How to fix a slipping skipping chain bike during pedaling problem solved
Vložit
- čas přidán 8. 09. 2019
- In this video we want to tell step by step. Why chain can skipping or like jump if the hard or medium pedaling.
only happens if your bicycles often used
00:13 Press pedal, what happens. Chain jumping and skipping, and not follow crank rotation. Crank look like not gripping the chain bike. Even medium press on the pedal.
00:20 Slow motion video, how chain can jump from chainring
00:28 Why chain can jump. Gear is damaged due to age. The pressure from the chain makes the teeth become sharp, and not strong enough to hold the chain. Please see details in the video, like pattern change from tooth chain ring.
00:55 a part damage in chainring. Usually not far away from the crank arm. Only appear for old bike or old chain ring
00:58 zoom damage tooth of chainring, pattern changes to be sharp. From Curve to be triangle / taper
1:39 Solve problem if chain skipping. Replace with New Chainring. Replace big chain ring, very easy, only pull out old chaining and replace with new one. Replace middle and small chain ring. Must release crank from bike.
2:45 After Replace Chainring. The normal pressure look pedal, No skipping chain, or chain goes out of the chain ring.
I hope this video can solve problem, if bike chain skipping
If you replace the chain, and the chain still skipping, jump until you lose pedal power
Please check the chainrings will most likely need to be replaced.
After 2 months, until found this problem. And the bike 11 years old.
Replace with a new chain, the chain bike is often jumping and going worse.
Wrong analize
In normal pedal, chain look good. But day by day, start going worse. Chain often skipping and more skipping
Replace a new chain, still problem and going worse. Bike Chain always jump, even medium pedal pressure will jumping / skipping
Check Jockey, not solve problem.
Check Rear Delarielleur, everything is good. Test shifting, moving gear without problems
Recheck tighten sprocket not solve the problem
Check and replace cable shifters. Problem still there
Clean shifter gear, give lubrication. Shifter more good lighter. But the problem is still there
Until we check the tooth chain ring, and source the hard sound from there.
That is the problem.
Replace the chain ring, problem solve ?
If any tooth of chainring is sharp, like a triangle pattern.
May be a problem from there.
What you must to do ! ! !
If you are never replace the bike chain, more than 5 years, and you are using your bike everyday.
Replace all new part, (1) sprocket, (2) chainring and (3) chain together.
Chain skipping like the tip of the iceberg, problem not from chain ring.
All part will effect if you already get chain ring wear.
Replace a new chain will not solve the problem.
The Chain will damage more shortly or distressed
Sprocket is a second part damage, before reach the chain ring.
If chain ring damage, sprocket definitely too.
You can check how to measurement chain, and when you must replace before get punk
• How does a broken spro... - Auta a dopravní prostředky
That was really informative
*This very informative video is a life saver...i fixed my bike my self after i watched it and knew exactly what i need to buy to fix it*
Thank u sir now i know what is the problem love you make more videos of cycle god bless you
replace music with narration
LoL
Sorry Yig
My house on the side of busy road
Only the sound of cars and motorcycles will be heard
Btw Thank so much for suggest
Yeah I came to a concert instead! 😂
@@ObengwareID There are websites that allow you to record your voice and create an ai version of it.
Now if you are interested in that I would make sure to read the legal stuff just to make sure they cannot legally "steal" and monetize your voice, but this could be a sollution for this issue.
This music has got me vibin
Great video, really in depth information on what to look for in terms of wear. I've been MTBing for 3 years now changed my large chainring along with the chain and cassette 1 year ago. I've been having issues with the chain coming off under standing load the last few days, did a inner and outer cable replacement and front and back mech index but it's still slipping. Testing yesterday I could see it slipping of the large chainring so I'll have a look if the chainring needs changed. I was looking at a new 1x12 set up which is more expensive then a £25 chainring 👍🏽.
Really Helpful
Thank you Kum
Sir i have non gear cycle and i put new chain and i put new back freewheel and whenever i pedal the cycle doesn't move when i push hard it move and in between when i pedal the pedal slip sir solution
Awesome! Really Helpful
Thank Bry
good video
Thank you Mov
rid my mtb for the first time today and my chain got stuck but I didn’t notice so I stamped on my pedal. Now when I cycle i end up doing pedals that feel like I’m in gear 1 but I’m actually in gear 7
pedal hard when starting the bike at the highest gear then...like the pedal goes empty and hit my crotch and chain drop sound? Chain didn't drop though.
@Guitar 1121 Replace rear sprocket and chain. They were worn out, not the front chainring..
1. properly maintain chain by wax
2. replace chain when is worn in early phase
3. reshape teeth to prevent new chain slipping/skipping
same cassete and chain rings can be used very long time/many kilometers before it have to be replaced
I have a problem with my bike and im not sure if its the crankset its a 3x8 and my casette and chain is already new but it still skips when im pedaling hard going uphill. Needed some help here.
Check your chain ring (you not ask about chain ring)
www.goesbike.com/pic/1909/chain-cara-memeriksa-rantai-sepeda-masih-baik-atau-rusak.jpg
www.goesbike.com/pic/1909/chain-ring-problem-kerusakan-chain-ring.jpg
Damage chain will impact to
Impact tooth sprocket first because worse chain
After sprocket damage, will damage chain ring.
I hope can help
Poorly adjusted derailleurs are the most common culprit
This is the exact problem I was having, thank you so much! I was losing my mind trying to figure out why a brand new bike chain was skipping teeth.
You are welcome Kep
If your changing your chain ring
Change your chain and possibly your cassette. That’s a lesson I went through when just changing my chain ring and still my chain was slipping
Agree, good advice Mark
Damage - chain
Next impact - sprocket
After sprocket will impact - chain ring
If chain ring already damage.
Must replace chain, chain ring and sprocket together
No other solution, all of 3 components must be replaced
I was thinking of getting a new chain.. neighbors are telling me to push the tire back or something.. I never thought to check the teeth (so anxious to ride my bike)
So if this doesn't fix my problem do you think the crank bearings need to be change??
not sure. but you can check lenght chain with simple check method in 120 seconds this video. before
czcams.com/video/-seF7HV5nP8/video.html
if your chain going bad. may be problem from there.
I hope can help and solve the problem
my chain slips when i stand up and pedal hard and i fly into the handle bars and rail my butt with the seat any help there?😂
How long have you not changed the chain
Measure the length of the chain
Look more detail any tooth of gear, like sprocket and chainring.
Maybe the cause is there
Lastly, take it to a technician for inspection
same thing. I just put in a brand new chain and as soon as I got on it I had this problem. It was working fine with my old rusty chain before it snapped. Now all of a sudden a have this issue.
@@brunnizzle same issue here on a 9speed drivetrain. tried using 10 speed chain as per advised by a mechanic to no avail. no skipping using my old 9speed chain though. i am so clueless.
when i stop pedaling ,......the chain get cloging ..... what should i do???!!
My cycle is only month old this is happening whyy
I have a 900£ hardtail and when i jump the gears jump
Check your chain First.
How long you never replace.
I hope the problem, not like our bike.
Make headache ;)
My bike have no problems with the Cassette or chainring teeth but when I apply pressure to the bike is start slipping. What should I do?
Can't answer for sure
But, check Front Derailleur
Maybe the setting is not right
1.
czcams.com/video/vcc5-ry4fA0/video.html
2.
Check shifter cable
We hope one of them can solve the problem
@@ObengwareID Thanks
I did this and it didn't fix my problem, altho wasn't for nothing because the chain ring was worn anyways, guess il have to also replace casette and chain to fix the problem since they are probably worn too and don't allow chain to sit well on new chain ring.
Thank for Info Jov
Is this written in English!?
When I am riding my chain slips and sounds dag dag whats the answer
We can't analized.
This video talk about chain.
If you forget to replace, sometimes about 4-5 years.
A jump chain can be caused by several things.
Derailleur, back shifting gear. Cannot withstand chain movement.
Sorry, Only our guess.
To make sure, you can ask the technician
As it says, don't try this with your crank.
Lol Thank you Vfx
I bought a new chain and I have a skipping chain problem on rear casette. Casette is not worn. Teeths are like new. Do anybody know solution for this issue?
Usually when changing to a new chain u must replace the cassette, if it still skips replace the crankset as well
@@Lunarpollo5622 Thank you for the answer. Iam going to replace chain rings on crankset, hope that will help me to solve this problem.
Also make sure there aren't any stiff links on the chain, chain must be properly lubricated
@@Lunarpollo5622 mine has new 9s cassette, new 3x cranks and new chains (10s and 9s), still skips mostly on the 7th gear of the cassette.
@@ebingthegreat5578 mine skips on the smallest sprocket but only if i put down an unrealistic amount of power onto the pedals, other gears are fine tho. Not sure what the problem is at this point
But theres no damage in my chainring
For example, you often cycle every day for a distance of 3-5km. While not too far, if you add up the distance, it's certainly quite far.
The chain length can be checked.
czcams.com/video/Qk2JcbFZM9c/video.html
A stretched chain can be removed from the chain ring. The solution is easy, replace the chain
Luckily, the chain ring and sprockets are in good condition.
I hope you can find the source of the loose chain
Id say all those chainrings are gone
Too many problems... I rather walk.
So this was the problem
Not all.
Sometime, front derailleur not precision
This case, problem from worn chain.
Some people forget to replace their chain.
The technical know-how may be on point but the grammar and syntax is CLEARLY indicative of someone not familiar with the English language. And why do they just make it the CZcams standard to add that pretentious binaural cacophony?
Thank Rick.
I hope people understand
This is gibberish
If you have bike. Never change your chain. Damage chain, will impact chainring and sprocket too.
well i think grammar is the only thing you can reproach in this video, the content was quite informative imho
I could make the case that the music is super annoying but I wont.