One sweet ride and very inspirational but just so everyone knows that the cab obviously has the provision for a in cab gas tank and 1947-48 Chevrolet & GMC trucks didn’t have that their gas tanks were mounted off the frame under the bed.
Dude you guys make some amazing stuff man. This one just makes me happy. I got a 47 that I wanna do up similar to that style if I ever get done with my Camaro. Just love it. Great job.
Definitely a 50s, the vent between the door and hood weren't slits in the 40s, they were little doors that you could open from inside. Also it could be a 52-53 cause there is not exterior key hole, newer ones had put the hole on the handle itself but I'm not sure with this one cause there's neither
@@caitlingonzalez8633 I have a 48. It has the louvred (slits) on the passenger side and the vent door on the driver’s side. This is probably a 49 or 50. 51 forward had wing vent windows and 52 - 55 had push button door handles.
@@CS-rx2gx my bad yes, I meant to say since the driver side no longer has a vent door it would be a 51 or 52-53, probably a 52 or 53 just with different handles since it doesn't seem like they did any fabrication to cover the key slot under the handle if it was a 51
This … ya no words for this one . 🙌🏻🙌🏻🙌🏻. Question tho . Is there a rule of thumb for how much clearance you need for inner fender to face of rim ? . I’m trying to sort it out for my truck it’s on CB chassis with slam specialties and a ford 9” but not sure if the average housing is 60” or 58” with 20x9 4.5 backspace … a 62” housing puts me at 73.5 which is exactly what the truck is fender to fender … so if I went a 60” it gives me 1” clearance is that standard ? I’ve never had one on bags .. bad apple appears to have more then an inch so I’m thinking 58” housing puts me at 69 1/2” overall Any suggestions ! You guys are the kings of truck builds 👑
Short and sweet answer… depends on how low you want to turn and how much? Benefits to being sucked in further is you can turn lower… but some people don’t like the look. So it’s whatever you’re comfortable with… and not so far in that it’s going to rub on anything on the chassis.
@@tre5customs113 makes sense i know I want it not too far in but not maxed so I went with the 58” housing gives me 1.75” clearance on the rear and I mocked my front up it gives me 2” clearance face of tire to inner fender well . My 51 has always been stock so with the CB chassis it’s my first go .. I guess I’ll soon find out 1/4 done the build . Thanks for your help ! I’m in AZ a few times a year would love to see your shop . I’ll make sure to buy some merch tho haha 👍🏻 thanks for the help
Truck is sick! I'm building a 65 and relocated the tank to rear, how do you get the exhaust to exit out the back like this truck when it's that low? Under the axle?
Absolute beast. It's glorious, well done.
🙌🙌
I might look ok but deep down I'm dying for a truck like this. Well done guys
😂😂😂
Glorious resto-mod... And I love the name... "Bad Apple"... sick and slick
🙌🙌
I remember running across this channel when this video dropped and I'm happy that I found it again. This is my dream truck build.
Subscribe and click the notification bell… that way you don’t lose us again!
So glad you didn't put the shiny stuff on it.Its already perfect! That hood is 70 years of patina art! Better than a new Ferrari.
🤙🤙
That opening shot was sick!
Such a cool truck. All the right stuff done in the right places. Great job Tre5!
You knocked it out the park brother..
Daaayyyuuum...!!!!!! I think I found a new love... AWESOME ..... absolutely awesome..!!!!!!
I love that whine. Wow. The exhaust is bad ass as well
One sweet ride and very inspirational but just so everyone knows that the cab obviously has the provision for a in cab gas tank and 1947-48 Chevrolet & GMC trucks didn’t have that their gas tanks were mounted off the frame under the bed.
These trucks are full of little quirks and we’re always scabbed together.
Fkn sick truck!
Normally I don't care for patina, but that truck is bad ass! Well done!
Loving this build!
😉love it!😱 great work keeping it flat, low key...🤣 until u hear that whine 😆. You guys make some sick stuff. 👌🙏👏👏👏
Loved that you didn’t paint it!
🙌🙌
At last!!!! Love it!!!
Nice truck. I've got my 48' that i've made my own. Your truck is inspirational.
This is pretty much what I want my ‘52 Chevy Truck to be. 💯🔥💯🔥
OH MY This truck is bad ass. Super sweet build.
Thanks!
Bro that’s one of the sickest trucks I’ve ever seen, inside and out
Thanks!
Man that's nice! I've been into truck anything since the early 90s when I was teen, the stuff that comes out these days is unreal. Love Tre5 builds
Those ADV.1 wheels tho! This looked like a fun build!
So sick! I love the exhaust setup!
OMFNG!!!! THAT SOUNDS FREAKING INCREDIBLE AND LOOKS AMAZING, GREAT JOB!!
🤙🤙
Nice work guys and thanks for sharing this sweet ride
Dude you guys make some amazing stuff man. This one just makes me happy. I got a 47 that I wanna do up similar to that style if I ever get done with my Camaro. Just love it. Great job.
Loved the truck. Such a sick ride. Stay rad🤙🏽
Such a beautiful thing. Thanx fer the share.
Incredible!!!...🤙😎🤘
Key word being, quick
Perfect truck fast and rusty!
Looks and SOUNDS great!!! Love the painted trim.
🤙🤙
this truck is ridiculous. well done!
Nice 5 window 😍 I would kill for this truck😏
Nasty truck, gives me more inspiration for my ‘54 😩
i really love the way the truck looks good job
Thanks
That's sick! love it
I like everything on the truck besides the supercharger wine I’d prefer the exhaust notes
Exhaust comes out the back. Stand back there and you’ll hear it. Lol
This is a awesome project! 🔥🔥🔥
🙏🙏
I've got a 55 1st series in the works now.
Good idea with the old gas cap area with that bottle opener
Fuckin ayyyy bud!!! I digg it!!!
🙏🙏
WOW!!!!!! NICE!!!!!!!! 👍
Awesome build 👍
Thanks
Badass truck
Love this truck, wish I owned it!!
It’s only money
Very cool,love the supercharger
🤙🤙
fucking manual and boost, right up my alley
It’s a blast to drive!
@@tre5customs113 I can't wait to go for a ride!
Nice!
Loved it 🇧🇷
Love it!
Beautiful!
🙏🙏
Freaking nice!!
Fantastico!!!
Wao factor all the way
Great build! Not sure about it being a 47 tho. In 47 and 48 the gas filler wasn't on the cab.
Definitely a 50s, the vent between the door and hood weren't slits in the 40s, they were little doors that you could open from inside. Also it could be a 52-53 cause there is not exterior key hole, newer ones had put the hole on the handle itself but I'm not sure with this one cause there's neither
@@caitlingonzalez8633 I have a 48. It has the louvred (slits) on the passenger side and the vent door on the driver’s side. This is probably a 49 or 50. 51 forward had wing vent windows and 52 - 55 had push button door handles.
@@CS-rx2gx my bad yes, I meant to say since the driver side no longer has a vent door it would be a 51 or 52-53, probably a 52 or 53 just with different handles since it doesn't seem like they did any fabrication to cover the key slot under the handle if it was a 51
We shaved the key hole on the pass side, look real close. No vent windows and no push button door handles... so not a 52 or 53.
Look closer 😉 we did weld up the key hole on the pass side.
100% class
🙌🙌
Love it
So do we!
I need this!
Let’s do it
The only thing I don't like on that truck is the supper charger whine, and only because I would want to keep as a sleeper!!
🔥🔥
Very nice trk sir super charged dam
🙏🙏
What does a motor and transmission set up like that cost.do u do that set up all the time.
The reason being i have a 50.gmc that i want to see what type of busget one has to have to get one built . Just curious
"NICE" ride!!!
That's shit bad ass
I love you Dad
Thanks Jacob!🙌🙌
Saaaaaaweeeeeet!
Shit is bonkers 🔥🔥🔥🥃🥃🥃
This … ya no words for this one . 🙌🏻🙌🏻🙌🏻. Question tho . Is there a rule of thumb for how much clearance you need for inner fender to face of rim ? . I’m trying to sort it out for my truck it’s on CB chassis with slam specialties and a ford 9” but not sure if the average housing is 60” or 58” with 20x9 4.5 backspace … a 62” housing puts me at 73.5 which is exactly what the truck is fender to fender … so if I went a 60” it gives me 1” clearance is that standard ? I’ve never had one on bags .. bad apple appears to have more then an inch so I’m thinking 58” housing puts me at 69 1/2” overall
Any suggestions ! You guys are the kings of truck builds 👑
Short and sweet answer… depends on how low you want to turn and how much? Benefits to being sucked in further is you can turn lower… but some people don’t like the look. So it’s whatever you’re comfortable with… and not so far in that it’s going to rub on anything on the chassis.
@@tre5customs113 makes sense i know I want it not too far in but not maxed so I went with the 58” housing gives me 1.75” clearance on the rear and I mocked my front up it gives me 2” clearance face of tire to inner fender well . My 51 has always been stock so with the CB chassis it’s my first go .. I guess I’ll soon find out 1/4 done the build . Thanks for your help !
I’m in AZ a few times a year would love to see your shop . I’ll make sure to buy some merch tho haha 👍🏻 thanks for the help
What custom steering column did you end up using? God this is so nice. Love the engine and everything
It’s either an Ididit or Flaming River. Those are the only ones we use.
Bad azz!!!
P.S. Pretty sure the ghoul from Jeepers Creepers is going to try and steal it.
🤣🤣
Truck is sick! I'm building a 65 and relocated the tank to rear, how do you get the exhaust to exit out the back like this truck when it's that low? Under the axle?
Over or under, whatever there’s room for. The gas tank on this one isn’t at the rear.
My dream truck! Man you guys killed it. What are you running for air suspension?
Accuair
What type of model is it for the AC button on the dashboard because I want to add it to my truck just like you guys did.
Restomod air
Are you guy's gonna have a show with some of the builds you've done this year? I'm in Yuma and I'd love to come see your AMAZING builds! 👍👍
We will be at LST next month!
@@tre5customs113 Where is LST at and where can I find information on it? Thanks!!
@@ryanmoeller3308 it’s in Conroe, TX. www.lonestarthrowdown.com
@@tre5customs113 Yeah.. That's 19hrs from here.. LOL.. Any shows here in Arizona?
@@ryanmoeller3308 possibly good guys Scottsdale in April. For sure the Pro Touring Truck Shootout in April at wild horse pass.
Hey buddy, what wheels are you using on your truck I like them for my 52 Chevy, they look great. Best Regards Daniel
These are from ADV.1
unreal job fellas...what power does it make ?
Never put it on a Dyno for tuning, but we’re thinking it should be around 700 chp
Acuair prone to problems? He seemed surprised when he said it still working perfectly
They used to be, only with the CVT setup. They’ve gotten rid of that product.
Which make and model wheel are on this beast?
Adv.1
wow
Yes sir!
Sounds great but nothing sounds like a 235 with split pipes right
beautiful. Are these wheels 20" or 22"?
20”
Did u say dash was "wrapped"? Curious...like the flat black look!
Yeah, but wrapped in leather.
NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
👍
🤙
How much would this particular truck be worth as it is now?
About $200k
Its so hard to get. A car or truck
To say this is my own
🤷♂️
Fina....
🙏
Where'd you get the guages?
Info@tre5customs.com
CRAZY!!! My Father N Law just picked up a 48 3100 - he’s STOKED!!! Any shops in the West Coast you recommend? TIA!
WestCoastEngines!
Yes, us. We’re in AZ
What’s the name of frame ? Art Morrison?
No. We’ve never used one of those. This is the stock frame with bolt on drop members.
when sold what did it go for ?
The original person we built it for still owns it.
What headers did you use? Thanks
Ultimate Headers is the brand.
@@tre5customs113 Thanks
How much was the total price for this truck this is my dream truck but want it different color.
Every build is different
OUAWWW
🤙🤙🤙
That is one bad ass truck love it !
Real question whats a truck like that cost ? 100k
Around that, yeah
That S.O.B is BADA$$!! ... What's the "NOT FOR SALE" Price??
Email tre5customs@gmail.com if you’re serious
How much do u think it's worth? The only reason I ask is because I'm looking for one like that.
However much someone is willing to pay. Lol
19k?
For the engine? About.
That's why I wanted to know what u thought it was worth lol.
Are u guys hiring by any chance
Yes!
Riviu music nya
🤷♂️