Old Model Cordless Angle Grinder Restoration | Hitachi G 18DSL
Vložit
- čas přidán 1. 03. 2021
- This an old model cordless angle grinder that I bought it from Japan recycle shop price 15$ without battery and charger. I bought new battery case and battery cells from china.
*Cordless Angle Grinder
- Company Hitachi Koki
- Model G18DSL
- Voltage 18 V
- Rated speed 9100/min
- Wheel (outer dia. × thickness × hole dia.) 115 × 6 × 22.23 mm
- Wheel (peripheral speed) 80 m/s
- Rechargeable battery BSL1830: Li-ion 18 V (5.0 Ah, 10 cells)
- Weight 1.8 kg
*Charger
Model UC18YRSL
Charging voltage 14.4 V 18 V
Weight 0.6 kg
*Label text
100mm コードレスディスクグラインダ
日立工機 G 18DSL
日立工機 DC 18V 9100min-1
トイシ 100 x 6 x 15 mm
72m/s{4,300m/min}
⚠警告
●ご使用前に収扱説明書を必ずよくお読みください。
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show - Jak na to + styl
Проверять на работоспособность без аккумулятора. А потом разобрать. Гениально👍
I had a lot of old pipes and rebar to cut up and from what I read czcams.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Great and diverse skills! Liked seeing the demonstration and troubleshooting.
Samsung SDI - these are pretty good cells, I owe a few tools powered by them
Yes, it is.
Nice with high drain cells. I Think you should also use pure Nickel strip and then your battery builds Will be 👌
@victor bruun Yes, I will, thank you for the tips!
Too much grease.. the gear will get hot and motor will work hard cutting trough the grease continuously
Great job, excellent video as usual, my friend. It is a very good thing you noticed the grinder was rotating the wrong way (clockwise). Using it like that could make the spindle nut loosen and spin the disc right off. Take care!
Another good video, I always look forward to them.
Perfect renovation . Really very precise work 👍😉
Did anyone notice the key fell out of its slot when the crown gear was pushed down into place must have notice as it works fine nice job :-)
Yes 11:52 exactly.
@@diabolo3506 ñgyj
Não mostrou ele colocando de novo 🤣🤣🤣🤣
@@agustingonzalo4867 জ
same
Красава!!! Спасибо за видео!!!
quality tool to not vibrate off the table great job at showing that, less vibration converts to less fatigue on the tool as well as the user.
Great restoration!
Estupenda restauracion de esta amoladora angular, inalámbrica Hitachi G 18DSL, respetos y saludos desde Venezuela💯💯👍👍🤘🤘
Lear plus practice is knowledge indeed - I often watch these instructive videos - I subscribed!
Amazing work! 😍
Awesome job as always! I noticed this vid was mostly at 'normal' speed, which is outside the norm for your vids, but I actually really enjoyed it that way! Very methodical and relaxing.
Nice restoration like it
Yes, pink is a lovely color for men's toys. LOL Nice job.
It is unbelievable how much patience you have,I am interested in purchasing refurbished tools from you
Watching at 4k was so awesome 👌
Perfect for cutting any kind of handcuffs in like 3 to 5 seconds 👍
This is back when tools were tools. I really enjoy your Hitachi, Makita, and old Nicad DeWalt drill rebuilds. I like Makita a lot but I still use my old Dewalt 18 volt Nicad drill from the late 90’s it runs great. I’ve had to replace the factory batteries a few times but I keep using factory batteries they seem to be the best, unless I’ve over looked some batteries. I grown attached to the drill and should of just bought new stuff but I will run my old Dewalt until I die.
la pieza metalica pequeña que va en cabezal de giro se salio ademas faltaron partes por poner 11:56 aprox.
عمل رائع شكرا لك اخي
Thanks 👍👍
Awesome sir
Very nice
I liked it so much
Thanks for liking
Good job, specially the battery
Neat, clear, didactic, quality, I like that 👏⭐
Glad you like it!
Out of all these dozens of power tool restoration videos I've watched, I don't think I've ever seen a bearing held in with screws like that.
This is my first time to see a bearing is hold tight by a screw too
It ain't coming loose quickly that a plus
nice رائع
バターナイフの当たる音がすごい好き
Good job! I like it!
13:05 After fitting again all the parts-
Gear Show: Everything is looking OK.
If I do the same thing-
Me: Where these extra two screws came from? 😂
So, you don't need them. 😂
@@Kamidashi77 😂😂
love the continuity check, bark bark, LOL.
Great work! 👍👍
Thank you! 👍
The same high quality as always! Keep up the good work!
Much appreciated!
@@gear_show what software you use to create those labels stickers ?
Pure works👍
So a very restoration drill cutter and angle glider
Good Restoration brother 👍
What a pleasure to watch. Tont
Bravo belle restauration
When the lock nut spun off I knew he had the motor spinning the wrong way! I've done the same on a grinder rebuild lol
Wao amazing...
Hitachi tools always had the Nicelodeon Aesthetic long before everyone else did it.
Great work
best angle grinder!
Nice job
Mechanically still new, only very dirty from use. The plastic fantastic retains oil stains very easily.
At 18:30, the direction of rotation is reversed, it's dangerous cause of blade may fall off during operation. Glad to see you corrected it.
Yesss uploading...
First electro-meter that barks instead of beeps on connection.
Excellent video my big support
Big thanks
Very interesting
Nota 10 parabéns
Gear show logo on the battery sticker! Nice touch.
Amazing
spectacular
He packs the gear housing with a lot of grease which is a good thing. Most tools now are greased with grease you can barely feel but they say it works as good. I don’t really buy it as much because my older older tools have lasted a lot longer, I replace brushes yearly or sooner if need.
The old Hitachi gear was the best money could buy. Then they went on to make some over complicated stuff. I’ve still got Hitachi going back 30+ years. Their airless nail gun was a fail. They really didn’t look at what working carpenters needed. I had one for a few days then went back to Paslode.
nice work
Nice Work
I love it
Good videos tutorial next time boss ferfec the best videos you restoration
I think you put to much gear grease in gear housing and it will go out or your gear housing will get hot fast...
Hey bro nice video
Hey, thanks
Good job mash'Allah
Naic work
The sound of the angle grinder... you can here it in the suburbs anywhere in Hungary... Every single day maybe except for Christmas
Why?
@@asu-5748 the fuck do I know. They are always cutting or grinding some crap
This is your best video so far!!! Keep up the great work!
Nice video !!
Thanks for the visit
すごいです😺
@Фанат Сяоми
我会报告
4:14 this container looks like the top cover of a phonograph
Because it is.
Always thought this was the dust cover of a record player.
Great job mr.gear and the next time mission find a impact wrench! Good luck👍.
Once again Excellent work👍👍👍. Thanks for sharing
잠이안올때 이영상을보면 잠이듭니다 백색소음👍🏻👍🏻
Ericsson 1970 vintage rotary dial telephone restoration
In Vietnam, the model hitachi priced at 35$ is very expensive.
In Poland this model cost 100$, all set with battery and charger cost 490$ is it very expensive
@@slawek12935 The same Price in Germany. Really Expensive.
Good job🇮🇳👍👍 Kuki
bro, where can i buy those battery packs? excellent as usual
Много смазки положил в редуктор.
Как гаечку пафосно открутил. Просто дрожь по всему телу пробежала.
muy bien
Hello. How do you manage to reproduce the technical labels of the devices you restore so perfectly? Thank you for your reply.
Как говорит некто Евгений: мало смазки!
По лайкам вижу что и наши смотрят японца. Рад этому. Вы о Белгороде?
@@mr.makson8050 Да, фраза уже стала крылатой.
@@Aleksey-Norilsk недавно узнал о нем, смотрю, сам в свои 19 решил собирать на мастерскую но для этого надо ♂️Three hundred bucks ♂️ и как минимум болгарка, танк, паркетка, сварочный инвертор а также ударный шурик. Буду брать все на акуме (кроме сварки хотя таковая в продаже имеется 😄). А вы кстати как забрёли на этот канал? Я вот наверное из-за my mechanics или TysyTube restoration.
о ком это ?
@@Depytat96 Евгений Белгород. Забей в ютубе, в кругах DIYщиков весьма знаменитый дядька.
Did you buy dedicated battery case with correct board? Ive noticed in your previous builds you usually use different boards and you cant use dedicated charger or this time you bought correct batteries. Can you explain us a difference between those builds. I was always wondering why you cant use standard charger. Nice work
Mantap
well done. great job on all your videos. but I am pretty sure your location is japan because I am and all tools you used just can find in japan :))
Great, but did you clear lacquer the black part of the grip???
A very good camera work. Need patience and determination to place camera at each sequence of work.
Great video for a one man show.
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
🌻🌸💮🌼🏵️🌺🌾🌷🌹
Wonderful work! The electric tools and grinding wheel have Japanese printings and others have simplified Chinese printings. Where do you live???
I guess this what people do to keep busy during covid 😏😏😏
1st time saw a power tools that is 'purple' in colour😂
Butuh
Mantabbb
Will you have many tools and old things to restore?
Это крышка от проигрывателя винила? 🤣
12:16 I think it is a excesive grease, the excesive grease produces overheat
WOW
I have a very similar hitachi grinder but it's only 14,4 v. I've just repacked the batteries with new cells, but won't start anymore. Check almost everything : rotor good, start button good, brushes good, wires good. I think the aluminum module block could be the problem. What do you think?
Great job! How can i ask you somenthing privately?!
Onboard BMS from the battery kit has no cell balance function, so a separate balance module should be installed. It costs about 1 dollar but makes a long and happy battery life.
Great video. What did you use to clean the plastic?
Some Kind Of Detergent, Maybe Look Up "Rust Cleaner" On Amazon
Как только гайка с шайбой уехали, сразу было понятно...
Não foi você que fez esse vídeo, o seu tem muito mais qualidade