Velikost videa: 1280 X 720853 X 480640 X 360
Zobrazit ovladače přehrávání
Automatické přehrávání
Přehrát
wow! this really helps a lot as the angle of the video is clear and no obstructions. heap thanks!
Crazy you got that recording of an alien at the end.
Videos de 20 minutos para cambiar una lampara. Gracias maestro!!! CCC Claro, Concreto y Consiso.
Thanks for uploading, this is so helpful especially to all DIY'ers like me.
*The LED should be at the 9 o'clock and 3 o'clock position when installed. This is the incorrect way at 12 o'clock and 6 o'clock*
Great video! However I had to put a load resistors due to fault up on the dashboard due to no resistance
How the hot air pumps out if the cap is closed. Need to add any kind of breath pipe for exchange of gasese
Some help..Ring of led doesn't fit on base how it's possible or better any idea how to fix the problem? It's H1.. And car is mazda 6 of 2006
Buona sera o montato tutti tipi lampade LED h1 sul sprinter nessun risultato che modello lampade led posso montare?
what is the H1 head light size ? H1 and H3 ?
Only one thing, use a tape at the connectors, it's dangerous to let the connectors free
Yeappp tell us brand? It's without ballast so interesting.. & why not foto or video how bright are these
Most leds have built in fan and ballast
Where to buy?
So do we connect the red wire on the led with colored wire? And the black with blqck??
MinJoe yup, black to black , red tored
My vehicle headlight is H1 but the ground wire is attached the the headlight itself...Is it still possible to install H1 LED?
@@K_N_44 make another wire from this ground to the black
@@K_N_44 i have the same problem. Did you solved it?
@@dovydn4762 nope i didn't solve it because it was a friend's car(more specific Bravo '00) and we didn't know how to install them so we left it with halogen Hope you have better luck 👍
Soooooo bad there is no cover between red and black wire
Como se llama ese led
Where can I get these?
Ebay
wow! this really helps a lot as the angle of the video is clear and no obstructions. heap thanks!
Crazy you got that recording of an alien at the end.
Videos de 20 minutos para cambiar una lampara. Gracias maestro!!!
CCC Claro, Concreto y Consiso.
Thanks for uploading, this is so helpful especially to all DIY'ers like me.
*The LED should be at the 9 o'clock and 3 o'clock position when installed. This is the incorrect way at 12 o'clock and 6 o'clock*
Great video! However I had to put a load resistors due to fault up on the dashboard due to no resistance
How the hot air pumps out if the cap is closed. Need to add any kind of breath pipe for exchange of gasese
Some help..
Ring of led doesn't fit on base how it's possible or better any idea how to fix the problem? It's H1.. And car is mazda 6 of 2006
Buona sera o montato tutti tipi lampade LED h1 sul sprinter nessun risultato che modello lampade led posso montare?
what is the H1 head light size ? H1 and H3 ?
Only one thing, use a tape at the connectors, it's dangerous to let the connectors free
Yeappp tell us brand? It's without ballast so interesting.. & why not foto or video how bright are these
Most leds have built in fan and ballast
Where to buy?
So do we connect the red wire on the led with colored wire? And the black with blqck??
MinJoe yup, black to black , red to
red
My vehicle headlight is H1 but the ground wire is attached the the headlight itself...
Is it still possible to install H1 LED?
@@K_N_44 make another wire from this ground to the black
@@K_N_44 i have the same problem. Did you solved it?
@@dovydn4762 nope i didn't solve it because it was a friend's car(more specific Bravo '00) and we didn't know how to install them so we left it with halogen
Hope you have better luck 👍
Soooooo bad there is no cover between red and black wire
Como se llama ese led
Where can I get these?
Ebay