2019 Renagade xmr 1000 maintenance bill and what to expect!! 🤯
Vložit
- čas přidán 8. 09. 2024
- Here a video on what you can expect for maintenance on a renegade xmr 1000. I tried to go in detail in everything they did at the dealer. Hope you guys enjoy!!
Gotta do that stuff yourself big fella
Great overview man! It's definitely not cheap to play with these top end mud machines, 5hats for sure.
Any other machine I'd say 50 hour gear oil changes are pretty excessive but if you're in the mud and water all the time it's probably a good idea.
Same goes for a Polaris XP1000 full lube oil change, I did my own. I suggest removing your skid plates if you do your own next time, if not expect to clean up oil, it runs out at every hole and crack on the skid plates.
Yes I noticed that. After a few days it was still leaking on the floor. After I cleaned it, it stopped. Good point tho 👍🏼
Do that yourself for around $100 using the OEM products or even cheaper using rotella t6 oil and royal purple diff fluid. Good to have them check it out first service but after that dig in man it's all easy👍👍
There’s always that first time they get you but after that I’m not going back. Everything is pretty simple to do after looking into it but yeah definitely. Thanks for the advice!
@@christianagosto1447 buy your dealers fluids filters belts etc ...it’s documented and covered under warranty
Just bought my renegade xmr 570, I’m doin the same thing. Dealer for first service, my garage after that lol
Dealership just tried getting me for a 100 hour service (860) bucks!!!! All for spark plug and valves belt and oil change!
I do all that stuff on my own for my canam , n i save alot of money fixing my own bike
Next time ill be doing it myself as well. Never paying that again lol
purchase a ( Outerwears Pre Filter ) and it repels water, cleans up easy and won't let your air filter get wet.
Will look into it. Thanks!
Yes sir Sky Power sports in Lakeland. Polk county
Make sense, you get what you pay for. High performance requires high maintenance
From my experience never let a dealership work on your stuff cause my canam maintenance total was 1,108 and the Honda 420 was 720 for full service
It's worth it . Nice machine of course I can do it on my own but that job as well will take at least two hours. Worth it for the warranty as well if u have.
its not worth it period....it can be done your self
Hahah that is the best looking atv i ever seen.
May I ask you what the big metall thing is in the front? Where you have the skull. Is it some kind of bumper?
Thanks for the comment! To answer your question, that is a radiator relocating kit and it also serves as a bumper. The radiator sits up top where the skull is at so it will not get as muddy making the engine not overheat as fast.
That why I paid for the maintenance package when I got my outlander xmr 2021
What’s the maintenance package?
@@huxie1x687 something they offer you when u buy one its like a warranty when u need oil change belt change etc
@@primetimemain how long does that last
@@rotz357 I think it's like 3 years
Yea, but I am sure they aren't losing out, how much does the package cost up front?
Most canam owners do there maintenance themselves it's really easy and you'll save yourself hundreds of dollars. There are plenty of CZcams videos to help you if you have a problem
Great intro bro
me encanta esa can-am yo quiero compara una pero en mi país El Salvador no encuentro
Nice bike man!
My local dealer wanted 900 bucks lol
Might be worth learning to do it yourself.
Gota grease your steering stem bushings
Was wondering if anyone else was going to let him know.
I would never trust anyone to fix my machine I do all my own maintenance lol and I save lots
Probs only took them 1hr but they charged for 2.5hrs because that’s what the corporate office said
Osto get that done yourself you can handle it trust me and it gives you more knowledge of your bike period
Sounds like u could of saved 300 by DIY
I never had the light come on for service, ill have to look into it
Every 50 hours it should come on
50hrs do uk how many miles that would be?
@@cliffmcguinness9335 my guess under 400 miles maybe.
Idk. I'm at 340 miles and I'm at 40hrs.
Depending how much u idle. I rarely idle my ride.
Dam i take my 2019 scrambler in and they do all the same stuff . $160.00 taxes in
I don't mean to say it but by a Honda lol I've never had any issues. Might not be as fast but I don't get bills like that.
Gd. Brotha
You could’ve got a set of RJWC neutrino headlights for that maintenance bill
I got some pretty good tips on maintenance on my channel check me out when you can
Sure could of lol that would of been an excellent buy unlike that bill. Ill check you videos out 👍🏼
Check out the link I left ... goes over DIY service
What cable did they lube and adjust? lol This is throttle by wire.
Nice can am
How you get your atv so clean!?
I use sc1
@@christianagosto1447 it’s that good? I need to try it on my Defender!
Fi hunned dolla grease job.....🤙
Your crazy bro you coulda done it for half that
Damn, Honda’s are stupid simple compared to these beasts haha…. Like reaaalll simple
But they make 11hp. They should never need any maintenance.
@@joebiker5992what? A Forman makes 30 hp lol. Anything with moving parts will need maintenance; Hondas are just more reliable than can-ams plain and simple. I own both and work on both; if you need a bike to work Honda is the way to go, but if I’m ripping and tearing I’ll pick my renegade all day long
@@TwoFeetDown92 ok... my point exactly. It makes 61 less hp. It sure better be more reliable for that much less.
@@joebiker5992no, just because they make 61 doesn’t give them a reason to be less reliable. Hondas are just better made, I own both and the build quality on the Honda is 10x better than the can-am. Japanese just do everything better, also my cb1000r makes 121 hp and has 10k reliable miles. A lot of it also depends on how you ride, most people swamp their can-ams and beat the shit out of them.
@TwoFeetDown92 lol. They don't make 61hp. They make 61hp less. Anytime power goes up, reliability goes down. Honda or not. The can am 450s, and 570s are known to go thousands of miles with zero issues. Honda does not make a 91hp v-twin atv engine. If they did, they'd have problems too. Can Am makes outstanding machines.
Never do that again it is so easy to change your own engine oil
Im not lol you learn as you go
$500 for fluids change? Gtfoh! You have a garage, change your own shit
Buy a grease Gun oil cost my 65.00 bucks to do mine
U Cando easily very simple buy grease gun for 26 bucks
For that amount of money u would think they would clean their mess up. looks like they just rubbed grease on the zerk fittings lol. Either that or they over packed the bushings to where its leaking everywhere. That is a complete shit job i would never take it back to that place again.
Why would you pay for that. Get to know the in’s and outs of your machine. 🤷♂️
Bro,that's standard care. On any vehicle unit basic. Now,these days just Google it. You tube video. God!Smh. I wish I was your brother many slap you and then 😆. And show you how to get it done your self. Maybe save you some money 💰🤑
Music way to loud..
Lmao hahaha do it yourself
Zzzz--zzzzzzzzzz! Add music or fight a street gang next time! Sheesh!
That's crazy