This was the fix I needed. Tried a few other adjustments first because I wanted to avoid taking out the plate under the seat but nothing worked until I used your suggestion.
Thanks for the information. I adjusted mine by moving the two nuts there under the hood. It seems to shift just fine for now, but now I know the rest of the solution under the seat.
Outstanding video!! I had problem that at times forward gear would not completely set and gears growled and more or less "popped" into gear. This video did the trick! I was able to adjust the linkage and have not had a problem since! Thanks so much for helping this non-mechanic fix the problem...
I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does it seems to be holding back until it starts rolling along then it rides good. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?
Wouldn't that mess you up on going in reverse I was thinking about tithing that ball screw because it seems it just would help if you could go a touch father as far as the shifter goes because the frame stops it so if we do this to fix the forward won't we start to loose are reverse
Thanks for the video. It helped me to get my UT400 in drive but now it won't shift into reverse. It's like the cable is to long, it will go one way or the other but not both. Do you have any ideas on how to fix that? Thanks
I had the same problem. I did the same adjustment as in the video except, instead of setting it in F for the adjustment, I set it in R and it works great.
@@neiding10and it goes in both forward and reverse? Mine currently goes into foward fine but pops out of reverse. So would you do this but in reverse instead and it’ll still go into forward?
Tractor supply is running a sale on these for 6999. Is it worth it? I just need something small around the farm that my daughter can take to the nieghbors and the river been using small Toyota puck up bit considering one of these. Thanks for reading extra thanks for opinion 😂
This was the fix I needed. Tried a few other adjustments first because I wanted to avoid taking out the plate under the seat but nothing worked until I used your suggestion.
Thankyou. Saved me hours of guessing.
First third party shop that actually touch these.
Thanks for the information. I adjusted mine by moving the two nuts there under the hood. It seems to shift just fine for now, but now I know the rest of the solution under the seat.
Outstanding video!! I had problem that at times forward gear would not completely set and gears growled and more or less "popped" into gear. This video did the trick! I was able to adjust the linkage and have not had a problem since! Thanks so much for helping this non-mechanic fix the problem...
thank you so much, you made this simple.....
We will be uploading another video this weekend. Coleman's updated shift lever alteration.
Thanks for making the video, New subscriber
What makes the signal lights work on the Coleman ut 400
My unit will quite often pop out of reverse. Will this correct that issue?
I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does it seems to be holding back until it starts rolling along then it rides good. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?
Wouldn't that mess you up on going in reverse I was thinking about tithing that ball screw because it seems it just would help if you could go a touch father as far as the shifter goes because the frame stops it so if we do this to fix the forward won't we start to loose are reverse
Thank you.
Thanks for the video. It helped me to get my UT400 in drive but now it won't shift into reverse. It's like the cable is to long, it will go one way or the other but not both. Do you have any ideas on how to fix that? Thanks
I had the same problem. I did the same adjustment as in the video except, instead of setting it in F for the adjustment, I set it in R and it works great.
@@neiding10and it goes in both forward and reverse? Mine currently goes into foward fine but pops out of reverse. So would you do this but in reverse instead and it’ll still go into forward?
Can you do one on frontend alinement? My 400 pulls left.
Tractor supply is running a sale on these for 6999. Is it worth it? I just need something small around the farm that my daughter can take to the nieghbors and the river been using small Toyota puck up bit considering one of these. Thanks for reading extra thanks for opinion 😂
They are a pretty decent machine, and being on sale makes them even better. There's not much on them that isn't easily fixed if something does break.
Where is your business located? I have a Coleman that may need some work done on it. Thanks!
Located in Olathe, KS
What size wrench are used on the shifter?
22mm on the big adjusting nuts. 10mm on the not that goes on the shifter shaft.