2006 Brush Bandit 1590XP Hydraulic Drum Chipper final demo
Vložit
- čas přidán 11. 09. 2024
- 2006 Brush Bandit 1590XP Hydraulic Drum Chipper
bauertree.com/...
-142hp Cat 3054E Diesel Engine (tier 2), 15″ Capacity
--3,000 Hours, Hydraulic lift/crush, Dual Feed Rollers
---Auto Feed, 17.5″ Wheels, Pintle Hitch, Electric Brakes
----Good Condition, Fully serviced.
Located in Ashland Oregon
bauertree.com/...
This unit has been sold but we have lots of other chippers available.
We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, pre-ecm) brush and tree chippers and stump grinders.
For more information please go to my website, email me or call directly at 541-930-2925
bauertree.com
And please subscribe to my page.
Thanks for watching.
That's a 15" X 60' whole White Fir log. Yes the belts are squealing but there is a reason for that. You don't want to over tighten you drive belts because it is hard on the PTO bearings. The Auto Feed is typically set for moderate wood not max capacity wood. You can see this as the log progresses from max capacity (15") down to maybe 12". If you plan on chipping the max then reset the Auto Feed so it turns off of sooner,. In this case maybe 2200 rmps rather than 2000. Otherwise manually operate the infeed until you get to smaller wood. I will reset the Auto Feed if I'm chipping a bunch of big wood but leave it at factory settings most the time because that is where it chips best. Having said that I'll probably set this one at 2100 rpms. So why didn't I do that in this video? This was a test and I managed it by myself so only had one hand free. It just show how incredibly useful these chippers are.