Polo 9n3 short shifter install & upgraded shifter bushes
Vložit
- čas přidán 7. 08. 2024
- This video is to show the install of the Creations Motorsport short shifter and the BarTek shifter bushes on my polo 9n3 1.4TDI. These upgrades are designed to shorten the throw of the gear shifter as well as reducing slack in the shifting system by replacing the factory rubber mounts with solid aluminium bushes.
This install has some slight differences in comparison to the polo 9n3 1.8 GTI shifter bushes.@CarsandEngineering video was a big help in the installation of mine:
• Upgrading The Shifter ...
Thanks for watching! Please like and share if you found this guide helpful.
I appreciate all the support, I've got lots of videos in the pipeline!
Follow me on Instagram to see all my car updates and modifications!
Instagram - / moore9n3
Music released by Carbon Citizens
Original Upload: Carbon Citizens - Redline - • Carbon Citizens - Redl...
Click Here To Stream On All Platforms: fanlink.to/CCallstream - Auta a dopravní prostředky
Good video mate, thanks for the shoutout 👍🏻
You're welcome man! It was very helpful cheers
2007 Polo GTI both were 10mm and no retaining clip on the top arm. It has a platic fold down tab, no need to shave it down, just apply a bit of force and it clicks into position.
How has it been holding up a year later? I have been thinking of getting this installed in my seat lon
Se fosse de fácil acesso essa peça aqui no Brasil seria incrível😢
I dont know anything about cars. I have a modded mk3 polo, i want to put a short shifter on?
Hey mate, for the upper shifter arm did it never have the metal retaining clip at the end? Just had a look and mine doesn't have one either. Might have to do what you did with the bolt through the plastic...
No mine didn't have the metal retaining clip annoyingly. Not sure the 1.4s have them on the upper one. The 1.8gti's do I think. So yeah this was my best solution to keep it secure.
@@lewismoore9n3 where i can buy the retaining clips?
Does that mod work on my 2005 1.9 pd130hp tdi Polo 6 speed?
Yes for the pd100 and pd130s it would. Should be the same as mine. Just need to be aware of the different size holes on the new bushes that may need modification like mine did.