Video není dostupné.
Omlouváme se.
Club Car A Frame Bushings
Vložit
- čas přidán 15. 11. 2021
- Hello if you have a club car Precident this may help you. Every time I bring one in for work I inspect everything especially the suspension. With the wheels off the ground ( easy for me as I have a hoist ) give the front end a good shake. There is no sense in doing an alignment if there is any play. Over the years these bushings wear out , and create a lot of play. They are very easy to replace. The long bolt that I always put on the grinder which really helps when I re-install it. If you have an a frame that has been bent always put a new clevis bracket on.
"You have to drop the steering box". This is key mystery to getting the control arm removed from the vehicle.
it un bolts very easy and just let it hang down 1 to 2 minutes
Ahh, but getting the Sleeve to line up is the fun part. Any secrets for that?
Golf course mechanic here aswell. Usually wait to press the second bushing in. Put the pin through then c clamp the second busing over the pin when it’s easier to manage. Not always easy. But it’s been the way I’ve managed