@@ftmikeyt Dynojet was having a issue with some of their tunes at one point. My only other suggestion would be your clutching, stock clutches on the XMR don't like anything over 30in.
it could be your belt slipping on the check engine light. i’m not sure. clutches would help if that’s the case, btw this is just an educated guess but a buddy of mines brute force does that anytime the belt slips. check engine light & cvt light
if you have your ecu flashed i wouldn’t think running a tuner is gonna help that might be why it’s cutting out like that bc everything on a can am is electric pretty much
I had the same problem I reached out to dynojet and and they sent me a updated tune And it works perfect now They are aware that that issue is going on so it won't take no time to get you fixed up
I have a hmf with a k&n filter and dyno jet cannot get mine right it has a slight miss and backfire when you let off what kind of tune do you have almost wondering if I should put the stock filter back in
I'm thinking that those other guy's have probably never worked hard for their money and stuff they have bought. Why else would you do that to the machine or let someone else do that to your machine. All I can say is WTH...
so much power that’s crazy
Need to come to Wild Country Off Road Park
I’ve been wanting to try it out!
@@ftmikeyt It is a nice clean park we go almost every weekend we can 2 really big sand bars that are always clean and trails are well maintained
It’s your tuner, my dyno jet did the same thing on my 21 850xmr. I got a MSA tune now
Awesome video that outlander rips!
Thanks! She’s a beast! 🤟🏼
I would check out the tune change the tune and see if it still does that prop is the tuner running to reach Orlean the safety mechanism cuts in
Have you tried to see what code it throws when the light comes on? If you have a PV3 you can hook up and look at old codes.
Okay, I’ll try that! Appreciate it!
@@ftmikeyt Dynojet was having a issue with some of their tunes at one point. My only other suggestion would be your clutching, stock clutches on the XMR don't like anything over 30in.
How do you have that sound bar mounted on top of the rad?
I like the vids, only thing I would recommend is a mic for the go pro
you can run it in echo mode 1st then switch it over to sport try that
hell yea just send it
Yessuh! 🤟🏼
it could be your belt slipping on the check engine light. i’m not sure. clutches would help if that’s the case, btw this is just an educated guess but a buddy of mines brute force does that anytime the belt slips. check engine light & cvt light
Appreciate the info! I’ll look into it!
if you have your ecu flashed i wouldn’t think running a tuner is gonna help that might be why it’s cutting out like that bc everything on a can am is electric pretty much
I never asked but how much difference did you see in power with the 520 92mm piston in the 420?
Not too much power but A LOT of low end torque!
@@ftmikeyt awesome! I got a 420 IRS and I’m putting in a 92mm Wiseco piston and boring the 420 top end
YOU NEED CLUTCHES DUDE. GET FULL ST IM TELLING YOU IT MAKES A KILLER DIFFERENCE
Thinking real hard about it!!
I had the same problem I reached out to dynojet and and they sent me a updated tune And it works perfect now They are aware that that issue is going on so it won't take no time to get you fixed up
That’s what I’m going to do! Appreciate it!
@@ftmikeyt yw Anytime
I have a hmf with a k&n filter and dyno jet cannot get mine right it has a slight miss and backfire when you let off what kind of tune do you have almost wondering if I should put the stock filter back in
You still plan on going Sunday back to zona?
Yessir!
I am putting 30 inch bkt on my 520 how bad are they going to scrub
Just a little on the back floorboards!
What kind of pipe and tune do you have
Single RJWC and Dynojet PV3!
What is the name of this park and where is it located?
Zona ATV Park and it’s located in Enon Louisiana!
CC?
850!
First
Why are they destroying there machines? I just can't understand.
That’s what I’m saying hahaha
their* and it still runs perfectly!
@@carsynmoran5513 sry, english aint my foreign language, thanks for pointing that out :)
Thats what there meant for 😂
I'm thinking that those other guy's have probably never worked hard for their money and stuff they have bought. Why else would you do that to the machine or let someone else do that to your machine. All I can say is WTH...
I believe that motor was on its way out and they wanted to finish it off haha
nah our daddy bought it for us might as well tear it up so we can get a new one
@@carsynmoran5513 i was just tryna piss him off more