvement in a few years of practice! Excellent close proximity.
Yes I noticed that too. Big progress!
Good point. You know, after one gets to a certain level of ability, one realizes that 'proximity' skill is really what defines accomplished, smooth, all around captivating flight.
I took my AOS5 v1 apart down to the frame, to begin a tune for the start of next season. Turns out I have been flying with a broken arm all summer. If it was not an 'A-arm' style build, it would have not been in the air at all. I'm glad I took the time to go through the first step. Even though, it probably could have gone on flying with no flight-ending failures, Chris's design kept it from failing, but with that fracture, I would have been chasing my tail trying to find what the resonance was coming from.
Now. New arm. New Season. New Tune.
Three months till spring here, can't wait for the new year! (yes, new year starts on May 1st, lol)
I love the drone but love the house. The view and space perfect.
OMG I got a GetFPV ad right before this video and you're in it!
OMG Josh, that flight was so exciting
Awesome video Josh 🙏🙏🙏🙏❤❤❤❤
This is the best stick overlay I've ever seen
Goddammmmm that's crazy lol. Great flying!
i have his aos 5 v2 frame and i love it. would definitely recommend it
I love your content!!!
hey Josh I just bought an ix20SE so I can fly mode 3 and I am going to love it.
That tune got you flying like a beast J.B
Amazing flight! a good tune is good but your skill can properly demonstrate it.
Thanks!
I haven't seen you fly in a while Josh, obviously you have too much time cause you are rippin bro!!!
took my pid sliders basically to the moon and im very happy..need a good frame though..source1 is noise proof
Chris Rossers tunings tuts are awesome, very systematic and easy to understand and follow.
Damn JB you flyin better and better!
Damn jb you are getting good. 👌
I don't know if anyone has told you this, but I feel like your flying has really had a breakthrough lately. You've always been a good pilot in my eyes, but some of the moves in the first part of that video I've never seen you lace together. Great flying brother!
Three packs a day... it does work
I usually fly defaults..this is making me want do dive I to tuning since openpilot 👌
Let's go Josh!!!! Sheeeesh!!!!
Thank you for all you do for the hobby. It's just such a shame that anyone getting into the hobby, can't because of the absolute evaporation of inventory available to buy. It's like a steakhouse with no steak.
THIS is what I felt I was missing when I wrote that comment on Chris’ channel Joshua! Dang I hope you read this, good work!
Glad you like the content.
I love this shit boyyy! Can't wait to get my quad flying Smoove too.
If I tap like twice, it goes away. If I tap it a lot of times, will it count the total? Good stuff, appreciate you being there for us. Your skills are rocking now, bub.
Josh you have gotten way better at flying ever since your 3packs a day series. Just saying.🙌🔥👏
I'm very interested in trying what you're doing here on my build that you connected to your laptop at Rampage. It was the 5-inch player one with a iFlight H7 beast toothpick board which is 55 amp mine would really be pushing the limits though because I'm using it with 2206.5 2550 KV Tmotors on 4S. I've been flying it lately doing speed runs and it's working great with stock beta flight setup but I like pushing limits so let's see how it works... Looking forward to part two and possibly three 🗣️💯
Also if you haven't already a link to those stick overlays would be awesome
This comment is not meant to sound like I'm bashing BetaFlight or Emu but the combination of FETtec FC/ KISS FC coupled with a FETtec ESC gave me results like this out of the box with very, very little change 🤷
Again, not bashing it and not everyone can justify KISS/ FETtec but it is bloody good.
The tune on this quad at the beginning looks mad though JB! Nice flying
Thank you for the practical walk-through, Joshua! Would you please let us know the gyro & D-term latencies estimated by Mark's XLS for your final filter settings?
Holy shit, I learned how to fly on Chris' plot, in the simulator Liftoff. Didn't even know this was a real place. I was really proud when I managed to get into the shed for the first time!
This is Bardwell's house lmao. Liftoff literally has his name in the title lol
Criss Rosser and JB FTW! FPV excellence.
Your flying has improved so much! Guess I need to start flying 3 packs per day to git gud ;P
I really like the new stick overlays. Mind sharing how you did it?
Josh you have sold yourself short , you to are a professional.
Nice! Rippin' hard these days!
There's tuning for performance and then there's tuning for longevity. Reliability can be built into either side of the spectrum but if you play chicken with the edge of performance envelope, it begins to become unreliable.
Tuning for performance shortens lifespans of components - make sure you can sustain the cash flow for that tuning. Ask any car tuners.
I think Betaflight presets lean towards longevity and reliability - easier on the wallet and increases flight time over bench time.
Looking forward to the rest of the series!
i dont know who chris is, but im tryin to get with the times, cut me some slack! lol my first quad is still in the mail, should be here tomorrow. i have to rewatch your landing video from years ago and get some more practice in on the sim with that before my first flight though
hey brother thanks for takeing the time to help me out yesterday for my BIRTHDAY ..josh i just will never know how u do all that you do ..Thank you so much for making this hobby accessible ,with out you i could of never done this hobby..Once again the video was awesome thanks again.... SANDYDOG_FPV
hfs. I mean, I knew you were getting better at free style but this looks really good.
first off we love Joshuas videos and follow every word.So I heard you say tune on old props,my problem with that is if the props are worn or weighted differently from being worn or even knicked .It will make every prop different and screw up your tune.I get your reasoning but I believe you should start from perfection (as close as you can)as the props get old you will feel problems and know better when to replace.We would still be stuck on camera drones if it wasn't for Joshua.As it is we have about 20 succesful builds and many more prebuilts and we couldn't have done it without your help.My common sense says you might be wrong on this and since so many of us follow your every word please prove me wrong,lol Thank-you
I still have cool motors with D up in the 60s and P in the 80's, getting scary :)
Clean build!
Clean build on a good frame. Enjoi!
Yeah I was at 100 on p and 55 on d, but gunk I will just start over and reduce filters
@@ugpfpv361 I found P at about 75 and D at 45 is my sweet spot. with 150 FF. I reduced all filters apart from the D lowpass @ 100hz. cool motors after 5 packs
Hey brother, I just built a xl10 v5. It’s flying pretty good so far but I can’t figure out why it has low throttle shakes. When I get down low say to land it’ll shake a little. Thanks Joey! I enjoy the videos
How about switching to a different kind of props? How much do different props affect the tuning?
would certain motors or a type of esc not like RPM filtering ? also when do you use RPM filtering also do you have an updated video on RPM filter setup 4,4 betaflight settings have changed since your last video thank you God Bless
#YODA .......... Thanks for all your info over the years Joshua....... kept me in the game for sure!
great video
the day that the usb connector goes away and a more robust connection during the tuning process would be sweet. sure mostly my ham fingers, but haven't broken a usb conn on my phones; usually the cord wears out first...just beeching
for the Dynamic Notch Filter Tab, I don't have a Dynamic Notch Max Hz but instead I have Dynamic Notch Filter Range it can only be set at AUTO, LOW, MED, & HIGH
Question. I have the seagull drone by eachine if I crashed and had to replace one of the motors which motor would I replace it with. I have searched the internet and can not find the original. The closest is geprc 2004 2550kv or beta fpv 2004 3000kv. This would mean replacing all four if one was broken. Please advise on your recommendation. Enjoy your you tube videos very helpful. Keep up the good content.
What is the hitch Joshua is talking about sometimes? The motor noise on throttle punches? very small changes in stick control?
Hi Joshua,
Does this kind of tuning only work for the fast 5 inch drones, or also for the ChineWhoops, for example.
Dam your tune & flight was so fast & smooth it looked like the playback speed was sped up 1.5x! Oh and Is that a Lynchpin T-shirt?
When you talk about hitches or blips what do you mean?
I haven't heard anyone mention the fact that you can change PID profiles via the OSD. Is there a reason you wouldn't want to have one "aggressive" profile when your quad's in good shape and then a second profile that you switch to when you crash and need to fly back home? I'm guessing that's because some of the filter settings are independent of your PID profile?
The gyro filter I think is outside the PID profile. Realistically the reason I that most people don't want to think about switching they just want to fly.
You were so nearly in the tree at 2:30… you had no idea where it was and then styled out of it into a power loop! 😂 (I only know this because I do that kind of thing all the time)
I had a vague sense that I might be going into that tree. Freestyle is all about "happy little accidents".
@@JoshuaBardwell yeah I totally agree. There’s blind moves and then completely blind moves where you really don’t know where you’re going, just that something is there and you need to get away! Keep doing what you’re doing anyway, Joshua. I’ve been doing fpv for almost as long as you have and you’re one of the view channels that I still follow.
i hate u.
😂 This is why I wait to watch. So I do not have to wait for the next part. One time I jump the gun, gotta sit on my hands. Being in the middle of repairs and builds, I have plenty to do. My gopro is temporarily out of commission, though, so I can't film anything. i hate u. 😂 Cheers JB!
Hi Joshua . Im building a new drone & im a beginner do i have to do this PID tune ?or the Flight Controller already have a preset ? Thank You
I followed these steps on a GEPRC mark 4 prebuilt(They somehow give me a prebuilt quad with no factory tune). But then I keep frying the left front motor when i was tuning D term, the other three are just fine and cool. I sent it back to their shop for repair all they did was to replace the motor and put tune in, then the quad was flying fine. I recently find a lot of prop wash on it so I kind wanna follow these steps and retune it again, i find out they have crazy amount of filter in their factory tune and pit loop time of only 1.6khz. So I raised the loop fz to 3.2(they have slower gyro on this one),and reduced to the filter setting by the recommendation of this video. Immediately I fired the left front motor again with a 360 row, I really couldn't figure out why It seems to act nomarl but keep frying the left front motor the moment i try a flip.
what is the controller? is it better than the one from DJI? I want to get into FPV, haven't decided what I need yet
Need to compare Chris' approach with UAV Tech's approach. I've just tuned an Apex with UAV techs, it flies really nice, I bumped up the master slider one notch and I like the feel of the increased I gain, but took it back down because he says to leave it at default. I will try tuning it again with Chris' approach on a new profile and compare them, but a video from you doing the same would be great too.
I'd be interested in your comparison too man 👍
What was the drone and build in this video? That thing is rippin.
When chasing D gain you'll find one level is hot and another is safe. Turn on D-min and set the safe number to the low and the hot number to max.
those filter settings are also good for 4.4? thanks :)
Hi, there. my MOTOR 1 is spinning as normal but with Errors. The more throttle I push, the bigger Error code appears. It is a fresh build, can it be a hardware issue?
When JB's test pack looks like my dream pack... 🤦♂️
I have no gyro scaled in black box??? My Debug Mode tab is just empty, and even when I try to edit/add gyro scaled fields, they dont populate on the list to choose from??
was it cooler when you dialled down to 1.4 multiplier?
Does anyone know of a pid controller that will vary the voltage output rather than just cycle on and off. Thanks