Part 2 -Intake Leaks Troubleshoot and Repair No Start 2 Stroke Motorized Bicycle. That Sucks !
Vložit
- čas přidán 6. 11. 2022
- An in-depth tutorial on how air and fuel intake are critical to starting your 2-stroke engine. How to diagnose an intake, crankshaft seal or case leak.
Carb service video- • The Best Carburetor Fo...
How to troubleshoot No Start Playlist - • Part 2 -Intake Leaks T... - Auta a dopravní prostředky
Thanks for these videos I can now keep my 2cycle running without help. I love my 2cycle bike been riding for 10yrs now. I'm the only person that works on it.
You have a passion for motors. I started late . appreciate experience thanks bro
I work on compressors installs and service them good soap trick .never thought on a motor . Thanks again !
Awesome video explaining & troubleshooting the 2 stroke engine, thanks…
Very welcome. Thanks
Hey man, these videos are great. Always good to get to go back to the basics plus you always learn something new!
Glad you like them!
Ahhh! Finally! Thanks bro! I knew about the porting... but not about the air exchange!! For some stupid reason i thought air would get sucked from carb, to air manifold, to ABOVE the piston... Duh!! Wheres the fun in that right...Love your vids. Don't be suprised if I hit u up with a question or two.. But your vids are quite comprehensive so.... Was gonna buy the newer 100 model, but decided to stick with the 66 for the universal parts factor...
66 fan myself for the same reason
very informative, going to build my first motorized bike next week. wish me luck
Nice! This video is detailed. I recently got my first motorized bike, and i'm just watching various videos to familiarize myself.
Glad it was helpful!
Lots of helpful info in these, a bit overly detailed though, and I wanted to mention that the flaps on the carb break then we’re replacing a carburetor instead of just an o ring.
I really enjoy your videos you give a lot of good information.
Glad you like them! I try Thanks
Good job mate
Great help video. Thank you!
Glad it was helpful!
Great, with all respect. Thank you...Keep up the... HGW
Thanks. Very good.
Glad you liked it! Thanxxx
oh im having a long case of non starting engine here, started when it my chain broke the wall between it and magneto coil, i buyed a new block of engine, put my pieces on, changed cdi and magneto coil, and still not working, the motor pops, sometimes even have a strong pull but dosent get speed and keeps dying and dying, and stops, dont even pop anymore, then it rest somedays and it starts to run and dies all over again. Was an old engine 3y old, that always runned ok. But after entering mud and pieces of metal in contact with magneto coil, i could never put it to work again, even chaning the eletric part, spark plug was the first. Today i has a good spark, but just dosent run well, im suspicious about the magneto rotor being a little damaged (some scratches on it) and some leaking from the new cranck case. Ive changed my gas tank to a plastic new one, cuz the old had rust, thats all details i can remember. I will try next to take off the gas filter the goes inside the gas tank as you recomended, and check for bubbles too, i get back to you.
Question my stroke motor will start only for a second unless I'm peddling the whole time I'm on the bike . The carb was recently clean. I've replaced the fuel lines throttle cable. I wanna scream. I use this bike for everyday stuff.plz any ideal I would appreciate it thanks
Could you help me my 80cc 2 stroke engine it will not spark even though every hook up correctly and the kits brand new
I got it
It was the clutch then the chain broke so got to get that fixed waiting on my part
Appreciate your help,by the way if my exhaust is not completely connected will that cause my problem
Very informative video.
I have put together one of this engine and it works Ok with some hick ups. I think with your video I may fix that.
Couple of issue is have. One is that when running there is too much tail white smoke comes out. Other is that when engine stops, there is black oil drips from the muffler. Any idea how to fix these issues? Thanks.
Love that idea to check for air leaks! I will apply right away! How did you connect a Schrader valve to the tee 3-way female pipe?
used a 1/4" tank valve fitting amzn.to/3OHG4zZ
@@HughesMotorized thanks!
When I take my hand off the clutch, the back wheel freezes like the breaks applied. ‘Auto Morris 110CC 2 stroke engine’. Tried to start it for the first time and I got no downhill around here, hahaha. When I was pedalling, it was a double pedalling for both chains. I was told the spark plug connector could be loose cause’ the red one has just a spring in the back to hold the top of the spark plug. The chain may be a little loose or the plastic wheel isn’t right, but I don’t think that matters? I also don’t have a primer. Hahaha keep pedalling? I release the clutch and the back break freezes like the brakes applied. What do I do with that?
Your engine might be locked up. Remove the drive cover where the chain is and put a socket on the nut on the sprocket and see if engine will turn over
I have a problem with my bike, I would really apreciate if you could find time to help me. So it starts kinda hard, and then it idle properly, but when I left the throttle after a couple minutes of full throttle, it starts reving even higher. It had a problem staing on, even with the idle screw screwed all the way in so I grind a little from the flap to make more room for air. This solved the probleme, but on a new engine I think it will idle way to high.
This is a 66cc 2 stroke, piston port, with a full speed around 55km/h. And it have around 6000 km so far on this set, the bottom end have way more, around 15000km, but it dosent have leaks so I think its still working properly.
I recently change the piston rings, beliving that those could be the problem, and indeed the old ones were wore off. I didnt change the piston or cylinder yet, and it still rev like crazy after riding wot for awhile. I try with another carb and the same problem occured (with the same jet). Going up on the jet, will make the engine start easier, but its performance decrease semnificantly, getting only to 30-35km/h.
This new generation of sets from the past couple of years, I noticed have the piston skirt for transfer lower with almost 1mm. And have a sever decrease in performance.
Intake leak somewhere
post on my Facebook group. Hughes Motorized
I will try replacing the gaskets and seals before asking again ppl, I have to do my fair share of work as well.@@HughesMotorized
where is episode 3??
Coming soon... I'm off chasing some dream.
Put the leak gizmo on your store. I bet it'll sell
Give me another crank if you got
Morningkool