TTS 360whp supercharged Hayabusa - full kit laid out and explained
Vložit
- čas přidán 6. 09. 2024
- We've just put together one of our Gen 2 Hayabusa supercharger kits ready to send out to a lucky customer. So we thought we'd run through all of the components and show you what's what.
This package is available for all models of Hayabusa, including the latest 2021-on Gen 3!
ORDER ONLINE:
bit.ly/3olB5bI
Please note: there is a 6-week lead time on all kits
Check out our website:
www.tts-performance.co.uk
Call: +44 (0) 1327 858212
Email: sales@tts-performance.co.uk
FOLLOW US
/ ttsperformancetuning
/ ttsperformance
Hi Richard, still the proud owner of a stage 2 tts 2008 rocket 3 ,what is the reasoning why you didn't go with a cogged belt on the rocket 3 kit and a ribbed belt was used instead it has been a on goin issue with belt slip at areas above 5000 rpm on occasion unfortunately sometimes loosing a pound or 2 of boost in the upper range, any suggestions or could I invest some time into a cogged gear set and belt or is it even worth the effort for a daily cruiser,lol,thank you Richard for building these kits for us to play.
That year Rotrex won’t survive with a tooth belt it will rip the thread out of the drive plate inside. A good step would be for us to make 7 rib pulleys and belt.
See from the video Richard uses the 560-8MX-20, GATES, POWERGRIP GTX Metric Timing Belt.
Maybe try the German 560-8M-20-HL, Optibelt, OMEGA HL High Performance Timing Belt. Same price at €33
Hi..What would the total cost be including the installation.I have a 2014 Hayabusa.Thanks.
Nice video, , I have a Gen 2 can I use my own Exhaust ( Brocks penta carbon) full Exhaust.?
Yes
Hi TTS..,can I order the same kit for my ZX14R....and do you do only Busa-is it more complex to boost a Kwaka?
We are going to build a similar kit. But need to get a bike first.
So proud of you guys. Can't wait to order cbr1000rr plenum to start my project
Do you still need one
I'm thinking to order one for my Gen 1 Hayabusa. Is there a thicker Headgasket included or needed? Is there a Basemap for PCV available or is a ECU Flash necessary?
Thanks a lot and Greetings from Germany
Hi. Depends on the year Gen 1. Pcv with ign module. Is an easy option. Woolich racing do software for later Gen 1’s. I can supply gaskets and head stud set at extra cost. Please email richard@tts-performance.co.uk for an in depth reply.
Unbelievable Work👊
So stoked to get mine and experience MAJOR HP on my Gen 2!!
Thanks so much for the super quick email replies and info Richard, you made the decision to purchase your kit and the experience so far a fantastic one!
I’ll let you know when it arrives…..
William
I didn’t see the fuel tank perforated trim panel the layout there Richard?
Can you show a GEN 1 kit please Thank you
It will be in the box
Kit shipped today with mesh👍 away on vacation now until the 2nd
@@TTSPerformance awesome!!!!! Thanks so much Richard, I hope you have a fantastic vacation and I’ll let you know via email when the kit arrives safely!
I will be installing it in approximately 3-4 weeks when a mate of mine gets freed up help me install it!
This will give me time to get a few of the parts powder coated as we discussed (probably the outside belt cover and any other exposed brackets/plates to give that “stealthy” appearance (you described it best “Stealthy”!!!).
As far as the maps/tune goes, are they supplied on a thumb drive or disc? I don’t have the software to load up the maps into the ECU but I plan on setting an appointment w Chris “Moore Mafia” Moore in Taylors South Carolina to load up the ecu tune/map and get her tweaked for the absolute maximum amount of rear wheel /break HP!!
Are these available in the us?
Damn i don't know if i should try to put a turbo or a supercharger on my VFR 750 now...
Luvvvvvly bit of kit
Hi im wondering if this would be compatible with a suzuki "expresso" (hayabusa engine swapped suzuki cappuccino" im still trying to figure out if it would still fit
I have many different busa kits. Check the website
Hi do you plan to make one for Gen3?
We already are. Check. Www.TTS-performance.co.uk
How much weight does this add to the bike and what's the weight of the super busa just curious?
Can you show a GEN 1 kit Thanks
We will be shipping one later next week I will try and put a photo up on our Facebook. I’m away until 2nd August
Looks almost the same as Gen 2 but you get a set of 750cc injectors.
Is the gen 3 video far away can’t wait to see how it goes
Big launch on 20 th August.
@@TTSPerformance awesome thanks mate can’t wait
I'd like to see you make some yamaha mt09😁
We make one.
Is this kit there also for the gsxr 1100?
Sorry 😞
How much??
How much for the kit 2008 busa gen 2
£4400. Order from www.TTS- performance.co.uk