03 ESP32 Wi-Fi and Web Server | Web Pages to Control LEDs over Wi-Fi in Access Point & Station Modes
Vložit
- čas přidán 7. 08. 2024
- In this video, Joed Goh illustrates how to set up and configure the built-in Wi-Fi of ESP32 - Soft Access Point and Station modes. It highlights three (3) sample programs: Scan existing Wi-Fi networks within range, a web page to control blinking LED over Wi-Fi in station (STA) mode, and a web server for controlling LED sequences in soft Access Point (AP) mode.
Table of Contents:
00:00 Introduction
00:52 Materials
01:30 ESP32 Wi-Fi explanation
03:30 Wi-Fi Scanner program
07:00 Wi-Fi Scanner program (OUTPUT Demo)
08:28 Simple Wi-Fi Server in STA mode
12:30 Simple Wi-Fi Server in STA mode (OUTPUT Demo)
14:19 Web Server program in AP mode
22:25 Web Server program in AP mode (OUTPUT Demo)
25:58 Programming Challenge
Related Playlists:
Embedded Systems using Arduino Uno
• Embedded Systems using...
Android App Development in Kotlin
• Android App Developmen...
Artificial Intelligence and Machine Learning Foundations
• Artificial Intelligenc...
Designing Database Solutions with Microsoft SQL Server 2019
• Designing Database Sol...
Data Structures and Algorithms using C#
• Data Structures and Al...
References:
arduino-esp8266.readthedocs.i...
www.instructables.com/ESP32-A...
lastminuteengineers.com/creat...
electropeak.com/learn/create-...
randomnerdtutorials.com/esp32...
Every single one of your videos is amazing. Great content, perfect presentation. Easy to understand. Thank you for sharing your knowledge.
Thank you! Appreciate your comment 😊
Thank you for your videos, They really help me a lot.
Wlecome and thanks!
Exactly what I was looking for, Thank you!
Welcome
Salamat sir. Very clear and easy to understand. I learned a lot!
Great Session!
Thanks for this video you have no idea how much you have helped me, just thanks.
Glad to be of help 🙂
Excellent explanation, Joed!
Thanks for watching! 🙂
Iba ka talaga sir Goh! Nakakamiss maging studyante nyo. Marami akong natutunan sa inyo 😁
Maraming Salamat! 😁
You are just genius bro.
God bless you and always stay happy and healthy.
Thank you. I appreciate your comment 🙂
Great Job
Excellent. Helped me a lot. Thanks
Great to hear! 😊
Excellent video and demonstration
Thanks!
You never disappoint me
Thank you!
Hi there, loved your educational series. I have a question for you. What is the best solution for communicating with 60 different identities Esp32 via Wi-Fi ?
hi Joed. thanks for the great video. How can I get a copy of your codes? Thanks
Totally new to ESP32 how easy would this be to use toggle buttons instead of standard button?
WiFiClient client = server.available() returns 0 and the code does not enter the following if(client) function. Pl help
Hello can you do a tutorial about integrating DF Robot Gravity Analog pH Level sensor and DF Robot Gravity analog EC meter into ESP32-WROOM-32 IoT Development Board to Arduino IoT Cloud?
E (218950) gpio: gpio_set_level(226): GPIO output gpio_num error, what does that mean sir?
Android connects to wifi network with "Keep connection". But iPhone does not connect?
I've just started to learn ESP32. I've been building projects with Arduino for year, but it was time to move up to something more powerful.
I'd like to confirm something that I've noticed and been able to confirm what's causing it.
I watched the video and what I'm seeing here on 2 different ESP32 boards (one is 32 pin, the other a 38 pin) is different.
I edited my orig comment to make it shorter.
Long story short, what I see with my 2 boards, is the moment that
*WiFi.mode( WIFI_MODE_STA )*
is executed in setup, the Blue onboard LED is on constantly. Actually, it flickers super fast and even though no more code is executed, the light stays on (like super fast data transfer). I also confirmed that it's NOT related to Serial as I disabled all of that.
In my test sketch, to confirm what I'm seeing, I started sta, waited 10 seconds then *WiFi.mode( WIFI_MODE_NULL )* to stop WiFi.
*The LED goes out and functions normally.*
I figured that since everything seems to run ok, this must be an indicator that WiFi mode is set. And yes, any of the mode functions have the same effect, except, Null, of course.
*But in seeing the video*, I see that *WiFi.mode( WIFI_MODE_STA )* is executed in setup, but the Blue onboard LED does NOT light up and go nuts.
So now I wonder, do I have a problem here?
Is this a library problem or could it be a firmware issue on the 2 different ESP32 boards??
As I'm new to ESP32, I'm not where to find the right firmware files to update them or even how to see which firmware version they currently have.
So can anyone confirm if this is a problem or if it's just how some ESP32 boards work?
I should say that one of them has the word, WROOM on it and supposedly it's:
*ESP-WROOM-32 Chip CP2102* (38 pins)
The other one says, *ESP32-D0WDQ6 Chip for IOT.* (30 pins)
So as far as I can tell, they are different, yet with the WiFi mode set, they both have the Blue LED steady on.
Does anyone know??
Thanks in advance.
Hi Joed, thx for the great video. Question, do you know what is the range when using WebServer SAP? Thx!
Thanks. It depends on the model and antenna, and other factors like walls or open area. Typically 50 meters up to 200m
@@joedgohWhat about as an Access Point? 6 to 10 meters? It's possible I get the terminology wrong 😅
Hello im new to this, i see that you are not using AsyncWebServer and SPIFFS, may i ask what's the difference and which one should i use (your video or these 2)?
because my teacher told me to use AsyncWebServer and SPIFFS. but from your video i can't seem to see the difference in function of using your method and my teacher's method, it seems to have the same output
hello, can i please get the code for the challenge? I just want to do some modifications of my own :)
this ip can be static ip
I need some help. The server can be accessed by clients on the local area network, but how can I deploy it to be accessed by my devices anywhere on earth through the internet? is there restrictions on the ESP to achieve this?
the remaining lessons will answer your question.
Hello, when you give the web page more style, there's a line of code that cuts out, could you provide the rest of that code please?
Ok. Email me pls.
joedgoh@gmail.com
Hi sir, ask ko lang kung meron ka po bang uploaded video na timer switch for light.
Wala pa po. Can you give the expected behavior nung "timer switch for light" na hinahanap mo?
@@joedgoh i mean switch timer po sya for arduino
Wow this is really damn well explained, thank you very much. This is perfect for my model building. I have a question can you also store a picture, because as far as I know the esp32 can not do that, but maybe I'm wrong.
Yes you can store images to the flash file system. You can search on SPIFFS and AsyncWebServer. Thanks!
hi sir i did nothing wrong but its giving me that the handle_ONConnect' was not declared in this scope
the error is in the beginning
Pls check for case sensitive declaration of your function or possibly wrong spelling.
Hi. Joed, Do you have a website where I can get a copy of your video codes
Hi, pls send me an email request for the source code that you want. joedgoh@gmail.com
Thanks
@@joedgoh Hello, can i also ask for all the source codes from the Internet of Things playlist you have? I've sent you an email.
Hi, is it possible if in 1 wifi network I want control or remote 3 Unit ESP32 using web server?
Yes, they all will have different IP addresses and you can each device's webpage by inputting that IP address. One issue you will encounter is that you will not know which IP addess is which device. You solve it by having your WiFi router to "Bind" each device to a separate IP address. That way each device will get same IP whenever they connect to the wifi.
Hi there, could you share your code, thanks
This project internet based or local area network based sir ?
Local
@@joedgoh how to make internet based with just esp8266 01, not esp32 or nodemcu?
Sir how to get this video code please tell me sir.
Pls email me. Thanks
Where the code link. Its bad expernce
hi sir please upload video on microphone max4466
Thanks for the suggestion
Share you code
Wait. I will get you a spoon