Braxton Mfg - deep drawing process - Eyelet

jvs.solutions/
www.braxtonmfg.com/
Starting with flat stock, Braxton provides the deep-drawn advantage from subminiature to complex parts.
Compared to screw machines, plastic extrusions, tubing and stampings, Braxton’s deep-drawing techniques offer many benefits:
- Starting with flat stock and ending with a tubular part, this process minimizes material waste.
- Superior part-to-part and batch-to-batch repeatability are assured.
- Slitting, flaring and hole punching, normally considered secondary operations, can be performed on the drawing machine.
- Intricate designs not previously possible can be produced.
- Raw material is work-hardened during the drawing process, therefore eliminating the need for secondary heat treating on most finished parts.
- Significantly superior tolerances and finishes, in comparison to competing processes.

[@edsiegal]

This is a nice video of the process, but why not model the material thickness change as it goes through the various steps. The model shows that the thickness stay constant at each step, but in reality, the sidewalls would thin incrementally at each step... yes?

[@kailasdeshmukh3255]

I worked this line 18 years

[@user-ex4fx1de3z]

what is this program?

[@Thomas-jq2im]

That music got me jamming though!

[@mrsmurf911]

Micro deep drawing Upside down

[@alexijenner1898]

Vintage!

[@bestamerica]

'
what is t his use for

[@mrossetto.unicamp]

It's a type of metal forming process, as it is relatively simple and fast, it may aswell be pretty cheap, meaning that if you need a part and it could be made by this process, you would get an economical advantage by using this method instead of some others.

[@bestamerica]

@@mrossetto.unicamp
hi M.....
'
thank explain...
what kind of metal as aluminum or brass or bronze or copper...
can use hard or mild or soft iron / steel

[@mrossetto.unicamp]

@@bestamerica there are a lot of alloys in which this process can be used, it basically requires that the material can sustain plastic deformation without cracking (it must not be brittle during the stages of the process)

[@jjtrades7186]

That's the strangest looking crack pipe I've ever seen

[@user-ev2jd7oh6c]

야 블리지가 없는데 가능하다고 트리밍 없잖아?

[@celidarqs6861]

Propagandanojenta

[@mrossetto.unicamp]

kkkkkkkkkk ???????

[@user-tr5kt1hd5n]

이건 그냥 낙서 일뿐
낙제점수 0점
어린아이 장난일뿐
이송장치
제품취출
제품낙하
이것이 표현이 되어야지요