Cafe Racer Timelapse Build - Yamaha Virago XV750 - Full Timelapse Build
Vložit
- čas přidán 29. 08. 2021
- Here is a timelapse video of 3 & 1/2 months work turning an ugly 1981 Yamaha XV750 into a hell of a lot cooler Custom Cafe Racer Motorcycle! The build was possible with the use of some amazing products from Motogadget, Anti Gravity Batteries, Breakwells Paints, Metzeler Tyres and a whole host of other manufacturers/companies. On top of the custom seat frame sits the custom seat wrapped in Dinaminca suede (a different brand of Alcantara) works so well against the Aston Martin Viridian Green painted fuel tank with the custom subtle tank graphics. The Motogadget M-Unit Blue handles all lighting etc alongisde the Motogadget Motoscope Pro dash, Breakout box, Anitgravity Lithium battery & Rick's electrics regulator rectifier. The Tyres are Metzeler ME888 Marathon with white tyre writing. The front end Forks, wheel & brakes are from a 2004 ZX10R while the yokes are from a 2001 Yamaha R1 & the stem is from Cognito Moto. The headlight is an all in one Dipped/Main beam & indicators unit while the tail light is an all in one side/brake & indicator unit that is frenched into the seat hoop. Custom rear set brackets and rear sets work custom rear brake and gear linkages. The bike was fully stripped down and sandblasted then finished in Sniper Grey Cerakote.
Watch the full build series here:
• Yamaha XV750 Cafe Racer
Caddy 2k Series:
• Caddy 2k Crash Damaged...
Link to my other CZcams Channel with my wife @danandabi:
/ danabi
Want to support the channel?
DAC Industries Hoodies, T-Shirts, Wooly Hats, Snapbacks & Stickers are available to buy from my website:
www.dacind.com
My Instagram Account:
@dan.a.chambers - Auta a dopravní prostředky
By a strange coincidence, 12 mins' is exactly how long I have before I need to turn my vegetables over in the oven, and put the pasta on.
😂 this is the best comment!
This is what CZcams is for
God works in mysterious ways
This is the funniest comment i have seen 😂😂😂😂😂🤣🤣🤣🤣🤣🤣
Funny for me it's ribs in my air fryer
Screams craftsmanship, frank zane asthetics at every angle. Amazing. I want it...🤤
Thank you!
High 5 just for mentioning Frank Zane 😊
I love the fact you have a comfort blanket on your press, just incase it all goes wrong!
One of the most beautiful motorbikes I've ever seen. Perfect in deed.
man i need this vid not in timelapse mode, the feels of how you do it with explaining is much appreciated ♥️ btw nice build!
One of the best built i’ve ever seen. Simple but so beautiful to look at.
Thank you so much bud ❤️
@@DanChambersDAC Thank you sir for sharing your passion.
Very nicely done, superb craftsmanship and meticulously precise attention to detail throughout!
The process will not betray the results, greetings from Indonesia🇮🇩🔥
OMG!!!! I love it!!! never thought that Virago can be transformed into this!!!
❤
That takes real talent. There’s nothing like turning wrenches for yourself. 💯
I loved the transformation, and what a beautiful bike ended up being. You Sir have a serious talent!!
Fabrication looks top notch, nice video. Shaft drive bikes are limited to wheel travel, watch your back.
I rarely comment on videos but what you’ve achieved there is awesome. A work of art. Really enjoyed the series.
Thank you so much for the comment bud I really appreciate it. Glad you enjoyed it.
Really enjoyed the build. Seeing the build in one you forget how much work and expertise went into it… great job Dan you must be really pleased with the finished bike… bring on the Fiesta !!
Thank you bud, Glad you enjoyed it. I forgot how much work went into the build too! Really pleased with it. Will be even more pleased when it is sold!
This was so awesome. Love the transformation, and what those xV bikes can be turned into. The mono rear shock set makes it so clean. Early 80s Suzuki GR650 had a similar set up with lots of potential….
My first ever bike was a GR650.
Й
this is art and engineering, the outcome is a masterpiece. wooooooooow!
Thank you so much bud ❤️ really means a lot!
Artistic expression through motorcycle building is a powerfully beautiful thing. This video is a fine example☆
That’s a art right there, it’s a beautiful bike.
This is by far the one and only motorcycle that looks like my dream motorcycle. It has the looks that I want.
Me too
Thats a sweet bike man! I can't wait to build my first! I love motorcycles, to ride and to fabricate. Not big on Cafe racers but the experience will be awesome!
Cheers bud! I had never turned a bolt on a bike before building this so it was a massive learning curve! Enjoyed it but won’t be building another bike for a while 😂
Very enjoyable series Dan, I really couldn't see how it would turn out or if the colours you choose would work but it's obvious from the results that you had a vision and knew what the bike would look like in the end and it turned out fantastic, nice job mate 👏👏👍
Thank you bud, Glad you enjoyed it! I have to admit once I had chosen them I was worried but it seems to have turned out OK!
@@DanChambersDAC did you lose a lot of gas mileage by lifting your tank? My bike only gets me like 70mi a tank
One of the best vids i've seen on a cafe racer build. KUDOS to you SIR!
wowww im not a bike guy but enjoy seeing someone build projects, and then i saw the MK1 in the background. My absolute dream car
this café racer is one of the coolest I've seen
The motorcycle got such a great engine with great sounds. Your version goes better with that sounds. You made a great looking motorcycle.
Looks great! I bought a low mile XV920 to do the same thing and then life happend. It is awesome to see someone hammer this out fabricating as you go.. Love it.
Let me know if you need another one my 920 is collecting dust.
Oh sweet bud! Is the 920 the chain drive version? I have a very short attention span so need to get things done asap 😂
@@DanChambersDAC My 920 is also a shaft drive like yours.
Thanks for not starting the engine at the end of the video. That free stock music from CZcams was waaay more entertaining than any motorcycle could ever be.
Ahh, If you want to hear the bike run you will have to watch the full series 😉
Another cracking build by yourself Dan can't wait to see the track car all done
Thank you Gary, Really appreciate it. I think the track car is the most excited I have been about a project!
Awesome, I'm blown away by your attention to detail. Your video helped give me ideas I hadn't even considered. OH, I have the same headlight.
Thank you bud!
now THAT'S what I call attention to details, even that little bended plate on that accelerometer stand, you are good my friend
🙏 Thank you bud.
So impresive. Congratulations for the work (ART).
194th
You've done a great job, bike looks fantastic 👍
Thank you bud!
Man that is super clean!!! Awesome craftsmanship!!!
Thank you!
i dont know a single shit about motorcycles but this video is satisfying
Thank you, Glad you enjoyed it.
im starting a project like this myself, just finished stripping down a yamaha xj600, its going to be a learning experience thats for sure
Awesome job.. luved the way it turned out and looks!👌🏿 Less is definitely more!
Thank you bud. I was pretty happy with it!
Great, great transformation and not booring video at all. You could make 2 hours video from this . . . . 💪
Great job mate. Outstanding effort and result!!
Thank you bro 👊
Absolute georgous build guys!
AMAZING transformation, I just landed on the channel and love the content.
amazing! I wish I had the tools and the time:) really great job 👏🏻
the colors work so well together awesome bike
The Yamaha Hipster. It's just like a sportster, but it knows better without any life experience. Lol great build tho brother!
Most underrated comment of the thread
This is how to do anything from a nice motorcycle
Cheers
Amazing build on this bike!
That’s tight my man… fantastic build.
Gotta love a shaft drive, doesn't really look as cool as a chain but man the maintenance is soo much better.
wow. having a sport bike and a classic bike, and then combining it into one. wow.😮😮😮
Great fab work! Such a good looking bike 🙌👌
Damn! what a gorgeous piece of art!
Beautiful work!
Gratulation to that Verry Nice Bike. And Perfect Work Chapeau!👍
Beautiful man. You'll have 1 million views in about a week or two.
Thank you! I really hope so!
Fantastic job,took my breath away 👋👋
I can watch these all day xD
Wow, you are super talented mate.
Wow, amazing work and good taste!!
Built not bought, nice work!
Job well done! Bike looks amazing
You are gifted dude, awesome watch.
FYI, I want that bike, lol
Awesome rebuild.
Fantastic Build!!!!!
Fantastic transformation 👌🏼
Thank you bud.
...la moto est merveilleuse, quelle beauté!!!
I sketched out a bike idea I had. It was just inspiration based, not off of any models specifically and it is so close to this it’s crazy. Beautiful bike that had also boosted my confidence lol
Nice bud! Good luck with your build!!
Beautiful work
Genial trabajo 👏👏👏
really nice to watch, if i only hat the time, money and place for something like this, thanks for sharing
Very nice work and a great video!!!
Titanical job and a very inspiring one.
Brutal, son unos artistas! 👏🏻👏🏻🔥
That is so cool nice work
Uuuuuh that golf also!!! Sick!
Beautiful build.
What a beautiful bike. Nice one, bud!
Thank you John, Turned out OK didn't it!
That's hell of a build
Now thats creativity
Awsome job the bike looks absolutely fabulous !
Thank you
Услышать бы его звук! Отличная работа! От мото глаз не оторвать!
Спасибо за просмотр!
Stunning bike. Well done sir
Thank you very much!
I love that green!
Love it. You got a new subscriber buddy
Very good to see that kind of commitment in a bike ¡congratulatios!!!
Thank you!
I subscribed your channel at that moment when I saw you made the seat nuts friendly.
Man, that's sick!
Nice job, i enjoy it very mucho, thanks
Bike turned out mint 👌🏼
Thank you bud!
Came out super 👌 nice
Very nice bike. I like the paint and Motogadget Dashboard.
Thank you bud! I am so pleased with how it has turned out. The Motogadget stuff is quality 👌
amazing work!
Nice to see the build complete in a quick fashion.
Alot of builders drag it on for a year and it looks like a half eaten cheese sarnie at the end ..
Well done .
When can I have a ride ?
crazy isn't it! I forgot how much work went into it until I watched this back. I did the same thing with the Caddy too! I have a VERY short attention span (The Golf 😂) I still haven't ridden it yet!
Did a really good job on that I've got to get me something to work on so I can ride it next summer
Thank you bud! Yeah I need to get a cheap bike to ride next year! This one will be for sale soon 👀
Dammmmmm that is sick. Impressive skills 👏👏
Great work
Odd that this video popped up on my list, I have a 1100 Virago sitting in the shop that needs some attention! You’ve done a great job on this one, looks really nice! Thanks!
Glad that CZcams's Algorithm has picked the video up! Awesome! Go for it. the 100 if chain drive instead of shaft drive?
@@DanChambersDAC …. Unfortunately, it’s a shaft drive. I removed the dual Hitachi carbs and put on a single Mikuni TM40. Still needs a little fine tuning, but should be good. The bike sat for 10 years or more, abandoned in a garage. Looks almost new at only 9k miles. Also, we put true dual exhaust on it. Need to finish it!
Turned out so well 👍👏👏
Thank you bud.
Very very nice looking bike. Much better than current similar style bikes
First of all let's all bow for those technician engineers.. because of them we r in this generation...
i like how the looks of motorcycle plate in your country. the build are awesome by the way
Amazing job! I want one!