Black Horse Fieseler Storch 2850mm wingspan (112.3inch) Giant Model Airplane!
Vložit
- čas přidán 18. 02. 2022
- Order yours from Motionrc
www.motionrc.com/products/bla...
This model has been a labor of love but we finally got it all correct and it’s a beautiful bird now. It’s flying on two 6s 5000 smart packs on a power safe receiver. Using the recommended admiral motor and gecko ESC.
The Fieseler Fi 156 Storch (Stork) was a German liaison aircraft built by Fieseler before and during World War II. Production continued in other countries into the 1950s for the private market. It remains famous for its excellent STOL performance and low stall speed of 31 mph (50 kmph). French-built later variants are often seen at air shows today.
The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 30-35cc displacement.
Features:
High level of prefabrication right out of the box
Lightweight, strong, laser cut balsa and plywood construction
Panel lines and details printed directly onto the pre-applied, high quality covering
Aerofoiled tail surfaces
Recessed hinges on all control surfaces
Pre-drilled hinge mounting holes
Heavy-duty pin hinges on all control surfaces
Large easy access fuel tank/battery/servo access hatches with sprung loaded latches
Painted and detailed cockpit, pilot and interior included
Fiberglass control horns with ball link connector
comprehensive control and fitting accessories included
Two-piece, plug-in wings simplify transportation and assembly
Fiberglass cowl and glass reinforced landing gear covers/pants
Mounts for both electric and gas power options included
Fully illustrated instruction manual included and available for download (see tab above)
Includes:
Black Horse Fieseler Fi156C Storch 2850mm (112.2") Wingspan - ARF
Requires (Electric):
6 Channel radio - select a minimum 6 channel radio from our Radio Collection
6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
2300-3300 Watt Brushless Outrunner Motor - we recommend the Admiral GP26 6330-245Kv Brushless Motor
85-120 Amp Brushless ESC - we recommend ZTW Gecko 120A ESC OPTO High Voltage Brushless ESC
8-18 Amp UBEC - we recommend ZTW 18A BEC / UBEC
7x 45g standard servos - we recommend HS-625MG
For 8S setup TWO 4 Cell 14.8V 5000 mAh LiPo Batteries with EC5 connector - we recommend TWO Admiral Pro 5000mAh 4S 14.8V 60C LiPo Battery with EC5 Connector
2 to 1 EC5 series adapter - we recommend Admiral EC5 2 to 1 Series Adapter
Electric propeller - we recommend APC 19x10 Thin Electric Propeller
6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
Engine: 30-35cc 2-stroke (NGH GT35 recommended). 38-42cc 4-stroke (NGH GF38 recommended)
Gas Propeller: 18x10 - 20x8 (2 Stroke and 4 Stroke)
Customer Note
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine). - Zábava
Wesley / Papa. That bad boy has presence in the air. Looks like full scale. Well done. 👍👍😊
That's fantastic work getting the Fieseler Storch finished and flown! Excellent flight, landing, camerawork and video Boozers! Thumbs up! Best regards!
One of my favourite planes.....Just epic! Thank you!
Awesome plane! The power-safe receiver came out just in time.
Very nice Trimaiden. Looked like it was flying very well for you. I know you are pleased to have a successful result after all that work. Well Boozered!
Beautiful rollout and takeoff, smooth flight and Sweeeet landing Pilot Wes!
What a great plane, and what a great hill behind you for sloping.
Mount trashmore tallest mountain in Florida
Nice job. Congratulations!
About time, well done, Jeff in LA USA
It looks awesome guys 👏 very nice job.
can't beat that! Nice vid boozers!
Cool, looked like the real thing!
I have not seen a model Storch doing scale-like STOL and extreme slow flight yet. It looks to me like most are too heavily wing loaded due too heavy light-ply laser cut construction. The full scale Storch flew at 110mph and took off and landed in a very short space. I'll bet that Pat Tritle could design a very lightly loaded 60 inch wsp model Storch that would fly very scale-like on a small light but adequate brushless motor/prop and battery combination albeit in calm air. Congratulations on getting the BH version flying as well as you did.
Persistence!
Cool
That is just awesome. Above my expertise. I love to see big planes low and slow. Did you say this flight was December 22nd?
A beautiful model. Great job. Great weather there.
Guys, I want to say this has been a great experience between Wesley and myself. Sometime frustrating, but always a challenge. In todays Modeling is the lack of challenge. I must ask you, are you really challenging yourself. Maybe its time to assemble something that takes more than four screws. This plane still does not fly like I want it too, still challenging.
I hope this makes you think about your hobby and where you are going. Maybe your missing the challenge!
Well done guys. Your setup is very similar to mine. Where is your cg at? I had mine way too nose heavy at 115mm measured from LE of slats.
Have you gotten it to slow down on the landings...Looks a little hot on landings? I just bought a 1/6 scale (93) inch Fieseler Storch kit. Its going to take a while to get it together. RC
The storch is a unique plane do you have the slats operational.
Storch had fixed slats. Flew a real one.
They are fixed on this model
Nice maiden! What's the flying weight and wing loading?
It’s around 30 pounds
@Merry Boozer RC Thanks - any idea on the wing loading? Curious because that’s what would make it fly like the real one: a nice low wing loading 🙂
Fantastic work , beautiful model ,, I think gas powered would have add the purist touch , feel and reality !!!!
Gas expensive