Replace the handle on your broken kitchen knife
Vložit
- čas přidán 17. 10. 2020
- A guide video for repairing the handle of your favorite kitchen knife using wood.
Minimum tool requirements are a saw and a Dremel type tool with wood shaping attachment to shape the handle. - Jak na to + styl
I am the owner of this small knife. Andrew has done a fantatstic job!!! The handle feels good in my hand. I did not realise how much technique and skill are needed to make what I thought is just a simple knife handle. Wow!!!!!! I will cherish this more now that I have seen how this has been done.
Amazing, I’ve never seen a post by an Orangutan before (jk). Were you chewing on the handle?
Thank you for your presence and may God reward you I am following you from Egypt A plastic handle would be better because wood has a short lifespan
Wood can have a short lifespan if it isn't looked after properly, however the wood used in this handle was Belian which is one of the most durable timbers in the world and is extremely rot resistant.
Exactly what I need! The chef at my restaurant asked me to restore his first chefs knife as it will be his Xmas gift to his son, this video saved me alot of headache thank you
Glad it was a helpful video
I do the pins during glue up. They grind off really easy with a belt grinder/sander.
I recommend shaping the front contour of your handle before attaching it to the blade to avoid scratching the blade.
I agree but if you forget.... a small file with one blank edge or just some sandpaper glued to a popcycle stick.... Don't ask...
Wow man, you have some hammer skills!
Well done! Beautiful!
Thank you!
It was probably only the third or fourth time I had done something similar to this. I previously made some marking knives for my woodworking as I was unable to find quality ones over here.
We have a set of Sabatier knives that have all started cracking. We have never put them in the dishwasher so we were very disappointed at these so-called quality knives doing this. But now I can use your method and put some real quality handles on, so thank you for such a good method. I might even practice with dowels instead of metal because the contrasting wood might look quite good. Thanks for showing me how it can be done. The only problem is that I don't have such an expensive sanding wheel as yours, only a handheld sander. But we will overcome!!
I'm always happy when people use the methods I show them to get some diy done, even better when it saves them from throwing out something that should still have years of life left.
The sander just makes the job quicker and a bit easier with the platform, you can use a belt sander turned upside-down if you have access to one for the same sort of effectiveness just remember to position the sander so the belt runs away from you so if you make a mistake the knife goes away rather than towards you.
Brass welding rod!
Thank You!
Right let's do this!
Cheers!
Simple, cheap and easy to get your hands on.
Much better than expecting people to find specialised pieces.
@@MakeinSarawak It worked a treat!!
Got some really nice hardwood from an offcut of engineered floor - super dense I don't know what wood it is but it's heavy, dark and sanded it to near mirror with 1500 grade (no it's not plastic wood by accident!) and sealed it.
Cheers for this!
@@RedwolfDogrocket awesome to hear everything worked out for you!
That's a pretty nice knife to have a full tang
Wondering what sort of wood I could use/source in the USA? Teak? Ipe?
Teak is naturally more waterproof than most other woods but as long as you treat the wood with something like tung oil, the wood should be water resistant enough for daily use and cleaning.
Emek çok değerli...
Handle looked like a couple of mine after wife ran them through dishwasher. I didn’t tell her they were expensive and should only be hand washed. I purchase her a set of of Victorinox to use.
I'm not sure what happened to this one as it belonged to my Uncle but I know I have the same sort of rules with my good set, hand wash, no scourers etc.
Can you help making the top of a Chinese knife smoother so when I use it it does not give me blisters?
I certainly can, we are in lock down again at the moment so I can't travel to my MIL to get hers for the day so I will have to look around for one within allowable travel distance that I can get my hands on.
great work, i wonder if i ve should use a piece of a broken cutting board made from bamboo
You can use pretty much anything you can shape with sandpaper using this method, bamboo should be quite good as I believe it has good inherent water resistance.
@@MakeinSarawak i really appreciated your words thanks
where do you find the replacement pins that were pushed through?
The pins that I used are copper braising/welding rod and should be found in most hardware stores that sell welding equipment.
They will come in about 3 ft/1 meter lengths and you cut them down to size.
Other metals can be used as well but these are softer and easier to work with.
@@MakeinSarawak thank you
My knife handle is broken and the knife tang is very short. I dont know how to describe more. Can you help?
It is possible to weld an extension on but depending on the cost and value of the knife it may not be worth doing that option for you.
Another option is to make a middle layer that is the same thickness as the metal of the knife and use that as a spacer for the areas of the handle that the knife tang doesn't reach.
The last option, which usually gives the nicest result but takes the most work is to carve the wood out of the surface that will be glued to the tang so that it fits together without any gap.
This depends on how long the tang that you have available is, if it's just a short broken stub then welding it first is the only option.
very helpful! I dont think linseed oil is food safe. I might try using mineral oil or beeswax on my rehandle jobs but thank you for the the demonstration!
Original boiled linseed would be fine but even then once the dryers have evaporated off it doesn't leave nasty stuff behind anyway.
To be extra careful you could use tung oil which is both food safe and waterproof.
what kind of wood ?
This is a wood known as belian, it is a locally grown wood and the state tree of Sarawak.
@@MakeinSarawak Thansk MIS!!!
Use masking tape on the blade!
Matey for a How to video you Completely missed the area Of how to get the Rivets out or is this men's shed Secret Stuff ...Geeze alI wanted was some method to get the Rivets and Handle Off an Eight inch Scanpan Cooks Kniff...🦕
Around the 2 minute mark I split the top of the rivet with the dremel tool and a metal cutting bit.
The easiest method of getting the rivets off depends on the type of rivet they used. If they are the blind press type like in this video then just splitting them at the end will cause them to weaken enough to be pulled of with some pliers.
If it's a pin like the type I replaced it with then cutting the top few mm off or drilling it in a few mm should allow it to drop back through the hole.
@@MakeinSarawak
Onto to it Now 👍⚜️...Would a Rope Handle Set with Resin work ?have you ever tried Such ,?
Thanks for Following through with Method ⛩️
@@jeremylivingstone4110 rope like a para-cord wrap?
Not sure what you are asking about with the rope and resin part.
If you are talking about setting some rope in resin and then making scales from it, it should work fine if you can get enough penetration into the rope through either a vacuum or pressure pot.