TRANSMISSION SERVICE- FLUID, FILTER & GASKET | 2011 NISSAN ROGUE | Howto/Diy

Sdílet
Vložit
  • čas přidán 6. 09. 2024

Komentáře • 47

  • @ThePullUpKing
    @ThePullUpKing  Před 19 dny

    Whoever says i didnt show the type of fluid i used... yall clearly not watching the video. 0:39 in the video, I show it. And tell you to make sure you get the right type. Do diligence ppl.

  • @Lashante727
    @Lashante727 Před 8 měsíci +1

    Thankyou so much!! I needed help doing this but didn't know where it was lol!

    • @ThePullUpKing
      @ThePullUpKing  Před 8 měsíci +1

      Nice!😎 Thank you and I appreciate you watching!

  • @roberts1159
    @roberts1159 Před 8 měsíci +2

    Straightforward video. This car also has an external cartridge filter. Do you ever change that also ?

  • @donaldpoole1584
    @donaldpoole1584 Před rokem +1

    Thank you!
    Ive heard many people recommend to change the Trans Fluid in this car every 30k-50k miles.
    How often does Trans Filter / Gasket need to be replaced?

  • @mccg4337
    @mccg4337 Před 7 měsíci

    basically its a screen to catch metal particles.. its not actually a filter to like clean the oil.

  • @Pingaheimer
    @Pingaheimer Před 26 dny

    When it's hot, the dipstick should read around the middle to upper section of the crosshatch section?

  • @mavatj
    @mavatj Před 8 měsíci +1

    Great video

  • @factzmediaglobal
    @factzmediaglobal Před 8 měsíci

    IF POSSIBLE YOU CAN REUSE THE FACTORY GASKET IT WORKS VERY GOOD ... I THREW THE DURALAST GASKET AWAY . IJS TIP

  • @davidshek606
    @davidshek606 Před 5 měsíci

    Thanks for the video, sir. Did you use RTV or a gasket maker to secure the gasket to the pan?

    • @ThePullUpKing
      @ThePullUpKing  Před 5 měsíci

      No problem. I explained that in the video.

  • @davidshek606
    @davidshek606 Před 10 měsíci +1

    But you didn't change the filter, you just changed the screen.

  • @Billy-wk3vv
    @Billy-wk3vv Před 9 měsíci +1

    thanks

  • @RespectMusicTV
    @RespectMusicTV Před 10 měsíci +1

    🔥🔥

  • @jasmyneashley5186
    @jasmyneashley5186 Před 10 měsíci

    I have a Nissan rogue 2008 do I have to flush it on or it’s the same as your

    • @ThePullUpKing
      @ThePullUpKing  Před 10 měsíci +1

      Don't flush it. Just drain, fill and replace filter.

  • @shellybelle6781
    @shellybelle6781 Před 7 měsíci

    Where is the cooler oil filter located ?

  • @Kneedeepinstock
    @Kneedeepinstock Před 11 měsíci +1

    Did it fix the Torque Converter Code?

  • @walterjackson7757
    @walterjackson7757 Před 4 měsíci

    What kind of fluid do I use to replace?

  • @mariovalladares9055
    @mariovalladares9055 Před 8 měsíci

    And if you replace filter can that make the rpm not go higher

    • @ThePullUpKing
      @ThePullUpKing  Před 8 měsíci

      Not at all

    • @mariovalladares9055
      @mariovalladares9055 Před 8 měsíci

      @@ThePullUpKing trans when acceleration the rpm goes fast and then goes down funny

    • @ThePullUpKing
      @ThePullUpKing  Před 8 měsíci

      @mariovalladares9055 Cvt transmissions are known to go bad. I would start by scanning for any trouble codes.

    • @mariovalladares9055
      @mariovalladares9055 Před 8 měsíci

      @@ThePullUpKing no codes

    • @ThePullUpKing
      @ThePullUpKing  Před 8 měsíci

      @@mariovalladares9055 You won't find transmission codes with a regular obd scanner.

  • @ahamilton3521
    @ahamilton3521 Před 2 měsíci

    What about the second filter bub? Just fuck that one?😂

    • @ThePullUpKing
      @ThePullUpKing  Před 2 měsíci

      Yup and got the job done bub. Thanks for watching anyway

  • @sergiocabrera9126
    @sergiocabrera9126 Před 19 dny

    Bad work, not change the paper oil filter the back transmision, and not tell the fluid use it