Designing 15 feet Speed Boat in Autocad PT.2

#SpeedBoatDesign #BoatAutocad #Autocad3D
Learn how to model a speed boat and apply materials.
This is just for practice, not intended for manufacturing. I made up the dimensions.
DISCLAIMER
The dimensions provided are intended for information and practice purposes only. No warranty or representation as to the completeness or accuracy of the dimension of said materials is made.
Music: www.bensound.com" or "Royalty Free Music from Bensound

[@AC3DCad]

For part 1, pls click this link czcams.com/video/RfFV1NhIoIk/video.html

[@johnpatel5530]

Hi AC,
Another great lesson series. However, I have a nagging question, viz. some of the dimensions shown on the reference drawing don’t match what you draw. Case in point, at about 6:46 you stretch the 50.04 base line to ensure proper intersection with the curved (deck outline) profile line that was offset by 10.82; the eventual geometry must be closed ready for the push-pull; I get all that. The dimension shown on the refence drawing is 50.04, but after stretch, it is 50.08 by my reckoning. I thought the reference drawing and subsequent dimensions are made AFTER the drawing is completed.

[@agungsudarsono254]

Mantap (great)

[@aartyxo]

3:16 when jhoining all the lines to 1 spline the corners edges get curved not making proper end points. what do i do

[@AC3DCad]

just use "join" command

[@Vasukatibvishu]

There is some error regards after isolate object and offset...
to offset an object, all points in the object must be located in the same plane.

[@AC3DCad]

:) pls watch my other videos and thanks for subscribing

[@AC3DCad]

czcams.com/users/AC3DCadvideos

[@Vasukatibvishu]

@@AC3DCad ok but what about my problem?

[@AC3DCad]

​@@Vasukatibvishu bring your drawing to top view. Go to "view" panel , click the drop-down arrow, and select top view or you can go to view control at the top left corner and select top.

[@andrasteazeftachristian3060]

Hello this file boat please 🙏