Remote Start Installation by Mypushcart.com

Sdílet
Vložit
  • čas přidán 10. 09. 2024
  • mypushcart.com offers a complete line of remote start kits including: Add On, 1-Button, 1-Button 2 Ways, Keyless Entry, and 2 Way Remote Start Systems. We flash our bypass modules to work on specific vehicle makes and models.
    shop.mypushcar...

Komentáře • 50

  • @stevenmustang8148
    @stevenmustang8148 Před 2 lety +1

    OMG...just baught this for my 2006 Chry Town & Country.Im ASE master tech and a level 4 chry tech of 30 yrs......info is really poor cant even find info to return it

  • @SkullFrog2
    @SkullFrog2 Před 4 lety +1

    Try positive tap products man. Quick and easy to use like scotch locks or t taps whatever you wanna call them and they do nowhere near the damage to to wire and sheathing material. I solder all of my stuff but I've had good luck with the position taps.

  • @Tyler_Koehn
    @Tyler_Koehn Před 2 lety +1

    this is plug and play??? wtf

  • @radiocontrolrs
    @radiocontrolrs Před rokem

    I tried to install on my 2013 Honda Civic but when I remote start, after a few seconds car looks the door and the engine turns off

  • @bryantphillips6986
    @bryantphillips6986 Před 2 lety

    I have this already installed in my car but when I brought the car I did not come with the remote start key fob where can I purchase the remote start key fob ? Thanks

  • @petehookup
    @petehookup Před 4 lety +1

    You didn’t show the program process

  • @frank_texas7400
    @frank_texas7400 Před 6 lety +4

    Now why i am watching this, i just realized that i have to engage my clutch to start my car

    • @Xmech-id6ol
      @Xmech-id6ol Před 6 lety

      wire it in on the power side of the clutch switch, opposite to the brake switch.

    • @patrickkrenz515
      @patrickkrenz515 Před 5 lety +1

      Google remote start clutch pedal bypass. It'll work, but never forget to leave the car in neutral with the the parking brake on.

  • @egjfamily7671
    @egjfamily7671 Před 3 lety

    I mean if I can install the remote start on my Citroen C5 aircross 2019 model

  • @j_moravia29
    @j_moravia29 Před 6 lety +1

    Well i m at the shop right I want install my remote start but my car 2011 push button engine also guy told my car it’s 2010 can’t find wire to push button start I want it’s the what’s difference about

  • @darrinholstine5273
    @darrinholstine5273 Před 7 lety +4

    I didn't get a tip sheet. here can I get this

  • @DD-rt3yu
    @DD-rt3yu Před 5 lety +2

    I downloaded the installation instructions for my car from your side and it has a couple of errors in the cables to connect your cables within your own devices and also the cable color does not match with my car so I am returning everything... too bad

    • @henrison
      @henrison Před 5 lety

      that's exactly whats happening to me on my dads sienna

    • @studioxps72
      @studioxps72 Před 4 lety +1

      @@henrison I go by pin out not colors vehicles change to much.

    • @ItAintMeBabe99
      @ItAintMeBabe99 Před 3 lety

      Wow, that’s one hell of a long sentence !

  • @JamesSmith-zk7ck
    @JamesSmith-zk7ck Před 6 lety +2

    Do you have one that works with a 2016 ford expedition?

  • @mrbryanwalker
    @mrbryanwalker Před 5 lety +2

    Sending this back. Your competition has harnesses you can plug in to simply put the module in-line... limiting the soldering and connections to just a few. This set up has you tearing into multiple wiring harnesses, searching for the right wire to connect to. I can’t afford to disable my vehicle due to one missed connection or fault in the module. I’m sending this product back.

    • @henrison
      @henrison Před 5 lety +1

      i feel you ... i been fighting with my dads Toyota for 3 days now the downloadable sheet and all info don't help in anything

    • @joelballou9744
      @joelballou9744 Před 4 lety

      what product did you end up using. I have been trying to find the easiest install.

    • @billy2423
      @billy2423 Před 4 lety

      I am on my 4th day. Plug & Play harness my butt and no weekend support at all. Should have been a very easy install on my 2004 Silverado as it is a basic work truck, no pwr door locks etc. I got everything working per the LED Light and veh lights but still won't start. I have watched warmcarnow on youtube and others and per those it should start. Pd $180 for a prewired that does not work. Plus it is not MPC but Crimestopper brand. Better off going to their site, but they also do not have weekend support!!!!! UPDATE: Got it to start one time ONLY. Now no go. BTW, I am a electrician plus been a DIYer working on veh for over 40+ yrs. UPDATE: 5th day, still no start, everything shows that it should. Now here is the kicker, start truck with key, click remote key button, pull key from Ing and veh stays running. Can stop either with remote or brake. But remote still won't start veh. Support is far in between. Called about 4 times but never returned call. Emails are 2+ hours in replies or the next day.

    • @trin929
      @trin929 Před 2 lety

      @@billy2423 I am sure you have found the solution by now, but I would like to know the answer. was the problem a poor contact with the scotch lock on the starter wire?

    • @billy2423
      @billy2423 Před 2 lety

      @@trin929 They sent me a new INT-SL+ and everything worked great for a good while, then would not start again. Had me check data wiring hookup. Rewired and works fine now, but after I added a small amount electronics solder to that connection

  • @alphansodaley4959
    @alphansodaley4959 Před 2 lety

    Can I install remote start on a push button start vehicle?

  • @TrailBusterBrute1
    @TrailBusterBrute1 Před 8 lety +10

    There has to be a better way than T taps or even solder. I've never come across a T tap that didn't cut the conductors. Solder isn't always possible, either. Every ignition switch has a plug. Whey can't there be a T adapter for these things to go between the male and female plug of the ignition switch. A bit like the adapters for trailer harnesses under the truck. That's an accessory I'd want to buy.

    • @iantebo6377
      @iantebo6377 Před 6 lety

      you arent using the proper size taps then. t taps are the best way and the only way when you have to crank out 6-8 starters in a day

    • @scientist100
      @scientist100 Před 5 lety

      There is and it is called plug & play.

    • @timlong1462
      @timlong1462 Před 2 lety

      I know you commented this a long time ago, but now they have some thing called a T harness that does exactly what you said. Just unplug the entire ignition plug, and the immobilizer plug and they basically have a harness that goes in between the male and Female plugs. I came here hoping to find instructions for my kit, and this style of installation would be insanely complicated compared to what they have now.

  • @mirooovuujjj7918
    @mirooovuujjj7918 Před 4 lety

    Do you have one that works with a Mazda CX-5 SUV 2015?

  • @angelvillegas7481
    @angelvillegas7481 Před 6 lety

    What's the link of this actually product model I also have a Civic 2012 and I want to purchase this product

  • @oodles86
    @oodles86 Před 2 lety

    No relays needed?

  • @Cristian-pz9kn
    @Cristian-pz9kn Před 3 lety

    Why does that eco smart honda sound like a jet at startup

  • @rileyen4608
    @rileyen4608 Před 3 lety

    What about your relay connections???

  • @egjfamily7671
    @egjfamily7671 Před 3 lety

    Can do that on Citroen C5 aircross?

  • @tonyrollin402
    @tonyrollin402 Před 5 lety

    Can your systems do smartphone starters too?

  • @0mxme1
    @0mxme1 Před 5 lety

    Does this void my cars warranty? Cause I know certain modifications vehicles warranty I drive a 2018 Hyundai Tucson.

    • @studioxps72
      @studioxps72 Před 4 lety +1

      Some car dealers tell vehicle owners that installing an aftermarket part in the vehicle will void the warranty, but that is not true. The Magnuson-Moss Warranty Act prohibits a company from voiding a warranty or denying coverage under the warranty because the owner used or installed an aftermarket part.

  • @fasalbro8557
    @fasalbro8557 Před 2 lety

    what is your website, please?

  • @urhellamad
    @urhellamad Před 6 lety +1

    how does it perform? distance?

  • @truenorthmuskoka9077
    @truenorthmuskoka9077 Před 4 lety

    This seems like it should be done by a professional. Too many wires to deal with. I think I’ll stick with the plug and play type by Start-X.

  • @dom19867
    @dom19867 Před 5 lety

    Do you have any video for rav4 2015 how to install the remote control.
    Some one can help me with that please

    • @MrArc4
      @MrArc4 Před 5 lety

      dom19867 you mean Remote Starter? If so i can help I install remote starters on TOYOTA cars

    • @studioxps72
      @studioxps72 Před 5 lety

      Watch "2013-2015 Toyota RAV4 OEM Remote Activated Plug and Play Remote Start with Smart Phone Control" on CZcams
      czcams.com/video/9oZXu4UBxts/video.html

  • @Adcrismr
    @Adcrismr Před 4 lety

    You don’t have for Kias

  • @khatibahmad3172
    @khatibahmad3172 Před 5 lety +1

    Can u please send me your tip chart by mail or whatsapp??

  • @reddeerrebelrc6674
    @reddeerrebelrc6674 Před 3 lety +2

    Never ever use any type of connectors. Always strip , solder and tape.

  • @pradeepsubba2859
    @pradeepsubba2859 Před 7 lety +1

    Can this be fit on 2013-2015 RAV4?