In this video we recovered the gold from 4450 pcs optocouplers and 1500 pcs power transistors, using the lead bath method. #goldrecovery #gold #goldrefining #owltech
Another good one OWL!! 10/10 for metallurgy and chemistry. 10/10 for production and content. I am even getting to like your music. Keep up the great work!!
Why are ceramics able to go into the crucible right away and the plastic ICs had to be incinerated first? I have no experience with processing material like this besides for watching your videos. Just thinking about I'm guessing the plastic would melt into one piece fucking everything up, but that's only a guess. Have a good week and be safe
Great video! I assume these transistors where all T03's? And that you cut them open with an angle grinder. And only use the die and the bondwire of it, is dat correct? And do you perhaps know the total weight of the 1500 transistors?
Здравствуйте! ЛАЙК вам ✌️🤗. Скажите пожалуйста шо за порошок СМБ? И где он переминается! И скажите он пры осаждения золота тянит другие металлы? Спасибо большое 😉😁
Na2S2O5 - sodium metabisulfite - SMB - пиросульфит натрия при осаждения золото тянит МПГ, поетому если они присутствуют в растворе должен применяться другие редукторы - нитрит натрия, щавелевая кислота...
I don't use the smelting technique to make the dore often but I am curious do you lose any gold to the slag with the sodium hydroxide at high temp? also how do you dispose of the slag? i'd assume it is like cupels and absorbed some lead? or does the mass amount of carbon absorption keep all metals from oxidizing?
Gold could be lost trough mechanical enclosure in the slag when the slag is not viscous enough, sodium hydroxide helps with slag thinning. I don't dispose of the slag, it can be remelted over and over again, or it could be converted to metal, with reducers.
Heya ! What a great result again ! It's still too cold here to start recovery season and i feel impatient to begin. People can't imagine the time we spend on finding and preparing the ore... A question : Is it a home made crucible your are using in that vid ? Prices of all needed component to work are getting higher and higher as inflation grows... Do you feel the same dream as precious metal's prices will explode this year ? Whish you the Best. GodBless you.
Сова фантастический результат! Лайк за великолепную работу! Интересно за счет чего такой выход? Транзисторы обычно 30мг это с количества 45г,22г с микрух это 5 мг в одной,всегда считал что в таких 2мг.
Super nice👍how can i get rid off paladium from gold solution dont have dmg or formic acid ? Need help the solution has gold and paladium an a bit off silver
@@Detalius Пока не пробовал, но уверен, что будет работать как с оптронами, так и с процессорами, завтра жду приезда партии 10 кг мостов и сниму процесс.
I tried this method today i added 3kg lead and 50 gram silver for 3kg gold contain material finally i got 500 grms melted lead I have tested in computer machine it shows 21k gold present in this lead metal Now how to remove lead from this melted metal before dissolve in nitric Can you explain pls
de-NOxing is the process of removing the free nitric acid from the solution, some people are using urea, some evaporate three times with HCl, some are using formic acid, I prefer sulphamic acid as it concerts the free nitric acid acid to sulphuric, which precipitates lead as lead sulphate if any is present. If you have an active oxidant in your solution and you don't deNOx the gold you precipitate will go back in solution
The best of your work is in the way you improvise tools, equipment and some containers.
Here I also make with what I have on hand.
A hug.
Another good one OWL!! 10/10 for metallurgy and chemistry. 10/10 for production and content. I am even getting to like your music. Keep up the great work!!
Exelent!
Thanks!
Hello Mr Owl.
I enjoy this clip 🙂
Thank you from Norway 🌹
Glad you enjoyed it!
Brilliant! Cheers for the effort guys! Can’t wait for the next one
Thanks for watching mate, many more to come!
You're name sounds Welsh
Just imagine how much precious metals are put into the ground every year because people just throw shit away at dumps, such a shame
Thats why I recycle 😁
Bonjour
comme toujours un plaisir de suivre les vidéos
vas me falloir le visionné plusieurs fois pour tout comprendre 👌
Fantastic result and video! 🌟 🌟 🌟 🌟 🌟 👍
Thank you! Cheers!
Always good to see a video from you, hope you're doing well
Отличная работа, простенько и со вкусом 👍👍👍😁 и выход приятный 💪 наконец то понял почему азотная кислота концетрированная а не разбавленная...
Работает быстрее, и потом получаю кристаллы нитрат серебра покажу на следующий ролик
@@OwlTech333 серебро закупоросится,и всё будет супер
Результат порадовал👍👍👍
Мне тоже :)
Why are ceramics able to go into the crucible right away and the plastic ICs had to be incinerated first? I have no experience with processing material like this besides for watching your videos. Just thinking about I'm guessing the plastic would melt into one piece fucking everything up, but that's only a guess. Have a good week and be safe
that's a good guess :) I wont be able to see if all plastic is gone which will lead to much longer holding times
Nice job, love seeing the shinny :-) 👍👍
The was realy cool to watch. I Enjoyed it and gave it a 👍 Is that really worth it to reclaim the gold, as in the cost of time and chemicals needed?
Absolutely
Can You explain how you made the forg burner is it gas or charcoal burner
Pls show the forg burner on video it will help full for me pls👌👌💐
czcams.com/video/OsLkSK6tMls/video.html
Excellent video as always thank you !!!! Congratulations 👏 🎊
Thanks for watching!
Great video! I assume these transistors where all T03's? And that you cut them open with an angle grinder. And only use the die and the bondwire of it, is dat correct? And do you perhaps know the total weight of the 1500 transistors?
That's correct I was given only the dies of the TO-3s to process, so I don't know the overall weight.
Beautiful, was happy to see this video this morning. Thanks!!
Thank you for your support since the very beginning of this channel!
доброго здравия. сейчас посмотрим что Сова приготовил.))
благодарю за видео😊😊
Спасибо за просмотр!
@@OwlTech333 вы же знаете это не трудно, трудней донести полезную информацию.) удачи.
Great job, well done sir
Thanks!
Amazing now that's a button 👏 excellent video thank you 😊
Glad you liked it!
Nice work sir
Thanks
✌️PT
Thank you too
very nice i like gold button good job idol..
Thank you!
Great work as always!⭐⭐⭐⭐⭐
Thanks again!
Exelente proceso,y muy bien explicado👍
Nice button. Hope you wore a respirator, You just put a load of lead oxide into the air
We did wear respirators
Здравствуйте! ЛАЙК вам ✌️🤗. Скажите пожалуйста шо за порошок СМБ? И где он переминается! И скажите он пры осаждения золота тянит другие металлы? Спасибо большое 😉😁
смб если не ошибаюсь это пиросульфит натрия. хотя незнаю зачем пишу если автор не отвечает.
Так точно!
@@OwlTech333 люблю ребусы😂😂🙈
Na2S2O5 - sodium metabisulfite - SMB - пиросульфит натрия при осаждения золото тянит МПГ, поетому если они присутствуют в растворе должен применяться другие редукторы - нитрит натрия, щавелевая кислота...
@@OwlTech333 спасибо большое 👍 я незнл шо пиросульфид так обозначают ☝️☺️
After IC incineration you did not wash just added the lead?
Yes
I don't use the smelting technique to make the dore often but I am curious do you lose any gold to the slag with the sodium hydroxide at high temp? also how do you dispose of the slag? i'd assume it is like cupels and absorbed some lead? or does the mass amount of carbon absorption keep all metals from oxidizing?
Gold could be lost trough mechanical enclosure in the slag when the slag is not viscous enough, sodium hydroxide helps with slag thinning. I don't dispose of the slag, it can be remelted over and over again, or it could be converted to metal, with reducers.
Транзюки дали результат в основном! Но думаю что потери есть как грама 2 точно 😊
Great video. Thank you. Please take care and stay safe. Talk to you later my friend. 🙂🙂🙂😇😇😇👍👍👍
Heya !
What a great result again !
It's still too cold here to start recovery season and i feel impatient to begin.
People can't imagine the time we spend on finding and preparing the ore...
A question :
Is it a home made crucible your are using in that vid ?
Prices of all needed component to work are getting higher and higher as inflation grows...
Do you feel the same dream as precious metal's prices will explode this year ?
Whish you the Best.
GodBless you.
Hi there mate, always happy to read your comments! Regarding the crucible - yes it's DIY :) crucible bottom of a natural gas cylinder (mild steel)
What is the thickness(Gage) of steel sheet 1mm (or) 2 mm
@@rightvideos5057 2.5mm the stainless steel sheet the one used for crucible is about 5mm
Сова фантастический результат! Лайк за великолепную работу! Интересно за счет чего такой выход? Транзисторы обычно 30мг это с количества 45г,22г с микрух это 5 мг в одной,всегда считал что в таких 2мг.
Спасибо! Микрухи 0,007г Транзисторы 0,018-0,025
Hihi. Yes it wat bad🌹Nice gold sir
Thanks for watching
wieder mal ein sehr schönes video
Vielen Dank für Ihre Zeit!
very good
Parabéns pelo trabalho e talento owltech.
muito obrigado
Great result!
Thanks!
Super nice👍how can i get rid off paladium from gold solution dont have dmg or formic acid ? Need help the solution has gold and paladium an a bit off silver
You can use sodium nitrite or oxalic acid
Привет, процесс интересный, навеное трудозатратный но стоит своего!
Привет! Наоборот процесс самый быстрый из тем которые я знаю, все закончилось за около 5 часов
@@OwlTech333 Я такой способ не пробовал, но итнересно а мосты от пк тоже без потерь обжигать можно твоим способом.
@@Detalius Пока не пробовал, но уверен, что будет работать как с оптронами, так и с процессорами, завтра жду приезда партии 10 кг мостов и сниму процесс.
Красавчики. 👍
هل يمكن صهر القطع ألتي تحتوى البلاديوم في الفرن مباشرة وشكرا جزيلا لك ونرجوا منك التركيز على الطرق البدائية بدون الأحماض
يعتمد على المطرقة ، إذا كان يمكن الوصول إلى درجة الحرارة هذه
ما هي المطرقة وشكرا جزيلا
I tried this method today i added 3kg lead and 50 gram silver for 3kg gold contain material finally i got 500 grms melted lead I have tested in computer machine it shows 21k gold present in this lead metal
Now how to remove lead from this melted metal before dissolve in nitric Can you explain pls
You should to oxidize lead. Do it with cupellation and oxygene
czcams.com/video/XJe5U0lOfiE/video.html
Hi, i dont understand how the lead has extracted from the melted dore? Please can you explain.
it was oxidised to litharge and removed with the slag, google cupellation
@@OwlTech333 thank you very much
Fantastico
i think i already asked you but what are the titles of the two music tracks again?
m.soundcloud.com/owl-tech/tracks
Very good 👏🏾👏🏾👏🏾👍🏾🇧🇷
Thank you!
Jast feri goood master
Hi
Can you process 10kg gold plated pins?
How to contact you and get it done?
all type of ic optocoupler have a gold inside? sorry my bad english
Don’t know about all but these ones do
Thanks for posting! The background music is so annoying, though, that I had to watch it with sound turned off.
Yeah I know its time to change it
I just love the music.
Най добрият.
Благодаря!
Можете ли да говорите на Български език?
@@1lt3r с Google translate мога да говоря на всички езици 😊
Hello sir what is de-NOxed and sulphemic acid why in use please sir answer me you very legend man
de-NOxing is the process of removing the free nitric acid from the solution, some people are using urea, some evaporate three times with HCl, some are using formic acid, I prefer sulphamic acid as it concerts the free nitric acid acid to sulphuric, which precipitates lead as lead sulphate if any is present. If you have an active oxidant in your solution and you don't deNOx the gold you precipitate will go back in solution
@@OwlTech333 thinks I am big fan
👍👀
What music is playing in this video, between 00:50 - 09:13 minutes?
soundcloud.com/owl-tech/something-big?
@@OwlTech333 thank you
Muy bien.
Think pink Floyd music wd sound better Great video though
How is it possible to sleep in soluble water after SMB?
good
hello sir, is it possible to get Palladium this way?
yes czcams.com/video/C6_hU8klfxE/video.html
Holy fuck! Nice !
Tebrikler.
Not bad 🌹
👍
Извените увидел серебро если не сложно какая в данном случае пропорция свинца и серебра на этот объем
Ag:Pb 1:5-10
Yeah that what I'm talking about,
Combien cela a coûté de produit
Sir gold complete refined not what smb
Video 👍 music 👎 sick of hearing it now very old, however a good job boys 👌
공유 감사합니다
~$4400ish
عملية معقدة بدونها
👍👍👍
الستيل كان فيه اسمنت او لا
رقم
Хай возник вопрос диски не метал вроде молибден почему он не сгорел
Не растворяется свинцом
سلام عليكم الدقيقه ٧ كان القرص فظه او ذهب او رصاص او ذهب
Ag+Au
Stannous Chloride after smb the color becomes brown
copper
Extraction
ما شاء الله
How to extract residual gold from SMB water
Do a stannous chloride test, you wil see that there is no gold left after precipitation.
I am follow your video from 10 years ago and still can't produce gold button,,😂
This doesn't speak well of my videos 😂
What color is copper
brown
🤗👍👍
هذا نحاس أصفر... وليس ذهباً
هذا هو التعليق الأكثر سخافة على الإطلاق! من الواضح أنه ليس لديك حتى فهم أساسي للعمليات المعنية.
@@OwlTech333 من الواضح أنك افهم واحد في العائلة عندكم في الأساسيات المعنية...
И как изготовить такую печь хочу научиться вашему искусству
Какое искусство, это самы древней аффинажный процесс
czcams.com/video/OsLkSK6tMls/video.htmlsi=9MYXmOsH-Xzw-ojj czcams.com/video/1UfeWc8t4Ys/video.htmlsi=s09w-76o-TOm1vcj czcams.com/video/C6wIIKtsXTs/video.htmlsi=n-fhMzUdXJZYNFQ4
@@OwlTech333 спасибо большое за ваши ответы
Almost like cooking wack 😆 or recooking
هل يمكن وضعها في بوتقة اسمنتيه
Yea
شكرا جزيلا لك
فيديو راىع
شكرا سلام و صحة
Привет удачи и здоровья
I think.. Hm... 98-110 gram🙂
Что означает порошок смб и в ролике я не увидел серебра
Пиросульфит натрия
Привет. Ни хрена не пойму, материал советы. Ты кто?
Привет! Я свой!
O
With so much lead you can create two beautiful Dino egs
Offffff fuk another lead lead lead lead
👍
👍👍👍👍