CNC TUTORIAL - Engraving text with jscut - V-Pocket
Vložit
- čas přidán 13. 01. 2020
- theisolab maker lab - Invent, Design, Build
In this tutorial we are going to test jscut's v-pocket function. With this jscut function allows us to create the gcode for text engraving. In the video I use a united writing created for another tutorial with inkscape, so if you are interested in how to prepare the writing go to see the video. The end result is acceptable considering that a non-quality v-bit cutter was used. - Jak na to + styl
Ciao, ottimi video come sempre, volevo chiederti una cosa perchè sta capitando una cosa un po' particolare, ho fatto delle scritte seguendo i tuoi video, poi le elaboro con jscut, il problema arriva quando le esegue la cnc , esempio sta scrivendo Nora, fa giusto la n, sta facendo la O e a metà della lavorazione si scombina come dire le coordinate, magari scende di qualche mm, o a volte di cm, su una scritta auguri perfetta la A poi il resto della scritta l'ha fatta sotto come se fosse andato a capo e riniziato a scrivere. Ideee? ciao grazie
why create a video with an English description but then speak something else?
The title is meant to be in Italian. It's not the author's fault if some technical terms are in English.