How to make a Portable Thermoelectric Air Conditioner at Home
Vložit
- čas přidán 4. 06. 2018
- How to make Portable Thermoelectric Air Conditioner at Home
In this video i will show you how to make a portable thermoelectric air conditioner at home, in this project i have used thermoelectric device(peltier module) for cooling purpose
Material Used
1- 2 Peltier Module
ambaniurl.com/ZvZTMjcl
2- 2 DC CPU Fan
ambaniurl.com/nosU
3- 1 AC Exhaust Fan 2600rpm
ambaniurl.com/3NeQ
4- Thermal Compound
ambaniurl.com/xXtNdW
5- 2 Small Heat Sink
ambaniurl.com/6bceewAg
6- Styrofoam
7- Hardboard
8- 12V 5A 120W Supply
amzn.to/2J270Zw
#portablethermoelectricairconditioner #thermoelectric #airconditionerathome #thermoelectricairconditioner #peltieraircooler #scienceproject - Jak na to + styl
It was very good,
just want to give an idea, instead of connecting the tablets in parallel and connect in series, and a tablet is 6w and another 8w and instead of being two windows back and be only one with the two tablets stay on top one of another (tablets) will have a consumption instead of 9.9w goes to 3w and the temperature falls in parallel if it has 29 degrees in the environment descends to 13, but if it has in series with the same external temperature of 29 degrees there already but it will work well as well as with more consumption and less cooling.
There are several mistakes in this video:
(1) The box is not fully attached with the cooling part of the module. May be the warmer side can be cooled by it's own module! Really it's an innovative idea!!!
(2) Power supply 12V 5A = 120 W. I think it need to be recalculated.
(3) Exhaust Fan fitted in opposite direction. That is why module didn't work. So he heated the thermostat with a lighter to 50+ degrees and waited in an AC room till the temp. went down to 24 degrees and he immediately stopped the video. Good thinking!!!
You're right. All fittings are wrong.
Sir aapki mehnat ke liye like + subscribe to banta hai 55°c room temperature 🌡️🥵hai tab bhi aapne itni mehnat karke video banai kya bolti hai audience like +subscribe karo jaldi‼️
Hey can you post the list of parts? The exact ones you used? This is the perfect size for what I want to do.. please.
this is why you should study thermodynamics.
the room will only get hotter, its like keeping the refrigerator open to cool the room , it will never cool. will only get hotter.
The hot side of the peltier should be directly exhausted out of a window, then this will work well.
@@Synthematix You are correct about that
I‘m trying to make a version of this where the hot heat sink is in a big container with cool water inside of it so the coolness is coming from the water and also ice if I put it in there... want to cool down a medium size room with it.. What do y’all think?
@@parzival9639 there are soo many things you are doing wrong. Firstly if u have that large amount of cold water. Just use that to cold to cool ur room . Why use the peltier module ?
Second. You can't cool ur room with a peltier module it can't remove such large amounts of heat quickly . The heat entering ur room will always be greater than what ur removing with a peltier module.
Also there is a limit upto which u can increase the temp difference between the two sides of a peltier module after that it fails . U can't keep making the hot side colder to remove heat there is a limit to it.
3.They are highly inefficient . If u are planning to connect multiple number of peltier modules to cool ur room. Just use a air-conditioner. It might be more efficient.
Juned Mohamed thanks for answering! To your first point: I don’t really have a way to cool my room with the water because I don’t want to use evaporative cooling and blowing air onto a hatsink which is connected to the water doesn’t have that much of an effect... To your second point: my room is pretty well isolated, but my question (not retorical) is: If I can’t cool down my room with peltier modules, how can I? Because I’m essentially blowing air from a -5 degree celcius heat sink into my room... I don’t have anything that is colder than that so I would have to use a different technique but I don’t know of any other. To the third point: I want the cool side to be under freezing point, can I sustain that temp for a longer period of time? So effectively my question is: what should I do?
I can understand your struggle for this urgent ac! 51c• not a joke
1 hari tidur di kamar ente bisa mateng om.. 51.6° C ... Amazing 😁😁
from where u have got the Peltier module? it is the smart way to cool if designed properly.
助かります！！
The hot side of the peltier should be directly exhausted out of a window, then this will work well.
yes the conservation of energy agrees
or have the hot side water cooled with pc water cooling parts with the radiator outside (of your window or put it in another room) so heat is move out of ur room to the other.
Wowe, great video, thats how u measure the temperature and not like those people who place the temp. Sensor direclty on peltier...
His room temp is so hot 😂😂🔥
50°C😭
Haha 50c
Probably heated up the sensor for a more dramatic effect.
His temperature room is 24 and he heat up the sensor to 50 so all its fake 😭
50°C 😂
Amazing, I was looking for a cheap way of making the ac and a convenient manner ,could u please tell the room tempreture
Should it install like big window AC in which back side is outside of room... Coz peltier too is hot on back side.. from front it blows cool air and from back it blows hot air...
How room become cooler??
Plz let me know the how to install it?
Yep. These videos claiming to make an A/C box with no venting of the heat pumped OUT of the room air are all BS.
Nice project👍..i will prefer to use 12V 10A or 12A. to suffice peltier in parallel. 10A @ 12V will produce 120W.
Dayyyyyymmmmm you made a heater
สวัสดีครับแอดมิน อยากจะขอสอบถามว่า ชุดเครื่องปรับอากาศแบบที่ทำในคลิปนี้กินไฟต่อชั่วโมงมากน้่อยแค่ไหนครับ ผมสนใจอยากลองทำมาใช้ดูแต่กลัวไม่คั้มค่าไฟเพราะอยู่หอพัก
do you think you could make a 700 btu air conditioner using tec?
Hello, can you tell me what is the name of that box that you used to connect the little ones? Please
Bhai ye Hawa deta he acchi aur thandi deta he and zyada powerfull banana ho to kya Kar sakte he
Nice amezing
Wow that's good thing I need more information about it
For how many hours or how long can you use this airconditioner continuesly?
Умняш! Ты спас галактику!
Great home made portable air conditioner I would buy one
if the big heat sink is exhaust will i use also a big heat sink in the other side to make it more cooler????
i love this song. i have it playing all the time.
Fun project! However, this wouldn't work at all unless you move the heat collected from the Peltiers to another area isolated from the volume you try to cool down. As shown, this design will only work as a heater, essentially. Another thing I noticed was the direct connection of the hot side with cold side with screws. I would also dare you to make this using no glue at all.
Agreed, he is adding more energy into the system. Room's average temperature should increase.
I WONDER, WHERE DID HE BUILD THIS ODD "WHATEVER"?? TEMP WAS 51C.!??! IN SAUNA? NORM ROOM TEMP IS ~19-23C. IN THE END TEMP WAS ~30C.!! 😅😅😅
el mejor uso que se le daria es en tu automovil ya que es un espacio pequeño cierto??
Gostaria de comprar um porem e preciso alguma indústria fabricar o mesmo de forma a disponibiliza-lo comercialmente seria um sucesso de vendas
AMIGO SOU TEC...EM ELETRONICA E ELETROTEC...FIQUEI CURIOSO QUANTOS GRAU DO FRIO DA NESSE TEU TEMOMITRO QUE EU NÃO VI.ÓTIMO ESSE TEU PROJETO...
ชุดทำความเย็นแพงไหมแบบนี้
Finished at 24.4 Celsius degrees !! This is not cold !!!
24.4C and equal to 76F
Gooood!!!👍👍
Thanks
Power supply you wrote 120 watt, 5 amp. I think it should be 10 Amp. Which peltier did you use?
There are two 12V 5A supply hence 12x5x2 = 120W , Each Peltier consumes 12V 5A and 2 Peltier module are used🙂
What was the ambient temperature? Without that, we have no idea how well it works.
Jack m the experiment at Sahara desert 😅😅😅😅
Sir large and small heat silk kya kam karta hai iski prise kya hai.yah kaha milta hai and peltier module ac nahi hota hai?
goood effort gais
Quisiera saber si ese aire sera capaz de climatizar por ejemplo un area de 4 metros cuadrados?
como el amigo no responde no me voy a suscribir
Wonder how are going to get rid of the water condensation
C'est bien pour un rafraichisseur personnel après tu ne va pas refroidir une pièces car les modules dégage autant de chaleur qu'il n'en absorbe, il faudrait un module de watercooling avec la partie chaud en extérieur.
The air Vent needs to be re designed for more efficient cooling and reduce the strain on thermacol while sucking air in and expel it outside in the back.
this doesnt work the heat the tec generates at the other side just dumps back into your room
Yep. Net loss in the whole system if all you're doing is pumping MORE heat out the back than the cold that you are creating in front. Stand back a few feet from this thing, and you will feel that the room is getting hotter, not cooler.
Keep it at the window.
Hot at outside the room
And Cool side at your room
U noob😂😂
You need to put a pipe for hot air outside the room
Then it will work
Nice idea...
so cool bro
Thanks
Kaç watt güç harcıyor ortalama
esse foi uns dos melhores projetos de ar condicionado que vi até agora prarabens para o sei idealizaDOR...
Buen proyecto pero tienes que colocar una entrada de aire al espacio frio de la caja, porque no lograras enfriar nada, creas un vació con el ventilador dentro de la caja y no fuerzas a que entre aire nuevo para ir enfriandolo, así no tendrá el efecto deseado y se que es demostrativo pero ahora habrá que colocarlo en una ventana para dejar el lado de calor aislado del espacio a enfriar.
Pienso que es mejor colocar un disipador de forma de trampa para que el aire entrante se ha forzado por el ventilador frontal ha atravesarlo y así enfriarse mientras lo hace.
Acabo de fabricar uno con dos celdas le puse unas placas de aluminio para que el aire que entre atraviese por el camino entre cada placa que van unidas al disipador puse un ventilador a la entrada otro a mitad y uno a la salida lo usaré para enfriar terrarios de 1.5 m x 60cm x 50 cm para serpientes de montaña en temporada de brumacion para bajar más la temperatura en tiempo de invierno y para ese uso va bien pero para enfriar una habitación no sirve ni siquiera sacando el lado caliente del cuarto por qué solo baja la temperatura 5o6 grados a la salida
I am confused. The large fan was sucking in air, yet it was getting cooler. Shouldn't the large fan be blowing cool air, Out?
No? It is blowing out.
Why are those thing going in the opposite direction if it was blowing out air?
Yep it was sucking in
right it's sucking the air in 🤦♂️
NICEEEE
what a smart idea
5a psu is not enough especially if you have x2 tec1-12706 which use 6 am and u have to say you really want 15-20 amp psu.
Gostei do seu projeto, bem interessante.
wonderful
Thank you
Pero por donde sale el aire frío?? Si el cooler de adelante tira aire para dentro de la caja. O sea que es una heladerita
Isso era pra ser um ar condicionado???
pak. mau tanya. heatsinknya dingin. tapi tidak ngefek ke kulkasnya itu
cut up some aluminium cans and jam in slots on heatsink to increase fin size and maximise air to cold surface contact area just like a real AC uses an evaporator. Also, water cooling hot side works better with salted water.
David Ujcic o
Mantık güzel geliştirilmeli ama sistemin işe yaramadığı apaçık ortada 51 dereceden başlayıp 27 de bitmesi insanın komiğine geliyor tek fanı çalıştırsan en az 25 derece sıcaklık verir
Işe yaramazmi diyorsunuz antalyada lada samara aracima nasıl bir şey yapabilirim fikriniz varmi peki
We can supplier the high efficiency peltier module
24 degrees C is still way too hot if it was near enough 16 then I'd be impressed
you are pulling in heat off of the hot side of the peltier modules since it in not insulated.
I hate it when they upload a interesting vid and then do not tell what they are doing . They just say here look at this, I am realy smart, now you try to figure out what I did.
Really sorry to be picky. But Mr hacksaw's logo is a wood saw. Not a hacksaw.. lol
I like this
Simply use cold water and fan
Mind blowing 👌
Please help me make a music pad roland 20x for my project please please
Your heatsink url is not working ...plz tell me the site where i can buy good heatsink in low price
I will update the URL
لو سمحت شو اسم القطعه المبردة ومن وين بقدر احصل عليها
Esa cosita cuadrada eso enfría oh ay que ponerlo en el freezer para entonces poner al aire acondicionado eso enfría sin tener que ponerlo en el freezer?
How many pliers of 12715 can be cooled to room 10 by 10 feet and how many 12706?
Commercial AC is better for large rooms
👍🏻
anmol trivedi no
Nice..,but it can be possible to run continually..,
Which side goes out the window?
Id throw the whole thing out the window!
Hamish MacMonster technically if you blow the hot air outside then the cool air will be blowing inside would take some fans around the room too but only could possible if you have a divider beteeen the hot and cool sides. Like a window air conditioner, someone should try and make a bigger one with more peltiers!
Good
Great,,the front side blows cold air and the rear blows hot air so the air is just fighting one another how can it cool your room?:)
you have it set up so the exhaust is blowing out of your room and the cold side blows in, simple
The Peltier's hot farts go out the window. 😉
The solution is to put this thing in the window , cutting away part of glass of the window itself ( not more difficult to install than splitter ) ...
Cloud Strife I'm building one of these for a 1989 van that doesn't have AC, and what I'm doing is making the hot sides of the peltier units water cooled with the two water lines going through my floor to a small CPU radiator mounted under the vehicle. The hot side will also be insulated so no extra heat can radiate into the van.
Cloud Strife exhaust the hot air like a window unit aircon
Hi, nice vídeo! Cool concept but the project is a little bit confused! And 51,6 degrees in room temperature! very hot! Has something wrong on your thermometer.
Normal room temperature is 34 degree, how it become more than 50 degree,😁
Joy Philip hahahah you are Right
Was thinking of the same thing, he must have heated the sensor before hand with a lighter or something... 50° indoor temperature is such an exaggeration. My guess is, his actual indoor temp. Is somewhere around 28ish, so his "AC" didn't actually do much.
He measured the heat coming off the other side of the unit first, maybe? Might have left that part out of the recording?
Eso en realidad no enfría una habitación . Si piensa que la célula peltier por un lado enfría y por el otro se calienta y si esta tirando el aire frío y caliente dentro de la misma habitación esta se mantendrá a la misma temperatura. Para que funcionara tendría que sacar el aire caliente fuera de la habitación .
lo pones en una ventana y listo pa te ahorras discutir al pedo
@@fernandobecker3361 osea que la solución es decirle póngalo en la ventana y listo . y el porque? y el argumento ? y el razonamiento ? yo solo le digo porque no funcionaria su invento . y el dirá si tengo o no razón . y después tendrá que buscar la solución a ese problema . es eso lo que hace que se desarrolle el pensamiento las ideas y no dar una orden y ya .
Hi bro can i direct connect to current
Wasted a 120watts of power consumption to cool it's own self down. Round & round it goes around itself.
Please tell about the costing of all items used
It will take more time to cool but it's nice
I'm not a big fan of that royalty-free music track.
It's the sound track of bad youtube ideas. jk on this one tho.
Lol fan being the operative word.
estan al reves, el ventilador segun la posicion de las celdas esa parte da el calor y la otra da el frio..........
the big fan was sucking in air still it was getting cooler how is this possible ??????/
Ahmad Rajpoot Gili Gili hocus pocus
i didnt get that
At 9:38 it shows 51.6 C! Buddy your ambient temperature is 51.6 Degree Celsius??!!! Where are you from?!
Hector Domino my guess is his thermometer was probably way out of calibration
unless he's in the desert.
Or he actually heated the sensors beforehand with a lighter... His actual room temperature may actually be only 28ish... He must have done it to show how good his "AC" is... To have brought down temp from 50°ish to 24° in no time lol.. Even real ACs can only dream of doing that... In an uninsulated environment...
May be he lives in Sahara Desert!!! we dont know!!
Maybe he's living on the Mars.
Yo lo hice con cuatro peltier 12706 y aunque funciona, no enfría, creo que logré un calefactor porque las peltier calientan mucho . puse disispadores y coolers pero sólo tira aire caliente, frío nada
con uno seria mas que suficiente para que la parte de enfriar sea mas eficiente y la parte de calentar solo seria un disipador y un cooler saludos
Peltier part kha milenge
اخي قصدك محولة كهرباء مال الشبكة الوطنية ولا ايه
First track's name?
Rather than air conditioning, are not you a cooler?
Can anyone tell me is it safe to use 12V 18A PSU for 12706?
Emre S. No problem. Always use a higher ampre power supply for a lower ampere load BUT never a higher voltage.
Kaç derece faydası oluyor
I want that
mujhe ye bna bnaya chaiye body nahi prise btaiye
9:41 are you kidding me your temperature is 51,6 degree celcius its veery hot
ถ้าทำแบบนี้เล้วเอาไปเป่า พวกบอร์ดอิเล็กทรอลิก จะมีผลเสียไม๊
หรือว่ามันมีความชื่้นมากว่าแอร์เยอะครับ