HOW TO DRAFT QUEEN ANNE'S Neckline ||
Vložit
- čas přidán 25. 08. 2024
- Hello guys welcome back to my channel. In today's video I will teach us how to cut Queen Anne's neckline. Kindly watch the video to the very end and
You can also check out my other videos.
#queenanne'sneckline #queenanne'sneckstyle
• HOW TO DRAFT QUEEN ANN...
• HOW TO SEW AN A-LINE M...
• HOW TO DRAFT A MILKMAD...
• HOW TO CUT PRINCESS DA...
• HOW TO CUT A SIMPLE CU...
• HOW TO SEW A BUSTIER W...
• HOW TO DRAFT A BUSTIER...
• HOW TO CUT A WRAP TOP ...
• HOW TO CAGE A BUSTIER ...
• HOW TO CARIBBEAN GOWN ...
• HOW TO DRAFT UNDERBUST...
• HOW TO CUT ORGANZA TOP...
• HOW TO CUT A TRENDY BO...
• HOW TO CUT A FEMALE SH...
• HOW TO CUT A SIMPLE WR...
• HOW TO CUT A CORSET WI...
• HOW TO CUT A KIMONO JA...
• HOW TO CUT AN A- LINE ...
• HOW TO CUT SHORT TROUS...
• HOW TO CUT A SMOCKED (...
• How to Draft a Straigh...
• HOW sew a MILKMADE BUS...
• HOW TO CUT AN OFF SHOU...
Thank you so much dear……the easiest and very detailed tutorial I’ve seen so far. Pls how do I get the sewing video
Thank you for this comment, I showed how to attach the yoke to the bustier in the video.
Beautiful tutorial, thanks ma'am... please must I replace that overbust tightening on the armhole,must I create a new arnhole, can't I just add it on the chest line.... because my armhole looks funny after that replacement... please help me
It will only look funny if you didn't draft it correctly. The overbust tighten need to be replaced where you marked as the neckline measurement.
Thanks for this. But pls any illustration for the back??? And the shoulder will it be 2 pieces???
The back is a normal basic bodice with zipper , I used 1inche for the back depth and the neck width will be the same as the front.
You can also create a keyhole at the back or loops instead of zipper if you want.
Thanks for watching..
The front yoke is two pieces for each shoulder because I used bridal satin to line the yoke. however, you can use only your lace fabric, just use bias to tape the side of the yoke that touches your neck or make sure there is selvedge at the side of the yoke that touches your neck.
Thanks a lot for this, pls how can I get the sleeve
For the sleeve, measure out your full sleeve length and minus the desire measurement you want for the flare part of the sleeve.
Measure the circumference of where you want to attach the flare and multiple it by 2 since you will cut the sleeve together and whatever you get divide it by 3.14 which is radius of half circle , then fold the fabric first into two and fold again like a triangle. From the triangular edge insert the radius you got after diving by 3.14 and take the length from the radius mark as well.. Hope you understand
Please I don't understand the chest line aspect, the 7.5 chest line,how can I get it
What ever your back measurement is, half of it is your chest line. e.g if your back is 16 then half of 16 is your chest line
Is that 9.5 same as the nipple point of the client
9.5 is the shoulder to bust point measurement I am working with, so yours might be different