The thing is overhead tanks are usually located at third or 4th floor, so connecting the sensor and rest of the circuit is not practical, so consider adding nrf wireless modules to make it complete. Willbe waiting for v2.
Very intressting project. Is it possible to use this project to check the hight in meters for a well? with the demissions of 2.55 meter wide, and 8.2 meters deep? thank you~
Hello mam, i am also trying to make same kind of project but in my project inust want to use relay, ultrasonic and nodemcu and i have to turn off the motor when the bucket is full can you give any suggestion to me how to do it
In the real world, closed water tanks generate a lot of water vapor that results in condensation (water droplets) forming on the ultrasonic sensor. This results in incorrect sensor readings. Please think about a way to prevent condensation on the sensor.
The thing is overhead tanks are usually located at third or 4th floor, so connecting the sensor and rest of the circuit is not practical, so consider adding nrf wireless modules to make it complete. Willbe waiting for v2.
Yes this can be done. Perfect example. I can try this in future for sure
Brother it's possible ultrasonic sensor wire only 4 so using CCTV cable is chep so connected to that 4 wire board in your home
i'm facing issues in arduino ide code/libraries! what should I do?
Very intressting project. Is it possible to use this project to check the hight in meters for a well? with the demissions of 2.55 meter wide, and 8.2 meters deep? thank you~
Water level showing unstable, level flactuate unexpactedly, do you have any solution?
Hey .. is it turns the pump on when the water level is low?
I did it in 2019 with Raspberry Pi and Pi4j as a subtask in one of my project..
Nice project
Another amazing video 😍😍 thank you so much for sharing such a useful video ❤
hello i have made the whole project as shown but my relay remains high for both conditions please help
The sensor does not work properly, we had ordered the sensor, the quality is poor .
Instead of Push Button, how can I add touch switch (ttp223) to circuit? any diagram for that?
can we use large size display ie; 4.3" size
Can I get deta on LCD when wifi is not available ?
Great Video.
I am interested to build the same to track 3 tanks.
Nice project 😮
Can I connect 9 v batter instead of 240v AC
Thank u 🎉
Can i use Arduino UNO insted of ESP8266
the code to apply the node Mcu but the ofline
Hello mam, i am also trying to make same kind of project but in my project inust want to use relay, ultrasonic and nodemcu and i have to turn off the motor when the bucket is full can you give any suggestion to me how to do it
And also i have to use blynk to check the water level and control the motor
@@kamleshgorade5699 see if the blink some automation triggers so that can trigger a event to turn off the motor using relay or look for mqtt protocol
In the real world, closed water tanks generate a lot of water vapor that results in condensation (water droplets) forming on the ultrasonic sensor. This results in incorrect sensor readings. Please think about a way to prevent condensation on the sensor.
Can we use this sensor for larger tank(30 feet deep).
The maximum distance it can measure is 600cm.
Code error madam .
Error compiling for board nodemcu 1.0 (esp-12Emodule) showing how to slow this problem madam please tel me
disconnect the mcu from the circuit and then add code
❤❤❤
👍 😮😮😮
It's " How to Iot " 😂
our bhi teji se dikhao na.......😐😡😤
❤❤❤❤