FOX DHX RC4 Shock Full Service + Tips PART 1
Vložit
- čas přidán 27. 08. 2024
- This is how I went around servicing my RC4 shock.
Relative simple procedure if you’re mechanically orientated. I found a brilliant service procedure on the FOX website, link is below; and i just followed that.
I found locally and used: Torco 15W RFF oil (specification: 8.40@100 and 33@40 and 240VI)
Was brought from: mxstore.com.au
Tools required:
- Normal allen key set
- 32mm Park Tool headset wrench (either one: HCW6/7/15) (3mm thickness MAX)
- 1” and ½” wrench or adjustable spanner
- Shock pump
- Vice
- Callipers
- Pliers
- Torque wrench (if possible)
www.ridefox.com...
SEE PART 2: • FOX DHX RC4 Shock Full...
Very helpful tips, as always! Looking forward to a permanent workshop setup I think you will need!
thanks. this was helpful
You've done by accident the very thing I'm struggling to do - I need to inscrew the shock 'can' from the cast 'head' where the piggy back chamber is. Was it just the same thread as the spring retainer? Did you just thread the can back on by hand? Thanks for the vid :)
Just like FOX's workshop setup...
the needle oring doesn't need replacement or something?
how much oil did you use??
how much oil did you use? more or less :)