Losi please sponsor this man! He’s going to need bearings and chains. Gil losi said in a podcast basically the bike needs the rider for stability, so they know about speed wobble.
I really hope these RC companies are paying attention to what your doing they could learn a thing or two and the New Jersey on the rider looks awesome definitely gives it a more aggressive look
You’re an evil genius Earl. Minus the evil. We all wanna be Earl! Except for the ugly part 😂 jk jk love ya man! You are defining the protocol for modding this machine with no book or written instructions. Rc Jesus! Thanks dude great job
Something you might want to consider,I put the new vitavon front brake rotor and caliper on mine,and it has a lot more stopping power than stock,just thought with the speeds your hitting,it might b useful if one of those trucks or cars pull out in front of you.its a bit pricey, but definitely worth it.
Try remounting the rider back on the seat. I drilled new holes father back for the rider mounting and it leans the rider lower forward. I’m 3D printing a new mount that makes the rider stand up off the seat. That will also help with the trapped air in ye’old nutter region
You still running ms6s or did you find another gyro? It’s probably going to do strange things like wobble at high speeds since its systems PID loops are tuned for 2s. I want to see what system you’re using for higher voltage.
It’s in the playlists and the stock gyro I’m still using on 2S easy set up to run any esc you want in the promoto 👍then you can run any battery as well keeping the gyro on 2s
This is awesome, however, the aerodynamics at 100mph may cause too much wind resistance to overcome. I look forward to seeing it though if its possible!
I need to find someone who can use a soldering iron, I have a few projects, but my skills are terrible with an iron. The bike is looking sweet. I'm still not sure if I want one. I'm not sure it's a good fit for city bashing.
Earl, maybe SMC can make you a 4s battery that will fit!? I may be late in suggesting him, but I know that he has a good reputation for building batteries that do things that no one else can do! Looks like this project is on the way Earl! Good Luck!
Y not use a plane avian esc? 100a/60a avian will do 2s to 6s. I convert everything I fly to avian esc's, just for that reason. Surface esc's are always gonna be bigger because they 'need' reverse & a fan. M/C don't need reverse. + the flying versions are as small as possible.
I have a question Earl have you tried to bind the spectrum controller to your Dbxl after the 3.0 update. I tried to bind it to my Losi 5t 2.0 and it does but I don’t know how to get the kill to work with the 3.0 Any advice would be greatly appreciated
All the memories is wiped out so you need to set up everything on every rc again set up the channel you have the kill switch plugged into should solve it
You’ve got to edit out some of the little boring stuff brother. If there are three wires to strip… show one, then move on… or soldering all three?? Just show one and move on… and talk while you’re working… just my opinion. Other than that I dig your channel
100mph on the losi bike? Dude you know its not possible. Not enough weight and horrible aerodynamics. Remember the mojave attempts lol....no1s trying because it wont work. Good luck tho...nvm me😂
Losi please sponsor this man! He’s going to need bearings and chains. Gil losi said in a podcast basically the bike needs the rider for stability, so they know about speed wobble.
Losi is owned by HH. Any decisions Gil had, are all made by Horror-izon now.
I'm just waiting for the Coke Kan install😜
A max4 could be mounted as a backpack for the rider in case you want to try out 12s. You might need a side car for the batteries.
Hell yeah, can’t wait for some 4S power 😎👍 great stuff 🥃
Good job Earl , looking forward to seeing this thing fly 🏍️💨
Right on Earl 👍👍great info, looking forward to the 4s run
"Cut em short" holy snubbed right off 😂 great build. Thanks for sharing
Thanks for the sneak peek. Can't wait for the next video... Salute!
I really hope these RC companies are paying attention to what your doing they could learn a thing or two and the New Jersey on the rider looks awesome definitely gives it a more aggressive look
Great video as always Earl...... 💪👑..... im going to say 85 mph ...... the anticipation is real ..... 😂
Earl tank you for making it voice all keep up good work Earl Moorhead 👍🍻💯🍻👍⭐⭐⭐⭐⭐⭐⭐⭐
You’re an evil genius Earl. Minus the evil. We all wanna be Earl! Except for the ugly part 😂 jk jk love ya man! You are defining the protocol for modding this machine with no book or written instructions. Rc Jesus! Thanks dude great job
Thanks
Hey that’s my ESC from the orange coke can build I never used. Lol
Lol way to small 😱
Something you might want to consider,I put the new vitavon front brake rotor and caliper on mine,and it has a lot more stopping power than stock,just thought with the speeds your hitting,it might b useful if one of those trucks or cars pull out in front of you.its a bit pricey, but definitely worth it.
I figured i better contribute to the awesomeness
Appreciate your support 💯🙏
Thanks! Hoping to that rip over 100mph.
Appreciate your support 🙏💯
Try remounting the rider back on the seat. I drilled new holes father back for the rider mounting and it leans the rider lower forward. I’m 3D printing a new mount that makes the rider stand up off the seat. That will also help with the trapped air in ye’old nutter region
Great work. But I think you’ll need some sort of steering dampener like on real street sport/ bikes
I can't wait to see how it handles 4s power! Should be good except maybe sone of the plastic gears?🤔👍🤙💯
Hey Earl I’ve watched a lot of your promoto videos but not sure if I caught them all. But have you replace the steering servo yet?
No
Thanks!
Appreciate your support 💯
Nice
Wow she sounds FAST !
Sweet
have you had a look at getting a smaller sprocket for the back wheel
Yes
What 4s battery are you using???
Look at drone lipo batteries, I run some in my 1/14 scale 3s buggies and they smaller and good power
Chears to 4s 🎉. That will be Cool 😎
You still running ms6s or did you find another gyro? It’s probably going to do strange things like wobble at high speeds since its systems PID loops are tuned for 2s. I want to see what system you’re using for higher voltage.
It’s in the playlists and the stock gyro I’m still using on 2S easy set up to run any esc you want in the promoto 👍then you can run any battery as well keeping the gyro on 2s
Copperhead 10 esc is a small footprint if speaking castle
Is taller with the fan tho after looking
This is awesome, however, the aerodynamics at 100mph may cause too much wind resistance to overcome. I look forward to seeing it though if its possible!
😎💯💯💯
It should be double this size now yes definitely
I need to find someone who can use a soldering iron, I have a few projects, but my skills are terrible with an iron. The bike is looking sweet. I'm still not sure if I want one. I'm not sure it's a good fit for city bashing.
What 4s lipo r u using???
This is gonna be a 2 wheel streak going down the road soon !
Appreciate your support 🙏💯
That green thing is a ferrite core
Earl, maybe SMC can make you a 4s battery that will fit!? I may be late in suggesting him, but I know that he has a good reputation for building batteries that do things that no one else can do!
Looks like this project is on the way Earl! Good Luck!
Smc is a terrible person as he stole $200.00 from me years ago before he became popular
Please avoid Amazon's vans when you hit 100mph!
Dude Earl, that bike looks sick as tits. But no front fender 🤔.
Yes it catches air and causes a bad shake at 60+
Going to have to call this Pro Moto the Oreo cookie 😜
Got milk 🥛
Esc torture test! Yikes.
Skip 4s and go 6s🤙🤣
6s/2500 should fit😊
Y not use a plane avian esc? 100a/60a avian will do 2s to 6s. I convert everything I fly to avian esc's, just for that reason. Surface esc's are always gonna be bigger because they 'need' reverse & a fan. M/C don't need reverse. + the flying versions are as small as possible.
I have a question Earl have you tried to bind the spectrum controller to your Dbxl after the 3.0 update.
I tried to bind it to my Losi 5t 2.0 and it does but I don’t know how to get the kill to work with the 3.0
Any advice would be greatly appreciated
All the memories is wiped out so you need to set up everything on every rc again set up the channel you have the kill switch plugged into should solve it
1/7th scale
Losing needs to make 4s bike to sell also.why are you the first doing thus isn't bike fast enough?
Fast enough stock for off road for sure but I’m different I love speed and over powering rc cars to test the limits of stock parts cheaply
Speed rip hahaha
You’ve got to edit out some of the little boring stuff brother. If there are three wires to strip… show one, then move on… or soldering all three?? Just show one and move on… and talk while you’re working… just my opinion. Other than that I dig your channel
That’s was 2 hours of footage and cut down not sure what you mean ppl watching to learn a new skill it’s definitely not for everyone 💯
Boom epic 🎉
Yeah buddy, get some!
Let's goooooo .....
Black Jersey part number????? 🤣😂🤣
In the video guy 🤷🏻♂️🤣🤣
tires will eject at 100mph
I am so tired of these tire pump forced ads
Nice vid... but it's NOT a Uniform... it's riding "gear". Or jersey or riding pants.. "not a uniform". Thanks.
Have Fun
100mph on the losi bike? Dude you know its not possible. Not enough weight and horrible aerodynamics. Remember the mojave attempts lol....no1s trying because it wont work. Good luck tho...nvm me😂
Jenny’s has that esc for $75
Yes plus shipping and tax 👍
Thanks!
Appreciate your support 🙏💯
Nice