S680 repairs & 9530 transmission fun. (It's NOT good!)
Vložit
- čas přidán 29. 08. 2024
- Got back from Minnesota and I’m getting started on the S680 repairs again. We also remove the transmission from the 9530 to see how bad the gear damage is. #johndeere #s680 #9530
www.sloans.com
www.sloanex.com
www.sloans.com/careers - Auta a dopravní prostředky
Ray Charles Welded that with his feet. I nearly choked on my coffee. Mick, Northern Ireland 🤣🤣🤣👍🍻
I am a new subscriber to the channel and have viewed a few of your videos. I really like your work ethic, attention to detail and client focus. You are truly a craftsman, professional and role model to your trade...thank you for the opportunity to watch you at work!
Never heard of a high speed planter,
Absolutely amazing , this isn’t your granddads farm , bit of advice, start getting all the old mechanical stuff you can , this new stuff won’t last, no one can work on it and it’s too expensive, that being said , you are an excellent technician
Hello! Your videos are instructive and fun. Greetings from Portugal.
Thanks ZK for another great video. Was most interesting and enjoyable.
Combine maintenance now days is so demanding in terms of looking at the high wear items. Your combine work today was great attention to detail work and client focused items. Learned a lot.
The tractor transmission-wow. Seeing one pulled was great. Hat off to the young man that got it ready to pull. Lots of do’s and don’t there. That thing is huge and heavy. ZK appreciate your focus on repair or go remann. Never seen one apart. You attention to detail on the gear and shaft damage made most interesting decision point. Fully understand you going with a remann transmission instead of repairing with a big bill in the end. Huge piece to work on.
About it for now. Your patience with these repairs is great. My compliments to you. Step at a time and easy does it always wins the repair. Enjoy your channel very much.
You take care and be safe.
Looking forward to the next video.
Thanks for everything.
The Iowa farm boy.
Steve.
Really enjoyed the video. Your knowledge of and skill to work on these complicated monster machines is fantastic. Would love to have a small percentage of your ability. Looking forward to your next video.
Thanks!
Those magnetic trays are so nice. I have half a dozen different sizes stuck on the side of my toolbox. Hell, you can mount them upside down and all your bolts will still stay put. And for a few dollars each, money well spent. I don't wrench on farm equipment but basically mechanics are mechanics the world over. Your techniques and processes are world class. You young up and coming motorheads can learn a lot from a guy like this. I been doing it 40 years and I do!
I watched Warren over at "Western Truck and Tractor Repair" rebuild one of these 3500 pound beasts about a year ago. Every bearing is pressed on making it very labor intensive. He did a great job and taught us everything about the 18-Speed Funk Powershift Transmission.
Thanks for another great video Zeth!!! Take care, God bless!
OMG I have so much respect for you guys. You ever get tired of having to pull 100 things off just to get to the one part that failed? That would make me run off into the sunset kicking & screaming. My luck would be I'd forget how to put it back together after waiting for parts. Hat off to ya!
Not tired at all of watching. Love it
From the UK. Replacing tin work, fuel tanks, castings etc probably makes economic sense in labour terms, but component repair if possible - welding at the least, seems much less wasteful. Cracks can be stopped with welding expertise, though wear cannot be. Tractors seem to be integrated with so much “nice to have” crap that maintaining them has become a hugely expensive nightmare. Bet half of it could be dispensed with.
I certainly don’t wish bad luck on anyone, but I really enjoy the field service calls and the field rescues. Hope to see some this spring, you make them super interesting!
ZK.
Thank you for the walk along.
Take care and be safe.😊
This combines maintenance list reminds me of the maintenance on the helicopter I fly…they’re both maintenance hogs..so many moving parts leads to so many life limited parts..great video.
There is one big difference though... if a part fails on the combine it's probably not going to kill you...lol
@@MFCSTUDIOS you’re correct, lots of training!
Thanks for sharing more Great content Zeth, as always keep up the great work.
Zeth great content as always. Enjoy you sharing your knowledge. Looks like things went pretty well. Keep the action coming, definitely look you up at the next one. Stay safe!!
Just subscribed i like the way you explain the process of repairing things. It really helps when I have a repair to make. Your attention to detail is great.
Another great teaching video! I for one really appreciate your thorough approach to your repairs. For instance, on the clean grain elevator, not everyone would've taken the time to remove that half link. I've seen technicians who would've been quite ok with letting that adjustment slide because it was "within spec" even though it could've been better. Great job! Your approach is very similar to how I do things. Very refreshing!
We just rebuilt a countershaft HD trans at trade school and its great to see an example of one that has bad gears etc for reference.
Welcome back to the shop! Another awesome video!
I admire, look up to you, am in awe of you and Love your videos.
All of that to say… STOP THAT ANOINTING MUSIC.
That is just me, others may love it.
Either way it won’t stop me from watching and learning from you.
It always interesting watching your video. I always learn something. Thank you for sharing
Another excellent video. You should give Kroil penetrating oil a try. Best stuff around. I am an aircraft mechanic and that is the king in my shop. :)
And I quote, "looks like Ray Charles welded it with his feet." OMW how funny!
I learned 2 things, 1)the name of push nut, 2)didn’t know they made a squeeze tube. Thanks
As always it was educational but also intriguing to see how John Deere builds their equipment and what you as a technician must know. I can see why you are a master technician. How expensive is a remanned transmission in that tractor without labor costs?
$$$65.000.oo or higher
Thanks for another cool episode.
And Millennial farmer is working on the latest on Fertilizer Banding and advanced techniques for farming.
Amigo Matt, muy buen video y muy buenos equipos los que reparas.... Te sigo desde el Valle del Yaqui en Sonora, Mexico..... Ya mero empiezan las trillas de Trigo.... Las primeras casi siempre se "arrancan" pasando Semana Santa. Cordiales desde Sonora, Mexico.
You could invite Andy from farming fixing and fabricating down to your shop for a visit sometime.
Do you ever watch him?
His channel is excellent. ZK and Farming Fixing and Fabricating are the best ag channels in my opinion.
@@Shade_Tree_Mechanic agree totally
Yes I’ve watched his channel. Great guy
@@ZKMasterTech oh nice
Well done zeth lots of hard work coming up for sure.sam
Great job young man,
Viewed 3-26-22 from down state Illinois Trans is toast, cost to rebuild out of site vs installing a reman which is same as like new.
Great awesome video zeth , was great videos with millennial farmer , I learned lots about the planter , how was vacation? Hope it was great , lots of fun back to work , very sick 9530 that needs a dentist 🦷, that s680 is a never ending money pit , a lot of things wrong with it
Thank you glad you enjoyed them. I had a good vacation before spring hits.
Great one Zeth!
"Looks like Ray Charles weldet it with his feet" Now that's a good one!
Greetings to you and everyone, a very wonderful and amazing job. Can you send files for the maintenance of this type of tractors, maintenance files, spare parts and manual service
Hay Zeth buddy! I never tire of watching you get the green stuff fixed up. I loved the Ray Charles gag, it's one I use myself too.
Ouch on the tranny eh? that's gonna hurt someone's pocket big style. Why would teeth fail like that?
Dave.
I appreciate your work. The chain adjustment system is half-assed. Surely John Deere can do better!
I have to believe if it's for sale, it's a value sale for any farmer knowing it's been gone through thoroughly. Thanks
Another great and informative vid!
A little brake Kleen wouldn’t hurt around that final drive input shaft
So THAT's who does King of the Hill voice!
Excellent video as ever Zeth, I'm starting to wonder if everything on that S680 was knackered? (This is a British technical term meaning worn out, broken etc.)
Love these videoes.wonder what did all the carnage on that transmission!
probably original build done wrong.
Tremendous videos, curious why you don't clean any surfaces on the combine, I am sure there is a good explanation.
Greetings from South Africa i like yr videos great jop like to see more
Fun fact about cracks if you drill the end out it stops the crack from continuing its done often on small aircrafts
The metal is fatigued. A weld increases stress. Know when to repair, know when to replace. 9/10 times a guy never finds the true end of the crack because they don't utilize proper inspection techniques.
@@ShainAndrews weld increases stress how do you think the part was made glue 🤣🤣🤣🤣
@@jwhitley101whitleyfarms9 Nobody takes you seriously with emojis.
Thanks for sharing!👍
Somebody was actually thinking when they put that slot in the side of the machine for the auger flighting to come through. That looked like a bird nest sitting on that transmission when you pulled it out. How many hours on that tractor? What kind of warranty does a re manufactured trans carry?
I don’t remember the hours off hand. Trans has a 2 year warranty.
Hi ZK master tech, we had similar noise coming from transmission on my 9560R but oil is very clean and no metal at all. What could it be? Maybe scavenger pump? Cheers for the good videos you posting 👌
Master Tech, maybe I missed this, but if I haven't can you write on the video why you4 fixing this machine. For instance, is it a trade in your working on, a customer's, this does several things. It's a selling tool for the Company you work for. People are more apt to buy a machine if they know it's been fixed. If it's not a trade in it helps me understand wear and tear on the equipment, and knowing when it goes back to the customer, it'll be ready for harvest!
Well if you go back to the first video i made on this combine, I rescued it from the customers field and brought it back to the shop and it’s all customer repairs. Combine is going back to the customer.
I made a playlist called s680 hydraulic nightmare and all the videos are there.
Keep up the good work and great content!!
Do you have any merch?!
zk-mastertech.myspreadshop.com
Good day from Ontario Good video. I just sub Thanks
Those valve posts for the feeder house are 2 parts (you can just pull the lower half off beneath the threads) and have internal seals that with age turn to brittle plastics which crumble and crack so the valve leaks. I have had some experience with those same valves and Hydra Force magnets on the hydraulic leveling system on older Ecolog 560D forestry harvesters..
Also, how often do rodent passengers come along with the machines in to have work done?
Haven't seen if you have any previous videos of that 9530, but was there a reason why all the gears got damaged in that transmission? Or is it a design defect?
Hello! Just a curious question. What is the difference between a remanufactured and a rebuilt transmission? I understand that you have to replace all the damaged stuff in the transmission you are working on but what have been done to the reman transmission? Is that a part from a tractor that had some other issues? Thanks for a great show! It is always fun to look at professionals greetings from sweden!
Zeth, Love the videos!! Isnt this the same machine with the blow up hydro? Will you be able to give us the overall cost of this complete job when you are done?
Yes it is. No i don’t give out repair costs.
How do you determine lock collar installation direction? I noticed on the CG auger the boot end was opposite of shaft rotation, and on the sensor end it was with rotation. Thanks.
Rule of thumb is opposite of shaft rotation but i don’t think it really matters that much on a low rpm shaft. I’ve done it both ways and I’ve never had a lock collar come off. I’ve put on thousands. As long as you have a good lock onto the cam of the bearing and the set screw is tight, it won’t come off unless the inner race of the bearing breaks.
Why does my 7R 350 in Farming Simulator 22 pull left?
Also, how can I juice up my XUV865M to go faster than 31 MPH?
PS if that divider on the auger frequently breaks off, why replace it with another divider? Why not just break that bottom of the divider off and mail it back to JD engineers, along with an evaluation of their job performance? Feedback is key, how will they get better not knowing of their failures?
Now the customer has to pay for a new boot that, per your assessment, has a divider that will probably fail....again. Looks like a manufacturing warranty item. nothing the operator or owner could have done to prevent the designed to fail part.
Old boy Patrick might need to switch to suspenders
What causes the damage to the transmission in these big machines?
No matter what length your videos are, they're always too short for me :)
What kind of torque is needed to destroy a 3800 lb.transmission?
Why wouldn't you just weld a new plate in the boot rather then just bolting a new part ont there? Seems a bit like John Deere expensive part change policy rather then fixing something.
Wow that's very interesting Zeth. We just got done with rebuilding a tranny on a 360 timber jack and we're starting on a tranny on a 540G fun Fun right
Good video!!
Lo saludo y lo respeto como tecnico,mas en Juan Venado ,emplean una logica unica ,tal que un mecanico comun le dificulta mucho etender
Excellent
Great vid
Was the reman transmission a John Deere product or a third party?
Just got my TUBE GRIP dispenser - at amazzon. Thanks ZK
@m1mdunne game changer!
The transmission had a bad day! Did one tooth somewhere come off by chance and the rest of the damage was caused by it and then other parts feeding through the other gears?
Yes most likely
what did the bill total up to on this job ? cheaper than trading for a new machine im sure but im guessing its huge
What would have caused the transmission damage?
Great video
What do you feel caused the the gears in that transmission to fail and how many hours on it?
17:42 You called the sealant "combine sealant". Is that a special sealant, or just a generic term for a silicon sealant?
No you can literally buy john deere combine sealant.
@@ZKMasterTech Thank you very much
Hi Sir ZK can you help me please on my JD 9620R as it always comeout the ECM 001.101.02 "Crankcase pressure sensor fault" warning and its already replace the crankcase airfilter and sensor. What is other possible causes.thank you and more power
Either you actually have too much crankcase pressure or the wiring is bad.
Looks like you're turning the 9530 into an autonomous tractor.
What's better for the wallet IVT or PowerQuad?
Do you work for Deere on paycheck or do you work for your own. Somebody with your experience should work for his own as mechanic. But what i have understood is that it is not allowed to work on a Deere if you want to maintain your garantee. Some farmers had brought it to the court they wanted the right to fix their own tractors
👍
Why not put the 690 boot on if it’s an upgrade and you are replacing it anyways?
Because it would bog the s680 down because it doesn’t have the same hp.
What brand of air hammer are you using?
Snap on
una pasada con un cepillo no vendria mal
What model tractor was that at the end?
9530
Lol your fork lifts could do with side shift lol make your life a lot easier
How many hours on that 9530 tranny?
Where can I find that tool at 18:00?
Valco Cincinnati 71006 Tube-Grip 2.5" Industrial Size Dispenser www.amazon.com/dp/B007IQ4XWK/ref=cm_sw_r_cp_api_i_XV78HYW0Y9GRMEAGBSQD
Go to Valco Cincinnati -they sell different types of sealants and the tube squeezer, and it works great !
Thanks!
😎😁😎
Considering how much those machines cost, you'dthink they'd hire better welders...
Mine.homie