Sanding walls and ceilings properly after filling, drawing acrylic joints and spraying paint

Sdílet
Vložit
  • čas přidán 9. 06. 2024
  • Table of contents ##
    0:00 preview
    0:28 sand walls and ceilings with the giraffe
    3:22 Sanding walls and ceilings by hand
    5:14 Protect windows and doors with masking
    8:52 Primer Spray walls and ceilings
    11:14 Draw inside corners and window joints with acrylic
    13:59 Spray paint on the walls and ceiling
    What tools did I use:
    -------------------------------------------------- -------------
    👉 Long neck sander giraffe
    👉 Construction lights SYSLITE DUO-Plus
    www.festool.de/produkte/bewei...
    👉 SuperFinish 23 Plus (AL) TempSpray
    www.wagner-group.com/en/craft...
    👉 Cartridge gun COX
    www.i-prema.de/kartuschenpress pistol-cox/?variantId=5277&gclid=CjwKCAjwoduRBhA4EiwACL5RP9WLXcnYNkNdAbM1wx5MWa8fIL8jiKrET1fFh1PpFCyaB_ESk9qU6hoC6tsQAvD_BwE
    Used material:
    -----------------------------------
    👉 Velcro sanding discs 225mm multi-hole yellow ceiling sander drywall giraffe grain 120
    👉 3M sanding roll 235U, 115mm x 50m, P120 #04391
    www.shop-sks.com/3m-schleifro...
    👉 Kip 3808 Washi Tape
    farben-profi.de/products/wash...
    👉 Kip 332 Fine Masking Masker
    farben-profi.de/products/kip3...
    👉 CapaSol RapidGrund 2.5 liters
    www.leisten-and-more.de/capas...
    👉 Sista F130 Premium Acrylic, White, 300 ml
    color24.de/Dichtstoffe/Sista-...
    👉 Caparol Indeko plus 12.5 liters
    www.farbkurier.de/Caparol-Ind...
  • Jak na to + styl

Komentáře • 14

  • @HomeBuildSolution
    @HomeBuildSolution Před 2 lety +1

    Schöne Schleifmaschine 👍😁

  • @DerAltePixel
    @DerAltePixel Před 2 lety

    Solide Arbeit 💪🏼 Lasse mal ein Like da wie immer 🤗

  • @noonamenoname9577
    @noonamenoname9577 Před 2 lety

    Mehr video bitte super

  • @user-es9bf9nz1v
    @user-es9bf9nz1v Před 2 lety

    Браво.

  • @leca3
    @leca3 Před 2 lety +1

    Me llama la atencion que no uses la planex 2 de Festool, dado que siempre usas las mejores herramientas; parece que hay un problema con tu aspirado.

  • @kaiseraziz3962
    @kaiseraziz3962 Před 2 lety +1

    💯💯👍👍😘😘

  • @huseyinozcan9884
    @huseyinozcan9884 Před 2 lety

    teşekkürler video için

  • @will-at4339
    @will-at4339 Před 2 lety

    Sollten Acrylfugen immer bzw. an alle. Ecken gezogen werden, bevor der Farbanstrich folgt?

    • @DerAltePixel
      @DerAltePixel Před 2 lety +1

      Ja, damit die Acrylfuge den selben Farbton wie der Anstrich hat, Am besten immer fuge ziehen dann direkt drüber beschichten 👌🏼.

  • @ivpu2465
    @ivpu2465 Před 2 lety

    No back roling of the paint?

  • @gorod_24
    @gorod_24 Před 2 lety

    Герметик от трещин в углах?

  • @MrBhv3011
    @MrBhv3011 Před 2 lety

    No mask?

  • @user-ug8dq1es6w
    @user-ug8dq1es6w Před 2 lety

    Пустая трата времени .