1s 2 inch tiny FPV quad | Freestyle
Vložit
- čas přidán 28. 08. 2024
- No wind or cold, a little toothpick flying.
Song: T & Sugah x Primate - Set Me Free [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/TS\_SMF
Watch: ncs.lnk.to/TS\_SMFAT/youtube
#fpv #fpvfreestyle #microfpv
I've converted a 2.5 inches 2s to a2 inches. 10kv motors, old crazybee f4 pro 2.0, elrs, eachine nano vtx and ant lite. I cannot understand the hype over 2 inches toothpick.. Same drone on 2.5 is all the way funnier!
Everyone's experience is different. I don't know where it is hyped because I haven't seen many 1s 2 inch builds. I really like this combo because it flies completely different than a 2.5 inch. It is more responsive , allows for sharper maneuvering. For me its the 3inch 1s hype that comes across everywhere. Some people love it ,but I only got a sluggish and powerless build (it got heavy ,so I am to blame). But who needs what they want or like, so use it. 2.5 inch is perfectly fine ,my first "serious" quad was the "Leader120" for me. I loved it (still have it). I like to fly several quads because it's nice to try things out. ;)
@TargetFPV you may try a unibody frame and a 1s super light board. I did it with the diamond f4 from crazybee, you have a 200mw vtx and a spi elrs included, a light canopy and you're good to go! Just mind motors: happymodel 1202.5 are good, same as the flywoo (even more powerful). I suggest use a bt2.0 plug!
@@francescorobotti8341 Thanks for the info! I have the motor RCinpower 1202.5 11500kv. However I have 9g 3 inch frame only (trueRC) and also not very light fc/esc+vtx+rx+cam+canopy ,so the end result is 50g dry. I would save a few grams with a diamondF4 , maybe I will give it a try ! Although I do have a diamonf4 on a whoop (frsky) ,but I don't want to take it apart.
Great build!
I want to build 3s 2 inch props like in the video, what motor size & kv is best? Easy to tune & solid!
Hello! Thank you! 3s 2 inch I had one that was built with 1105 7500kv motor and 2023 prop. In a slightly stronger frame. It worked. Unfortunately I didn't try any other motors on 3s 2 inch. In 2s 2 inch the bassline quad flies great but 3s can't handle FC. Here is my 3s 2 inch video czcams.com/video/B4x-fd5ZWqI/video.html
I already try 1105 7500kv setup, it is too much for the fc.
True, need solid frame for motors. The motor fly great on 3 inch props 2s 520mah.
I also try biblade 2inch 1102 9000kv on 3s 350mah, fly really great, 4 min flight time is easy. However I need stronger frame & better mount for runcam nano 3, the plastic mount that came together with the purchase is too flimsy, jello image.
I saw Betafpv Pavo20 use 1103 8500kv pair with biblade gemfan 2inch 2015 on 3s. I think I will try the motors pair with 2015 biblade for my next build.
I will take your advice for my next build such stronger frame & avoid any flimsy structure especially on camera mount.
Thanks for the reply. Happy flying 👍🏻
@@apair4002 1102 9000-10000kv on 2s 40mm/2 inch this combo worked quite well for me. Now I have 2 frames gems frame kit by piratframes 2"/2.5" ,I use it on 1s but maybe 3s setups would work too. The one I used AlfaRC cub-aio 2inch frame is also pretty solid. Maybe the bassline frame can handle 3s. Unfortunately there is not as much micro frame supply or variation now as there was a few years ago. Toothpick frames are a few ,but not much like geprc phantom or froggie135-136. They are kind of old fashioned micro quad. Or just found some of the heavier frames. Some of the frames I have are almost relics. I might dust them off and bring some to life. ;) Happy flying!
стиль терминатора - они все так летают - у них же голова стальная, а пропы пластмассовые)
Хорошо это или плохо? Я бы предпочел избежать деревьев в более расслабленном, мягком стиле. Но на них нет листьев, ветвей не видно, и так грязно, что не пробраться ни внутрь, ни наружу :) Остается кустарник "сбанг", кому-то он нравится, кому-то нет. Я пользуюсь переводчиком, извините.
@@TargetFPV я намекаю об опасности летать над собственной головой )) Я бы надел шлем, чтобы избежать травмы головы или летал бы подальше от собственной головы
@@Sasha_Svarovski Понятно. Это квадрокоптер 46g 1 cell fpv, я бы не стал подходить так близко с более крупным квадрокоптером. Я ударил себя по голове на полной скорости квадрокоптером (30g), и это было неприятно, но я бы не сказал, что опасно. Очки FPV защищают мои глаза и часть лица. Для меня важна безопасность, и я не летаю на таком открытом квадрокоптере без защиты пропеллеров рядом с незнакомыми людьми. Чем больше квадрокоптер, тем дальше я стараюсь уходить. Это также зависит от того, насколько хорошо я знаю квадрокоптер. Вы можете гоняться за Whoop, дети любят гоняться или убегать от него. Мне нравятся маленькие квадрокоптеры, может быть, самый тяжелый - 120 г.
What ckind of build is it nice flying
Thank you! This is a parallax fpv toothpikfrite frame. It has good thin arms. 2015 prop , Rcinpower 1002 19000kv motors, BetaFPV c02 camera and vtx.