Learn the simple steps of starting and operating a gas fireplace, including start up, flame and heat output and fan adjustment. For more information visit bit.ly/1OhHPx7
Thank you for doing this video. it's so important for safety reasons. Question: Will you elaborate on turning on and off the fireplace with the gas key and remote--how to do this safely.
Do a video on how to connect the smart stat II III IV vs the HHT wall controls detailed install please because with then HHT you dint have the 3 volt to the iginition. It’s impossible to get heat and glo support wonder why dura blow products have started to take over
Why can it take up to a few minutes for the fireplace to start after turning the wall switch on? If the pilot is on, shouldn't the fireplace always start right away when the wall switch is turned on? Please clarify....Thanks.
Pilot lights when thermostat kicks in but flame does not. After a short time pilot turns off. I have cleaned the holes on the grill and it worked once but I am now back to the issue stated above. What could be causing the flame not to catch when pilot light is engaged?
My heatnglo insert pilot light and fan comes on but the main flame does not come on. How to fix this? I believe this is a Cosmo model about 5 years old.
I have a question for you if you possible to reply my question . I owned heat n glow 4000gdv having some issue . I got it on and running but it will shut off it self after it run for 20min . Do you what does cause this issue
My hi/lo adjust knob stuck on lo, in 2005 . New and replaced that unit with the knob, has 4 bolts, but flame is still low even turning to hi. So does the pressure need to be increased or just a new gas valve needed?
Is there a high temp safety feature that turns off fireplace at a certain temp? My pilot light remains on and I turn my fireplace on by flipping a switch, fire turns on but about 25 minutes later it goes out but pilot light remains on. What is going on?
hi my remote doesn't show the PILOT IKON i have restarted using the paperclip on the control panel but it seems the pilot won't light.. it times out. it has been working until yesterday..
Buyer Beware Heat & Glo, you have to use their controller, can't integrate into your Thermostat that controls the rest of your house, And it won't work with any wifi or iphone or other phone apps.
Heat & Glow has a beautiful fireplace with technology that is garbage, unreliable, 10 to 20 years old. An old fashion touchscreen monitor on the remote that shut off after seven seconds. And Wi-Fi module that loses connection doesn’t work nearly 80% of the time. The phone app is limited in buggy. Even when it’s working, there is no setback to turn the fireplace to a lower temperature at night as if that’s a new idea?
Thank you for doing this video. it's so important for safety reasons. Question: Will you elaborate on turning on and off the fireplace with the gas key and remote--how to do this safely.
I saw a gorgeous one at Starbucks!
I need one in my life 🥰❤️🔥
Do you have to remove the decorative glass when using or is the glass suppose to stay on, I didn't want the glass to get too hot and shatter
Do a video on how to connect the smart stat II III IV vs the HHT wall controls detailed install please because with then HHT you dint have the 3 volt to the iginition.
It’s impossible to get heat and glo support wonder why dura blow products have started to take over
34 seconds of intro in a 3:18 video. Someone really loves the sound of his voice.
Why can it take up to a few minutes for the fireplace to start after turning the wall switch on? If the pilot is on, shouldn't the fireplace always start right away when the wall switch is turned on? Please clarify....Thanks.
that’s what I wondered. I thought the house was just filling up with gas the whole time before the flames kicked on😅
Short video, but very informative.. thanks guys
Do you need to use the wall switch and the remote or does the wall switch stay off if you want to use the remote only?
Pilot lights when thermostat kicks in but flame does not. After a short time pilot turns off. I have cleaned the holes on the grill and it worked once but I am now back to the issue stated above. What could be causing the flame not to catch when pilot light is engaged?
Our installer left us with 3 wall switches and no instrucions. We can't turn on your fireplace. Do you know what scenario 3 switches would be used?
My heatnglo insert pilot light and fan comes on but the main flame does not come on. How to fix this? I believe this is a Cosmo model about 5 years old.
Im putting in a blower motor in my heat n glo 6000TR OAK where do i put the sensor?
I have a question for you if you possible to reply my question . I owned heat n glow 4000gdv having some issue . I got it on and running but it will shut off it self after it run for 20min . Do you what does cause this issue
by might have I mean I might have not pressed it fully. But should I press it again? If not, then what do I do?
My hi/lo adjust knob stuck on lo, in 2005 . New and replaced that unit with the knob, has 4 bolts, but flame is still low even turning to hi. So does the pressure need to be increased or just a new gas valve needed?
Same here. You find fix?
Is there a high temp safety feature that turns off fireplace at a certain temp? My pilot light remains on and I turn my fireplace on by flipping a switch, fire turns on but about 25 minutes later it goes out but pilot light remains on. What is going on?
hi my remote doesn't show the PILOT IKON i have restarted using the paperclip on the control panel but it seems the pilot won't light.. it times out. it has been working until yesterday..
I accidentaly pressed the igniter by bumping it and this small group of flames went on, pressed it again (might have) and didn't go away. HELP!
Just moved to the house and the Heat&glo fireplace has two switches. One on each side of the fireplace. How do I turn this fireplace on?
try one. if it doesn’t work, try the other one.
Buyer Beware Heat & Glo, you have to use their controller, can't integrate into your Thermostat that controls the rest of your house, And it won't work with any wifi or iphone or other phone apps.
Heat & Glow has a beautiful fireplace with technology that is garbage, unreliable, 10 to 20 years old. An old fashion touchscreen monitor on the remote that shut off after seven seconds. And Wi-Fi module that loses connection doesn’t work nearly 80% of the time. The phone app is limited in buggy. Even when it’s working, there is no setback to turn the fireplace to a lower temperature at night as if that’s a new idea?
Anyone know if I can make the flames bigger/brighter but have the heat output low? My flames are tiny yet the living room feels like Hell.
These things suck
😮😂