Video není dostupné.
Omlouváme se.
67-72 Chevy & GMC Truck 1-Piece Side Glass Install - Remove Your Doors Vent Window
Vložit
- čas přidán 18. 08. 2024
- Complete step-by-step process on installing BROTHERS One-Piece window kit in your 67-72 Chevrolet or GMC Pickup. This easy mod installs in just a few hours and smooths the appeaance while eliminating nasty leaks and whistles inherent with the original Vent. Dave Welch is a classic truck specialist and he's got plenty of tricks for nearly every project on your classic!
Product Link:
www.holley.com...
Connect with us:
Instagram: / brotherstrucks
Facebook: / brotherstrucks
You should be asking for a raise David. Not my year of truck but good to know. Always appreciate your shows. Haven't watched TV in years and don't miss it. Thanks again you always do a good job.
Thank you Mark for always watching and for the kind comments!
Don't get me wrong it's a great look, nice and clean but, boy do I appreciate those windows' ability to hook me up with a good breeze on the hotter days in my non-ac truck💨💨🥵
But good video Dave , much better than the older video you guys had up.
Thanks !
I just received my kit for my frame off 72/67 restomod hotrod c30 short dually ! Thank you very much for this great video! Now if I’d of just watched it before I ditched those dang wing windows 😅
I’ve had this kit sitting in my garage for like 2 years now. Dreading to install them cuz I know they’re a pain in the ass ... even tho I used to be an autoglass tech lol
Alex, it's really not that difficult. Hardest part is setting the glass back into the sash.
I like my wing windows, they make for some good conversation starters. But, I sure do like that one piece window conversion, I just might have to do it.
My vent windows and tracks were to rusted for use. I found a Everbilt bi-fold door hardware set purchased from the local hardware store that worked for my front window tracks. Part # 360 570
good video. Great filming. This will be informative to those that are having issues with their window regs.
Thanks!
Good illustration!!
Sonic the Hedgehog 17:48 17:53. 👍
Good video. Keep them coming...
Sweet! I just bought mine 2 weeks ago!
Right on!
Great video!
Great video,Thank you
I like Dave.
I love the vent window , but I learned how to change the felt channels and sliders
Thanks for watching!
How sturdy is the window half way up. I tried one from another company not calling names. On a 85 K10 build . It was very sloppy and I wasn't impressed with the tracking of the window
Stable as a factory window and tracks the same too. We know who you are talking about and that is EXACTLY why we designed our own kit. Our kit uses a factory style channel in the front of the glass instead of the "other guys" roller wheel type channel. The result is that the glass stays in the channel front AND rear regardless of how for up or down the window is, making it 100% stable top to bottom.
Awesome video. Can you do one using the power window version and how to trim the stop?
Ruben, since the power version of our kit is a scissor lift like the original regulator, there is no difference between this install and a power version install. We do have a video showing how to convert to power regulators here: czcams.com/video/RvwYsAHU4Io/video.html
my kit came with really thin glass tape. the sash is no where close to being snug. ill have to order some from amazon no answer from Holley.
Can u do a video for square body
We are very close to releasing our own Squarebody 1-Piece Side Window Kit and we will 100% be doing a video on the installation.
Is that a hello kitty bandaid?
Yes, good eye! LOL
17:30 - Where can I get a new check Pin? Part number? (Bought this kit from Brothers. Works fine.)
It's a standard Roll Pin, your local hardware store should have them.
My glass gets stuck on the door whiskers? Not sure what I did wrong but it’s super hard to roll my windows up and down. Not power. Any help would be much appreciated. I love the look but just that issue is killing me. Thanks in advance
At the 13:00 min mark how is this section weather proofed ? It doesn't appear to have a gasket ...run a bead of silicone?
You could run a bead if you wanted, but this "triangle" sets into the door just like the vent assembly did and that also didn't have any type of seal to the door frame.
Maybe I missed it but when you installed the rear channel you said to align the hole in the aluminum adapter with the third hole in the door but you said nothing about the top of the channel. There's a hole in the channel that aligns with a hole in the door located near the top of the door. Should that be bolted down? If so, the channel interferes with the door latch. Should it be spaced out there as it was on the original channel before the bracket was cut off? A little clarification please. Thanks
The top of the channel will just float and doesn't attach to anything
Does this kit work on Chevy Vans from 71-77? Or do you guys offer one? Awesome video. Hope to be doing this conversion to all my up incoming van builds🤙🏻
It does not work on vans. We only carry these conversions for trucks at the moment.
@@BROTHERSTruckPartsTV hopefully you guys can make one cause they made vans all the way to 96’ so it would for sure be a huge seller
excellent now is there a power window kit for the one piece kit
Yes 100%! Here's a link: www.brotherstrucks.com/One-Piece-Power-Window-Conversions/products/2499/
Hola, hagan los videos con subtitulo en español porfavor.. saludos
Ok, Thank you!
Hi, wanted to know if you have this setup for a 85 Chevy c10 in stock yet?
Our kit is probably going to be released sometime late summer of 2021. It is being completely redesigned to function better and make installation easier.
It’s available to buy without the windows? Just the hardware
No sir, it comes as a complete kit.
I would be willing to donate my truck to remove mine .I’m sure I would screw this up .any takers????
Will there be a kit for an 81 in the near future?
We just finished engineering a kit for 73-87 trucks. Production kits should be available sometime late in 2021. Also, we expect to start pre-selling them in Sept or Oct of 2021.
Is there a kit for 60-66? Not seeing it on your website.
Nothing yet but we have one in the works!
@@BROTHERSTruckPartsTV Any idea on a release date?
@@texasplumr Nothing at the moment.
Ditch the wing? Sacrelige, along with losing the ashtrays. No, I don't want the smell of cigarette smoke in my ride, but those are period pieces and they go together like bread and butter. You see... when the ashtray got full on the road, you had to use the use the wing until your next stop. I know its silly, but it is pure Americana.