Sir Mara ak question ha? Ak product ka sort size kiska upar dipand korta ha? N Ak part ka waight 200gm hoga to uska sort size kitna hoga ? Machine tonnage - 200 T
How to change cushion? In my machine I am using ppcp material.and the given cushion is 15 mm. But, I couldn't change it!! As a result burn mark is coming
sir main 1 problem face kar raha hoon pc material main lens k part main transpairency zyada a rahi jis ki waja say part kalochi ki taraf chala jata hai muje transpairency + brightnes chahye plz koi hal batain
Please watch again man i have only set an example i haven't told that u have to set it exactly holding time always depend on your product material and shot capacity of machine.
Sir sometimes when we open the mould then injection starts again and sometime we observe flash and in next shot we observe short moulding what will be the reason behind
yes < i got the same problem. then i checked my cushion history. If was changing drastically due to which i was getting short and flash on every alterate cycle. The main problem was that the check ring of the machine was damage.
Low cusion mens...मतलब की आप जो प्रोडक्ट् बना रहे हो ,उसमें मेट्रियल पुरा फ्लो कर रहा है जो की कम है तो हमें मैटरियल को ओर बढ़ाना चाहिए उदाहरण: के लिए हमने सेट की 180 mm और हमे चाहिए 185 ,य 190
But brother we are talking in terms of machine and material so to explain in better way i have to use the terms thats why i use foam to make it more clear ..no bhejo apna messenger p lagta nhi purana wala ya whatsapp karo hume no ho to
Wonderful!!
Sir @plastotech Injection molding pe videos bnane k liye ap nhi jante aapne kitna bda kaam kiya hai hmari madad ki hai apko dil se dhanyavaad 🙏
Good
Very knowledgeable video thank you sir
Sir Mara ak question ha?
Ak product ka sort size kiska upar dipand korta ha? N
Ak part ka waight 200gm hoga to uska sort size kitna hoga ?
Machine tonnage - 200 T
All valve and servo pump and induction motor pump ka video chaiye Sir
Apse request hai ki ek video feed zone me bane abs, pc ka lumps kaise nikale is banye .
Hi,
Can you please tell me about the best substitute material of PC? For Vacuum metallized automotive parts applications.
boht achi video .in formative
Nice sir
For pvc moulding how much should be cusion.
Bahut achhe se samjhaya h sir ji
1 no.
Sir thermoset material ke trubbal shooeting ke bare mai vedio banao ..🙏🙏
Sir nice acha samjate hai aap
Nice
Thnxx dear
Thank you sir nice
What is the use of nitrogen cylinder in injection molding
thenx sir 1 1 topic par video banane ke liye
Wlcom bro u will get many more ..@keep sharing our videos
Nice video sir thanks
Thanks
Hi
Can you do a video on doe on injection molding machine
V good dear.
Thnxx dear
Dear Sir injection moulding machine ka electrical system bar me kuch vedio upload kijiye plz
Sure soon u will get all
Sir, how to variation cushion control by pom material..
Thanks sir black spot ki prblm solve hogi cushion km krne se
How to change cushion? In my machine I am using ppcp material.and the given cushion is 15 mm. But, I couldn't change it!! As a result burn mark is coming
Reduce the amount of charging of material yoir cushion will be reduced.
Long gate on preform. Please address is
Thanks sir
Wlcom dear
Sir transducer setting ke bare mein batao
Hello sir pvc material Jab injection molding mein chalta hai Jab machine band Karni Hoti Hai To Uske barrel Mein Koi Aur material dalna padta hai
What is l/d ratio
sir main 1 problem face kar raha hoon pc material main lens k part main transpairency zyada a rahi jis ki waja say part kalochi ki taraf chala jata hai muje transpairency + brightnes chahye plz koi hal batain
Cushion end
Very nice
Thnxx bro
How could you say that 5 mm has used for holding time.
How did u confirmed.
Please watch again man i have only set an example i haven't told that u have to set it exactly holding time always depend on your product material and shot capacity of machine.
Sir sometimes when we open the mould then injection starts again and sometime we observe flash and in next shot we observe short moulding what will be the reason behind
yes < i got the same problem. then i checked my cushion history. If was changing drastically due to which i was getting short and flash on every alterate cycle. The main problem was that the check ring of the machine was damage.
Nice bro
Thnxx dear
Holding & packing kya hota h
Video banauga mai uspe stay tuned on plastotech mil jayega answer don't worry man
Low cusion mens...मतलब की आप जो प्रोडक्ट् बना रहे हो ,उसमें मेट्रियल पुरा फ्लो कर रहा है जो की कम है तो हमें मैटरियल को ओर बढ़ाना चाहिए उदाहरण: के लिए हमने सेट की 180 mm और हमे चाहिए 185 ,य 190
Why caution variation..
Sir ek practical video bana dete to achha hota
Nice video Sir.injection machine me kuch bhi presser nahi aata to kya karneka yesa video me dikhao na
I haven't got u bro..??
Make vedio on hydraulic power pack unit
Surely i will whenever i have time stay tuned to channel
please make English video bro.
Sir mere machine me back pressure bhaout slow aata hai finish product bahout time lagta hai
how can i set cushion .plz tell me .
Sir Haitian machine hai injection karne ke baad . Injection cushion error likha so hone lagta hai . Kaise thik kare sir
Sir Blown film extrusion ke bare me bataiye step by step,aapka like and subscribe dono hoga hamare Ander me ,MOPE ka Jara student h
Sir ya kese pta legaga ke 1 component ko bnana me Kitna mm material legaga
Es pr 1 video Bnao Sir
Depends on the weight of the product. Its called conversion which depends on the diameter of the screw you are using.
Hello Sir...How i can reach you? I mean how i can contact you. Thanks
Sir Vincent robot programming and
Magnetic mould clamping and clamping pr video bhai pleas
Brother "Cushion over" error kesy Khatam hoga,
Again again Cushion over alarm dy raha mera injection...
Plzz reply????????????
What is relation between cushion and screw damage
Already clearance in machine
Pls correct
Piece kaise bhrte h
Oil Page Kia hota ha
Sir die se related questions bataye
Satta charging time decrease and increse
Cushion kese nikale GA
Material po 120mm cusion 45mmhold components sink short moulding probelms
Sir low weight ageya usko kese weight badhanahe...
Thoda sa holding time badha do
Im avinash Titre Mumbai
Need course in injection moulding machine
Cusion 45mmhold zerokase karta yeal
Sliver stick control
process settings bataiye
Cusion position zero kasi karta yeal
Sir I am new student me apse direct jurna chata hu muche kya karna hoga
Cotion aur swich ek hi hai kya
Difference hai but 2no ek dusre se related hai aage video aayega apna switch over ka to aur detail me smjh jaoge
And please subscribe our channel to be stay tuned with channel
Sir Shirikej Kam Kyse kare
Plz share the link trouble shooting video
Cushiin se screw damaze ka koi relation nahi hota screw 0 material position tak inject karta h
Black Spot Kam Kyse kare
OUR APP -Hey! I found this amazing app with the best video courses. www.plastotech.in yaha se sabkuch seekhe is course se
कुसन मे कभी कम Matrialबचता है दुसरे सोट मे ज्यादा Matrial बचता है तो इस का कारण क्या है
आपके ring plunger या beral की id में फरक आ गया हैं।
Cushion Pillow hi hai...
Haha
Shi keh rho ho cushion pillow hi hai wahi to bola maine kyun..Doubt hai tumhe..??
But brother we are talking in terms of machine and material so to explain in better way i have to use the terms thats why i use foam to make it more clear ..no bhejo apna messenger p lagta nhi purana wala ya whatsapp karo hume no ho to
Shrinkage pes
In English plz
Sure brother soon
Sir notes Chahiye mai likhna chahta hu
Karan sir 🙏 aap ka mo no kya hai aap se baat karna hai pl
Suckback ku dete he
Hey! I found this amazing app with the best video courses. www.plastotech.in
Bhai ap ki mukamal video kha sa nikalo plz bta dena
Playlist me jaae sab milenge wahi
@@PLASTOTECH thanks bhai jan