A Call From 7 Heavens because that type of retaining ring resembles the split metal ring with beveled points thats pushed through the cartilage of the nose of pigs and locked there to prevent rooting & serve as a means of leading the animal.
I just got the xtr circular saw, and its a complete animal! I continually cut 2 sheets of 3/4" birch ply for speaker cabinets and it cuts through 1 1/2" like butter! Very strong saw. Love it! Looks like the impact will be next!
Two years later and it is still $269. While I was at Lowe’s, I checked their website for online deals. Ordered online to pickup at store and the $269 impact came with your option of one free gift; two extra batteries, xtr circular saw or xtr reciprocating saw. Plus another $5 off coupon. Tools are great, free tools are even better!
Same here man. I actually just gave my milwaukee tools to my father in law for a early birthday present because I got all the new xtr tools and love them. Getting ready to add this impact to my collection. It would be AWESOME if kolbalt would compete with Milwaukee's stubby and gen 3 compact impact wrenches. I'm also going to be adding those to my list. I love kolbalt but I don't discriminate. If the tool does what it needs to when I need it to. I'll buy it. Milwaukee is definitely a quality tool.
I had one for work I work at a junkyard and kobalt impact would only get like half the lugs off. Now my Dewalt half inch on the other hand never fails even with extentions on taking torque away. Not hating on the kobalt just from experience the Dewalt has never let me down but for the price I guess it's not too bad
I've had the gen 1 for about a year now and really like it, have no complaints at all but I'm defiantly digging the new model! Might have to look into upgrading!
I have a few kobalt xtr tools, and 24 max they are a great value. The folding light is the best light I have ever used, I love how the impact and hammer drill feel, but I wish their triggers were more responsive in comparison to a Makita set I ended up with due to the recent free battery promotions. And the impact driver while more powerful than Makitas xdt14z is not as controllable nor is the lighting as good on the tool. But for the money, they are great, and I would have thought it was the best thing ever had I not gotten my makita set. Also, their multitool and compact reciprocating saw are fantastic never mind the value. VCG you should definitely review those you will be surprised how they compare if you haven't already.
I have the Makita xdt14z and the Makita xdt11z and I actually like the brushed 11z better. I bought the 14z for the mode that slows down at the end for things like screwing down like metal roofing which it is good for. However, in normal day to day use with wood, I like the 11z. I am building a deck with composite decking and preferred the 11z for the composite boards because the 14z is just to fast in top speed and too slow in second gear. While the T mode did not work out good either because the shavings would get in the way and after clearing them the 14z would start back out in full speed mode causing overdriving. I just have better control with the 11z and the driving speed is fast but not so fast it is hard to control in short burst like the 14z. I also have the OG Kobalt Impact displayed in this video and I am not that impressed with it's power since it struggled a little taking a lug nut off my wife's parent's car. I got it on sale for $169 though but I would prefer to get the Makita equivalent when funding allows. It is good but not for really tough larger bolts and nuts.
The XTR impact driver is a beast, i got a 3/8 adapter and used it pull idler arm bracket bolts that were torqued to 150 ft lbs on a rusty old ford ripped them right out.
@@ItalianoDio- Old post, but Kobalt has an XTR impact driver too, and that's what I think he meant, since it wouldn't be much to brag about for an impact wrench rated at 1200 ft lbs to remove bolts torqued at 150 ft lbs. The impact driver is rated at 2400 in lbs, which is 200 ft lbs, and when equipped with a socket adapter, it's more than capable of removing bolts torqued at 150 ft pounds. I keep mine in my truck, and use it routinely to remove lug nuts torqued to those specs.
Have that too, but more importantly, it’s a fan-cooled charger that you could hear the fan loudly running! I like the way it’s built, very stiff & durable.
Same company makes them(im guessing you knew that though) id love to see skil come out with a bunch more 12v stuff give Milwaukee a good run, competition is always good for the consumer.😁
I'm a tow truck driver . And usually 2-3 times per week I got a tire change call for some small cars up to a ford f350 size (i dont touch anything bigger) In a period of 3 years two kobalt high impact wrenches broke down on me.!! My body run mobile road assistance/ repair truck .And he using his tools very havy on daily basis.... %90 of his clients is semi trucks. He only using Milwaukee tools. Out of his experience this is only tools which is able to hold up really well to that massive obuse he put them through. And he did try them all , from chip walmart tools to ridgit and makita. So Wright now I'm looking for a good deal on Milwaukee high impact wrench.
This new line of tools are very impressive! I'm still going with my milwaukee fuel 1/2 impact because I'm in the platform other than that kobalt is a great choice.
You're tightening the lug nuts in the wrong order. That can cause warping or flexing and some of the nuts can become loose as you keep tightening the other ones. They have to be torqued in a cross pattern.
I have been looking for a impact wrench I was thinking about getting the Milwaukee but I think I might get the xtr, I also got one of you hats it’s super nice! SMASH THE LIKE BUTTON!
Most people don’t need 1200ft lbs like the kobalt xtr or 1400ft lbs like the Milwaukee high torque. Most people only need a mid torque impact. I do have multiple Milwaukee and 1 xtr, but I’m a farmer that works on his own equipment. Even working on our own equipment, we only use the heavy high torque’s when the mid torque’s don’t get it done. We have multiple Milwaukee and dewalt mid torque impacts and they’re the “go to”. much lighter, more compact, just more manageable.
Vince is a damn good sales man, convinced me to buy the skil 12v stuff, very pleased(also have dewalt,porter cable,bosch,ridgid,ryobi and a few off name items all cordless. Yes its kind of addictive. Love me some tools.
So why do I spend my time watching your videos??? Because I get an honest review, honest opinions, honest demonstrations with real world problems and things that we run into out in the field-that’s why! AND most importantly…THANK YOU for putting a JACK STAND under your truck after you jacked it up!!!!!!!!! You’d be surprised the number of videos I see where people just use a hydraulic jack and then get up underneath it. They don’t realize it’s a simple rubber o-ring or rubber cup holding that hydraulic fluid in the cylinder keeping that jack holding their vehicle up in the air. It can fail! It can fail!!! Most times you don’t get a second chance. Good review, thanks for the video.👍
I love this Kobalt XTR 1/2 impact, been using it the last few months. Quick note a 6 amp hr battery will fit in the case without needing the foam insert that comes with the impact. Its not like my Milwaukee 2767 but for the power to price ratio and the warranty I don't think it can be beat. 5yr warranty on the tool and 3 yrs on the battery. To compare harbor freights earthquake 1/2 impact only comes with a 90 day warranty and then you have to buy the extended warranty making the Earthquake significantly higher. Anyway another great video in the books.
Again I'm sold on this tool.. saving my pennies to cop me one.. I bought a kobalt hammmer drill a few years back I use it a few times with the 2ah batt.. it kick ass!!.. I'm a Rigid man but not for long
I have the previous generation 1/2” impact wrench. Tempted to get the XTR or Milwaukee high torque, but to be honest, working on Jeep suspensions and old rusty bolts on older Jeeps, I haven’t needed more power. And I like that it isn’t so easy to over torque a fastener with it.
I brought the older one a few months before the xtr was released. But I'm not complaining, I really like the older one so I wont be replacing anytime soon.
I got the makita high torque impact wrench, witchbthos kolbalt looks to be word of warning on these high torque impact wrenches, the gears can bind and burn out and lock the tool up, i had my makita serviced, the rep said that its quite common in the makitas, i would assume I may apply to other brands as well. But for the extra cash the 3 speed one is the way to go, I use mine daily
Hey Hey Vince, I clicked on because of the KOBALT LINE?!! I'm hoping to get into the Kobalt line as a DIYer. Saving for a Combo kit 🙂☺️😊 l Love the Royal Blue. Thanks again for sharing your thoughts and videos Rodney
I would love to see the same 2 impacts here tested against each other again on something where they struggle. For example, I tried to use the old style today and there was a bolt it would not take out on a semi flywheel. I wonder if the xtr would have taken it out
I work at a junkyard and the kobalt barley gets any lugs off. My Dewalt half inch tho is badass gets everything off that I need even with extentions on taking torque away. Dewalt gang!!!!! Lol
I run makita. But I love tools and knowledge. I like to see other brands battle it out in case I ever need something I don't have. Saves money, time, effort.
I own the old version and yes you can choose the speed its in the trigger, if you pull trigger all the way when you start that will be max speed however pulling the trigger to about half way when starting will give you a lower speed, and as obvious as that may seem it does state this in the instructions
VCG Construction man i love your show great job showing what these tools can do with your shall I say expert advice. Hands down best on CZcams you guys should get a stand up applaud 👏 great job guys best in class hands down been a sub for a while now since you guys started. I watch every single video you guys put out puts me in a good mood watching you guys since this pandemic hit it killed my BUISNESS been out of work since March and watching you guys makes me feel like I'm on the job!!! Absolutely love it. Unfortunately I had to sell all my tools to pay rent in these hard times. But you guys bring a little extra happiness to this stay at home bs. Be safe and keep up the good work have a blessed day love you guys.....
I’m here looking for the best bang for the buck alternative to milwaukee. I know I know, I’m a milwaukee fan but don’t want to spend too much just to do small repairs on my vehicle. Bigger work gets sent in but I would like to do some myself.
A weird idea hit my head, I’d love to see Vince & Scotty Kilmer review together!! Man, I know Scotty talks about cars n stuff.. but, they would influence each other of their own knowledge/experiences, and people would enjoy the show 😄😄
I have tons of kobalt tools and what compelled me to visit your video was I'm sick of using a four way. Wanted to see if this lives up to it's standards.... I'll be back after video lol
Kobalt is certainly upping their game! very impressed with the tools they have been rolling out. Now they just need to increase their battery selections
FYI - the Kobalt electric mowers are HALF off right now, but just the push ones at my location. The self propelled are like 15 percent off. $249 for the 80 volt push mower is awesome.
Also at mine. $250 push, $300 for self propelled. Greenworks self propelled $249 push $259, how that makes sense, I don’t know. I’ve been admiring these all summer but my bad experience with kobalt’s warranty department on a string trimmer has me leary. I hate to pass but a don’t need another peice of garbage after 5 minutes of use!
@@matthewpeters8790 I need self propelled because my property is hilly. If the propelled unit was half off I'd bite but it ain't, so I'm gonna pass too. But I like the idea of no gas, oil, carb cleaning, etc.
I have both of these, the XTR would NOT break the lug nuts loose on my 93 dodge dually. 5/8 studs with 1 1/8 nuts. Ended up breaking them lose with 3/4 rachet.
Picked up a Gen 1 on sale about a year ago for 170.00. Tool/4.0 battery/ charger and bag. Great tool for simple car maintenance. Gen 2 seems awesome but no need to go out and buy it, maybe the 5/6th gen lol
BROTHER I LOVE WHAT U DID WITH THAT KOLBAT XTR 1/2" . I'M THINKING OF BUYING ONE BUT U SHOW MW THAT ONE N THAT'S THE TICKET RIGHT THERE. LET ME SAY I'M FROM PHILA. PA. LOVE YOUR SHOW. YOU'ER THE MEN. GOD BLESS BE SAFE
I guess you didn’t read the instructions on the 24 max. It does have a hand tight mode that makes it nice and a slow down mode that works on reverse. I just bought it 3 days ago. I didn’t want the big one since it was so heavy and we have 3/4" and 1" air impacts at the shop.
I have the old model too, and I'm perfectly happy with it. I bought it on sale a couple of years ago for about half the price shown in this video, and unlike the XTR model, the kit also included a fan equipped fast charger.
The older I get the more I realize that top name brand isn’t always needed. And if you are on a budget then Kobalt is great I have some apart from my flex and Milwaukee
I have the first generation 24v and I think it works great for me as I don't use and abuse mine everyday. If I had to use it daily I'd consider going to the xtr .
Will the XTR battery is still better than ATG & CAT's battery? The two use Graphene batteries. We been using graphene batteries and liked over the lithium batteries.
I picked up the xtr drill driver with the 4Ahr battery last week. Love it so far. Waiting to see if the come out with a cordless brad nailer before i buy in to much
i own both and love them both but the older model comes with a rapid charger and the newer come with a standard charger both work with the older and newer batteries
Watching because I just bought a metabo hpt brushless 18v impact wrench, wanted to see what others were like. Also looking to find cheap impact sockets.
Ridgid came out with a high torque impact too.. Vince maybe you can do some testing to see what torque these high torque wrenches will apply and break away... Usually with the 800lb breakaway you can do anything a mechanic would need but being a pneumatic guy its always a big claim seeing anything but a 400$ ir or nitro cat hitting them numbers
Hey Vince... would love to see a VS video for the dewalt high torque vs ridgid high torque vs kobalt xtr vs milwaukee high torque!... cheers from Canada :)
Been looking at going to a new tool brand for bout a yr but not knowing what to go to. Been leaning toward kobalt but still undecided. I really want a tool line that has a decent radio charger but few have good ones
@VCG Construction Hog ring is also known as a friction ring.
Hog ring means fighting Diablo in chicken speak
I still have no idea WHY it’s called “Hog” ring! cuz hog reffed to a domesticated pig 🐖!! wait.. maybe because the nose shaped as a ring?
A Call From 7 Heavens because that type of retaining ring resembles the split metal ring with beveled points thats pushed through the cartilage of the nose of pigs and locked there to prevent rooting & serve as a means of leading the animal.
🙂
@@InsuranceIsLegalizedRobbery they used to put those rings in pigs noses to keep them from rooting up dirt, you must be a city boy!!LOL!
I own one. That's why I clicked. Wanted to see your take.
I just picked up a bran new one in box for 100$ I think I got a heck of a deal
I just got the xtr circular saw, and its a complete animal! I continually cut 2 sheets of 3/4" birch ply for speaker cabinets and it cuts through 1 1/2" like butter! Very strong saw. Love it! Looks like the impact will be next!
Two years later and it is still $269. While I was at Lowe’s, I checked their website for online deals. Ordered online to pickup at store and the $269 impact came with your option of one free gift; two extra batteries, xtr circular saw or xtr reciprocating saw. Plus another $5 off coupon. Tools are great, free tools are even better!
Love my Kobalt tools both generations are top notch!
Same here man. I actually just gave my milwaukee tools to my father in law for a early birthday present because I got all the new xtr tools and love them. Getting ready to add this impact to my collection. It would be AWESOME if kolbalt would compete with Milwaukee's stubby and gen 3 compact impact wrenches. I'm also going to be adding those to my list. I love kolbalt but I don't discriminate. If the tool does what it needs to when I need it to. I'll buy it. Milwaukee is definitely a quality tool.
How good is it cause it looks like it cannot tight up lug nuts
I had one for work I work at a junkyard and kobalt impact would only get like half the lugs off. Now my Dewalt half inch on the other hand never fails even with extentions on taking torque away. Not hating on the kobalt just from experience the Dewalt has never let me down but for the price I guess it's not too bad
I've had the gen 1 for about a year now and really like it, have no complaints at all but I'm defiantly digging the new model! Might have to look into upgrading!
Unless you need the extra torque, or it's broke, keep your older one.
I have a few kobalt xtr tools, and 24 max they are a great value. The folding light is the best light I have ever used, I love how the impact and hammer drill feel, but I wish their triggers were more responsive in comparison to a Makita set I ended up with due to the recent free battery promotions. And the impact driver while more powerful than Makitas xdt14z is not as controllable nor is the lighting as good on the tool. But for the money, they are great, and I would have thought it was the best thing ever had I not gotten my makita set. Also, their multitool and compact reciprocating saw are fantastic never mind the value. VCG you should definitely review those you will be surprised how they compare if you haven't already.
I have the Makita xdt14z and the Makita xdt11z and I actually like the brushed 11z better. I bought the 14z for the mode that slows down at the end for things like screwing down like metal roofing which it is good for. However, in normal day to day use with wood, I like the 11z. I am building a deck with composite decking and preferred the 11z for the composite boards because the 14z is just to fast in top speed and too slow in second gear. While the T mode did not work out good either because the shavings would get in the way and after clearing them the 14z would start back out in full speed mode causing overdriving. I just have better control with the 11z and the driving speed is fast but not so fast it is hard to control in short burst like the 14z. I also have the OG Kobalt Impact displayed in this video and I am not that impressed with it's power since it struggled a little taking a lug nut off my wife's parent's car. I got it on sale for $169 though but I would prefer to get the Makita equivalent when funding allows. It is good but not for really tough larger bolts and nuts.
The XTR impact driver is a beast, i got a 3/8 adapter and used it pull idler arm bracket bolts that were torqued to 150 ft lbs on a rusty old ford ripped them right out.
Impact w.r.e.n.c.h!! excuse me
Impact wrench...*
@@ItalianoDio- Old post, but Kobalt has an XTR impact driver too, and that's what I think he meant, since it wouldn't be much to brag about for an impact wrench rated at 1200 ft lbs to remove bolts torqued at 150 ft lbs.
The impact driver is rated at 2400 in lbs, which is 200 ft lbs, and when equipped with a socket adapter, it's more than capable of removing bolts torqued at 150 ft pounds. I keep mine in my truck, and use it routinely to remove lug nuts torqued to those specs.
If it says VCG I’m clicking. This is how I spend my free time, watching and liking y’all’s content
I have the regular 24v Kobalt Impact and I love it. The charger that comes with the impact is a fast charger too!
Have that too, but more importantly, it’s a fan-cooled charger that you could hear the fan loudly running! I like the way it’s built, very stiff & durable.
I really like where Kobalt is going. Skil as well.
Same company makes them(im guessing you knew that though) id love to see skil come out with a bunch more 12v stuff give Milwaukee a good run, competition is always good for the consumer.😁
I'm a tow truck driver . And usually 2-3 times per week I got a tire change call for some small cars up to a ford f350 size (i dont touch anything bigger)
In a period of 3 years two kobalt high impact wrenches broke down on me.!!
My body run mobile road assistance/ repair truck .And he using his tools very havy on daily basis.... %90 of his clients is semi trucks. He only using Milwaukee tools. Out of his experience this is only tools which is able to hold up really well to that massive obuse he put them through. And he did try them all , from chip walmart tools to ridgit and makita.
So Wright now I'm looking for a good deal on Milwaukee high impact wrench.
This new line of tools are very impressive! I'm still going with my milwaukee fuel 1/2 impact because I'm in the platform other than that kobalt is a great choice.
Can you plz review The dewalt dcf899 impact wrench
You're tightening the lug nuts in the wrong order. That can cause warping or flexing and some of the nuts can become loose as you keep tightening the other ones. They have to be torqued in a cross pattern.
I just bought the xtr version, at my local Lowe's you got a free 4ah battery with the kit made the choice easy also bought the high pressure inflator.
I have been looking for a impact wrench I was thinking about getting the Milwaukee but I think I might get the xtr, I also got one of you hats it’s super nice! SMASH THE LIKE BUTTON!
Hfhgg Hgjjv Yea I will have to look at the makita! ThNks for the tip 👍
Are you already invested on a battery platform?
Get whatever brand you have batterys for if you dont have any at all get the milwaukee it's a complete monster
Davidson Mott yep dewalt 20 volt max
Most people don’t need 1200ft lbs like the kobalt xtr or 1400ft lbs like the Milwaukee high torque. Most people only need a mid torque impact. I do have multiple Milwaukee and 1 xtr, but I’m a farmer that works on his own equipment. Even working on our own equipment, we only use the heavy high torque’s when the mid torque’s don’t get it done. We have multiple Milwaukee and dewalt mid torque impacts and they’re the “go to”. much lighter, more compact, just more manageable.
Every video that I’ve watched of yours about Kobalt XTR line up definitely sold me on buy a set in the future.
Vince is a damn good sales man, convinced me to buy the skil 12v stuff, very pleased(also have dewalt,porter cable,bosch,ridgid,ryobi and a few off name items all cordless. Yes its kind of addictive. Love me some tools.
So why do I spend my time watching your videos???
Because I get an honest review, honest opinions, honest demonstrations with real world problems and things that we run into out in the field-that’s why! AND most importantly…THANK YOU for putting a JACK STAND under your truck after you jacked it up!!!!!!!!! You’d be surprised the number of videos I see where people just use a hydraulic jack and then get up underneath it. They don’t realize it’s a simple rubber o-ring or rubber cup holding that hydraulic fluid in the cylinder keeping that jack holding their vehicle up in the air. It can fail! It can fail!!!
Most times you don’t get a second chance. Good review, thanks for the video.👍
Just got a xtr circular and it’s kickass but I just purchased the older line a week before these xtr came out
Older tool line
I love this Kobalt XTR 1/2 impact, been using it the last few months. Quick note a 6 amp hr battery will fit in the case without needing the foam insert that comes with the impact. Its not like my Milwaukee 2767 but for the power to price ratio and the warranty I don't think it can be beat. 5yr warranty on the tool and 3 yrs on the battery. To compare harbor freights earthquake 1/2 impact only comes with a 90 day warranty and then you have to buy the extended warranty making the Earthquake significantly higher. Anyway another great video in the books.
A floor Jack on gravel ranks in one of my top 10 most frustrating scenarios.
What about putting thread in a small needle
Quit fuxking around Throw some wood under it. And get it done
haha yeah it moves the vehicle rather than the jack moving
Again I'm sold on this tool.. saving my pennies to cop me one.. I bought a kobalt hammmer drill a few years back I use it a few times with the 2ah batt.. it kick ass!!.. I'm a Rigid man but not for long
I have the previous generation 1/2” impact wrench. Tempted to get the XTR or Milwaukee high torque, but to be honest, working on Jeep suspensions and old rusty bolts on older Jeeps, I haven’t needed more power. And I like that it isn’t so easy to over torque a fastener with it.
Sure. Wish I could afford to get into the XTR KIT. Stay Blessed 💘💞 my Friend !!!!!!!
As a excavation contractor I recommend the xrt to any one that works with heavy equipment/ heavy trucks
Bought the 1/2in XTR impact and got the 3/8in right angle impact for free. Haven't used the right angle yet but the 1/2 is a beast!
I brought the older one a few months before the xtr was released. But I'm not complaining, I really like the older one so I wont be replacing anytime soon.
I clicked on the video because it just came out and I watch every video.
I got the makita high torque impact wrench, witchbthos kolbalt looks to be word of warning on these high torque impact wrenches, the gears can bind and burn out and lock the tool up, i had my makita serviced, the rep said that its quite common in the makitas, i would assume I may apply to other brands as well. But for the extra cash the 3 speed one is the way to go, I use mine daily
Hey Hey Vince, I clicked on because of the KOBALT LINE?!! I'm hoping to get into the Kobalt line as a DIYer. Saving for a Combo kit 🙂☺️😊 l Love the Royal Blue. Thanks again for sharing your thoughts and videos Rodney
I would love to see the same 2 impacts here tested against each other again on something where they struggle. For example, I tried to use the old style today and there was a bolt it would not take out on a semi flywheel. I wonder if the xtr would have taken it out
I work at a junkyard and the kobalt barley gets any lugs off. My Dewalt half inch tho is badass gets everything off that I need even with extentions on taking torque away. Dewalt gang!!!!! Lol
Just got this for Christmas last night and wanted to check out a review.
its a great tool, youre going to love it.
I run makita. But I love tools and knowledge. I like to see other brands battle it out in case I ever need something I don't have. Saves money, time, effort.
Just bought one. Had to drive almost 2 hours away because they were out of stock everywhere and Lowe's wouldn't ship it to me, but I got one.
I got this XTR to compare with Pneumatic AIRCAT 1150. I was really impressed with XTR, I decided I will return Aircat and keep XTR.
I own the old version and yes you can choose the speed its in the trigger, if you pull trigger all the way when you start that will be max speed however pulling the trigger to about half way when starting will give you a lower speed, and as obvious as that may seem it does state this in the instructions
Nobody else put the XTR against the 24V MAX....good job
XTR is great for bigger wheels on heavy vehicles. Our RV lug torque spec is 450 ft lbs. Planning on getting the XTR by Christmas.
Have the old one and like it a lot. I also got it on sale a year ago for 169.00. No question which is a better deal for me!
VCG Construction man i love your show great job showing what these tools can do with your shall I say expert advice. Hands down best on CZcams you guys should get a stand up applaud 👏 great job guys best in class hands down been a sub for a while now since you guys started. I watch every single video you guys put out puts me in a good mood watching you guys since this pandemic hit it killed my BUISNESS been out of work since March and watching you guys makes me feel like I'm on the job!!! Absolutely love it. Unfortunately I had to sell all my tools to pay rent in these hard times. But you guys bring a little extra happiness to this stay at home bs. Be safe and keep up the good work have a blessed day love you guys.....
I’m here looking for the best bang for the buck alternative to milwaukee. I know I know, I’m a milwaukee fan but don’t want to spend too much just to do small repairs on my vehicle. Bigger work gets sent in but I would like to do some myself.
A weird idea hit my head, I’d love to see Vince & Scotty Kilmer review together!! Man, I know Scotty talks about cars n stuff.. but, they would influence each other of their own knowledge/experiences, and people would enjoy the show 😄😄
No amp needed to hear them 😂
I just bought one for $219, also comes with a free angle drill
@vgcconsturction you should try the big craftsman v20 impact wrench
Clicked on it cause I work in the tools part of Rona in Québec and we juste received some of the Kobalt Xtr line. Nice to see it properly tested
Got mine yesterday I’m impressed
I have tons of kobalt tools and what compelled me to visit your video was I'm sick of using a four way. Wanted to see if this lives up to it's standards.... I'll be back after video lol
im sold on them an i found the ompact for 199 as we speak getting rady to go grab it love the videos you guys help so many people
Kobalt is certainly upping their game! very impressed with the tools they have been rolling out. Now they just need to increase their battery selections
I am very surprised by these new XTR tools! They are very impressive!
Awesome video. Man that XTR is a beast 💪
I just bought a dewalt dcf899m1 1/2 impact wrench. I wish there was a comparison vs the kobalt 1/2.
FYI - the Kobalt electric mowers are HALF off right now, but just the push ones at my location. The self propelled are like 15 percent off. $249 for the 80 volt push mower is awesome.
Also at mine. $250 push, $300 for self propelled. Greenworks self propelled $249 push $259, how that makes sense, I don’t know. I’ve been admiring these all summer but my bad experience with kobalt’s warranty department on a string trimmer has me leary. I hate to pass but a don’t need another peice of garbage after 5 minutes of use!
@@matthewpeters8790 I need self propelled because my property is hilly. If the propelled unit was half off I'd bite but it ain't, so I'm gonna pass too. But I like the idea of no gas, oil, carb cleaning, etc.
Is that the "GO" from super smash bros?
😂🤣
It is
Same font and everything too
Bought one today! I was surprised when I went to the shelf! XTR
@VCG Construction the other word for a hog ring on a square drive impact is known as a friction ring
I have both of these, the XTR would NOT break the lug nuts loose on my 93 dodge dually. 5/8 studs with 1 1/8 nuts. Ended up breaking them lose with 3/4 rachet.
Great video
But not a real test for those tools
It will be great seeing dem on a torque test or 18 wheeler stay safe my friends
Picked up a Gen 1 on sale about a year ago for 170.00. Tool/4.0 battery/ charger and bag. Great tool for simple car maintenance. Gen 2 seems awesome but no need to go out and buy it, maybe the 5/6th gen lol
Fantastic bargain.
I wasn’t even there for power tools, but when i saw it, I was like yup I’m gonna take that for that price, Iv been looking for one anyway lol
@@mhviper1987 I don't blame you. I'd probably have bought it even if I already had one. Lol.
I bought this impact wrench a few months ago and can attest to it's quality and power. Top notch for sure. Would love to see this in a TTR
Give props to the XTR cuz that test was good
Just picked up the XTR model for $200 from lowes. What was strange is they had both models for $200.
BROTHER I LOVE WHAT U DID WITH THAT KOLBAT XTR 1/2" . I'M THINKING OF BUYING ONE BUT U SHOW MW THAT ONE N THAT'S THE TICKET RIGHT THERE. LET ME SAY I'M FROM PHILA. PA. LOVE YOUR SHOW. YOU'ER THE MEN. GOD BLESS BE SAFE
Thanks William, we appreciate it and you as well!
I have the old one but man I still buying the new one waiting for black Friday
They're both $199 at Lowes while supplies last. I got the XTR instead. I'm coming from a Mid torque Ryobi.
Ridley in the house!!
I guess you didn’t read the instructions on the 24 max. It does have a hand tight mode that makes it nice and a slow down mode that works on reverse. I just bought it 3 days ago. I didn’t want the big one since it was so heavy and we have 3/4" and 1" air impacts at the shop.
I have the old model too, and I'm perfectly happy with it. I bought it on sale a couple of years ago for about half the price shown in this video, and unlike the XTR model, the kit also included a fan equipped fast charger.
@@chuckd7423the new XTR comes with a charger.
I got that bell on, so ofc I clicked to see what you guys are up to.
The older I get the more I realize that top name brand isn’t always needed. And if you are on a budget then Kobalt is great I have some apart from my flex and Milwaukee
Love the new Kobalt 24v
I just got the XTR 3 pack and I feel they moved upmarket. No lie though, the Fuel stuff is making me jealous.
Love the kobalt tool's! There price too! The angle grinder is nice for light easy use
Thanks man for going out of your way to make this video 👍🏽👍🏽
Purchased 3 tool xtr kit, love it !!
They should make 1/2 inch drive as well and compete with Milwaukee
I clicked on the video because you guys have great content... Keep it up the good work... Can't wait for pipeline 🤙🤙🤙
I have the first generation 24v and I think it works great for me as I don't use and abuse mine everyday. If I had to use it daily I'd consider going to the xtr .
I got the older version for $129 on sale. Could not pass it up at that price. All my other tools are XTR though.
Will the XTR battery is still better than ATG & CAT's battery?
The two use Graphene batteries.
We been using graphene batteries and liked over the lithium batteries.
I picked up the xtr drill driver with the 4Ahr battery last week. Love it so far. Waiting to see if the come out with a cordless brad nailer before i buy in to much
Alright!
iiiiiiiiiiiiiiiiiiiiiiiit's Vince! VCG!
HIT THAT LIKE BUTTON!
Nice informative video Vince. Would like to see more testing of the Metabo hot line of tools
I was compelled to click on the video just to see Vince in shades.
I love your channel thats why
2 people has told me this is better than Milwaukee and that's why I'm here
i own both and love them both but the older model comes with a rapid charger and the newer come with a standard charger both work with the older and newer batteries
I clicked to hear your radio smooth voice, Vince!
Friction ring, BTW.
🤣🤣👍🏻 thanks 802
Awesome video bro! Totally sold me on the kobalt and I subscribed
I clicked cause your always on the cutting edge if new tools!
Watching because I just bought a metabo hpt brushless 18v impact wrench, wanted to see what others were like. Also looking to find cheap impact sockets.
Ridgid came out with a high torque impact too.. Vince maybe you can do some testing to see what torque these high torque wrenches will apply and break away... Usually with the 800lb breakaway you can do anything a mechanic would need but being a pneumatic guy its always a big claim seeing anything but a 400$ ir or nitro cat hitting them numbers
Another great review like always
Looks amazing. Cool review.
The XTR is a beast! Mine beats all the guys at works against all the guys at works snap on air guns!!! For less then 1/3rd the cost
Hey Vince... would love to see a VS video for the dewalt high torque vs ridgid high torque vs kobalt xtr vs milwaukee high torque!... cheers from Canada :)
Good trigger discipline 😊
I bought the older model last black Friday for $139.00. I think it is a win-win depending on what price you can get it for honestly.
At the same time u get what u pay for
Clicked to support, stayed for the content 👍🏾
Been looking at going to a new tool brand for bout a yr but not knowing what to go to. Been leaning toward kobalt but still undecided. I really want a tool line that has a decent radio charger but few have good ones
It was definitely the siren's song of a new VCG Construction video that brought me here.