Shes got some good speed going ..you running the slipper clutch in this? It sounds pretty loose . Itll help that first half of the run out if ya can get it tightened up some . That body is sharp bro and I like the wheels as well .
Thank you, yes I have a slipper in the car and yes it needs to be adjusted , i had stripped out the spur and set new one close to spec then keep tightening it up as I make passes . Some people tighten all the way down then start backing off . It has been a challenge for sure from a dr-10 kit to getting it to go straight and fast I’m definitely not fast like the top dogs but it’s getting there slowly it has a 3.5 turn so I know it should be faster been playing with different pinions and esc timings . ..
@@rcskullcrusherchallenge1797 all good bro that's the way to do it . I'm kinda in the same boat with a mambax and their 7700kv 4 pole motor . My best on gnss is 2.54 at 55mph with 22/87 gearing . Most people are tuning with the radios now I believe
@@justinqualls6292 Yes it’s all good test test and retest lol. Have you tried like a 75/25 or somewhere close to that. I’ve read that’s what them castle motor like. I got the monster mamba x in mine think the 6s one are you in the cheat mode also? Im still learning this all
@@rcskullcrusherchallenge1797 iv got the 1/10rh scale mambax it's not as powerful as the 1/8th scale esc but yes I'm in cheat mode 45 degrees spread 6700 to 60000 rpm .iv tried 81 /22 and it was slower .. iv been 57mph with the current 22/87
@@justinqualls6292 I originally had the mamba x I think it’s 120amp vs monster x at 160 amp but like I said I’m still learning. It’s rainy season here in wa state so hit and miss now for testing. Good luck bro it’s definitely a big learning curve getting it there
Shes got some good speed going ..you running the slipper clutch in this? It sounds pretty loose . Itll help that first half of the run out if ya can get it tightened up some . That body is sharp bro and I like the wheels as well .
Thank you, yes I have a slipper in the car and yes it needs to be adjusted , i had stripped out the spur and set new one close to spec then keep tightening it up as I make passes . Some people tighten all the way down then start backing off . It has been a challenge for sure from a dr-10 kit to getting it to go straight and fast I’m definitely not fast like the top dogs but it’s getting there slowly it has a 3.5 turn so I know it should be faster been playing with different pinions and esc timings . ..
@@rcskullcrusherchallenge1797 all good bro that's the way to do it . I'm kinda in the same boat with a mambax and their 7700kv 4 pole motor . My best on gnss is 2.54 at 55mph with 22/87 gearing . Most people are tuning with the radios now I believe
@@justinqualls6292 Yes it’s all good test test and retest lol. Have you tried like a 75/25 or somewhere close to that. I’ve read that’s what them castle motor like. I got the monster mamba x in mine think the 6s one are you in the cheat mode also? Im still learning this all
@@rcskullcrusherchallenge1797 iv got the 1/10rh scale mambax it's not as powerful as the 1/8th scale esc but yes I'm in cheat mode 45 degrees spread 6700 to 60000 rpm .iv tried 81 /22 and it was slower .. iv been 57mph with the current 22/87
@@justinqualls6292 I originally had the mamba x I think it’s 120amp vs monster x at 160 amp but like I said I’m still learning. It’s rainy season here in wa state so hit and miss now for testing. Good luck bro it’s definitely a big learning curve getting it there