Installing a Rough Country 4" Lift On My Silverado
Vložit
- čas přidán 21. 11. 2017
- Thanks for Watching!
Follow Me
@austin04_z71
@its_brandenburg Shop Owner
Lift- Rough Country 4"
Wheels- Fuel Maverick 2pc 20x10 -19
Tires- Toyo Open Country M/T - Auta a dopravní prostředky
I've been running RC 2" aluminum alloy spacers for about a year now and I've never had any problems
I love the way it looks!
Had the same lift on my 04 ‘rado with 14 wides and 35’s and loved it
Good work brotha. Love the details of the video and how you explain everything.
Love your videos man, keep up the good work!
The truck looks amazing man
I have the same truck 05 and just put a 4 inch Rough Country lift in . Love it and has been good. Truck looks amazing . Your truck looks very good 😉 Love this style of truck
KrashBandit666 i just did an 06’ RC directions kinda suck butni made it,, also, n the rear did you remove the stock blocks or did you add the RC on top of them?? I took them out but looks like im squatting in the rear
I was almost gonna get the 4" RC lift, but just ordered the 2.5" leveling kit.
Your video was very good I have a 97 Chevy k1500 and I only want the 4 inch lift thanks for your video very helpful
Nice! Finally someone that cares about the ride quality and CV angles! Well done brother! Truck is looking good! As other said, Bora would be the spacer to go to!
Woops I guess you got em already! New subscriber btw!
Haha yep and awesome thanks
I'm doing my truck right now in my garage im getting ready to drop my diff in the am at least you have a lift im doing it on the ground lol .... wish me luck looks sick bro love the truck ill be there soon
Bora 2in spacer for the rear.. Hubsentric
Hey important question did you have to cut anything? I watched a video of a 6in lift and they cut just 3 different spots?
New subscriber here. I have an 03, that I want to either use the same lift or at least level it. I'm also nervous about the front diff.
On your other vid, you were looking for a powder coater. I have a great powder coater that I use for my large items on my Camaro project near Wytheville. I'm in the NRV. Great channel.
Customs offsets man they have the bora spacers to help the rear!
What wheel and tire size where u running at the time of installing the lift??
Going to have a 4 inch rough country lift put on shortly but want the rear jacked up just a little more after the lift. Like an add a leaf or taller block. Any suggestions?
Did you use stearing kicker bars that they sell optional?
How did your cv boots survive over time?
The best spacer would be BORA. They have a hub centric ring to keep the wheel weight balanced throughout
the ring is to keep the wheel centered and not put the weight of the vehicle off of the studs.
I know this is an old video but I have the leveling keys like you did, would you recommend leaving them in or putting the stock ones back in
What do the control arms look like since you got the leveling keys in with it?
Borra is a good spacer brand. Go to custom wheel offset
After you put the lift on, how tall is it from the ground to the fender on the front?
That's a lot of work I'm second thoughting lifting my silverado
Did you lower control arms stiffen when you loaded the torsion bars
I have a 6inch Rc lift on a 06 Silverado, I’d there a way I could drop it down to a 4 inch? Any info would help! THANKS
Were you running 33's in this video?
How big is the block in the back for a 4 inch lift
How does the truck drive now with the torsion bars moved in the location? Be totally honest, does it turn mushy, differently overall, because now the torsion bar is being difentely pushed more than twisted. be honest! There's a company that has a kit to do the exact thing, moving it up. Ya, I like it being up , and out of the way, cleaner! Thanx! I'll try not to bother any more.
What is with guys obsessed with pointing the phone at themselves when everyone wants to look at the truck??? Sorry bro, no guy wants to stare at any guy's face for 16 minutes.
Does it bounce alot or rides smooth? Any info on confor or difrenses
Were the tires 33's or 35's?
Is that a 6 in crossmembers look kinda big for 4in
Would I be able to install this lift on my truck if I have 16 in rims
Is this the 900 4in rough country kit ?
Can I still pull q goes neck with this lift
Lools nice! How was the drive quality after the 4" lift? I've been thinking of doing a 3.5 or 4 on my sierra.
Much better than the leveling kit
How tall is the overall hight of the truck?
So with a 4 inch RC lift you could actually get 6 inches with aftermarket keys? I'm try I g to clear 33s with 2 inch adapters. Looking into getting a lift kit. Just have no clue what i should get.
I’m a year late but however much the keys lift it add that and however big the lift is like 3 inch keys and a 6 inch lift is 9 inches in the front you do run a risk of messing your suspension up tho
Did you need longer brake lines
Rim and tire size?
Do I have to cut anything if I have a 2wd truck I know it's a dumb question I'm in the learning process I've never lifted a truck before so I trying to get a bolt on kit
No
Im having trouble reinstalling the torsion bars its either to much tension or not enough can you explain why or the process reinstalling please.
Im having that problems aswell
Did u figure it out help a brotha out
I'm doing this to my 1999 chevy
Debadge that truck. Take off all the emblems, the side trim off the doors. Makes the truck look like a million bucks. I did it to my 05 and took off the side view mirrors and installed tow mirrors to make it look tougher.
Does the kit come with all those parts or did u have to buy them separate?
Aye Turn up boi kit comes with everything you need
Sell me those wheels and tires if your getting rid if them!
won’t the front lift kit on this silverado fit a 03 tahoe?
I just ordered the 6 inch lift for my 04 Tahoe. When I received it I began to inventory it and the first set of instructions and inventory booklet was listed for 99-06 pickup 4wd. Initially I was confused but after continuing to do the inventory, I realized that the front parts are exactly the same. The only parts that are different are the rear. The pickup uses lift blocks and the Tahoe uses lifted springs. Here is the link for the inventory and instruction sheet for the 2000-2006 Tahoe. s3.amazonaws.com/roughcountry/install/280n2.pdf and here is the link for the 99-06 pickup. s3.amazonaws.com/roughcountry/install/921272X00.pdf Check them both out and compare them and you'll see that they are the same. Hope this helps.
When you put your torsion bars back in was your lower control arm tight or Stiff?
Im having the same issue mines when the torsion bars are out the lower control arms feel loose but when i load the torison they get hella tight and stiff im wondering if thats how its supposed to go im not sure
Did you ever solve this torsion bar riddle im in the process of lifting my 99 Chevy Silverado got everything done but this torsion bar thing its killing me cuzz as soon i as i load the torsion bars the lower control arm gets super stiff and tight
I live down in Martinsville VA man. How much would your buddy charge me to do the 6 inch lift on my 2002 Silverado?
Brian Gilley 01 for me I am gonna put a 4.5
Where did you get that grill for your truck
eBay
I am looking for a 4 inch lift kit for my 2018 Chevy Silverado 2500hd. I was wondering if any of yall got suggestions for what brand. Also, does the rough country 4 inch lift kit make my truck level and lift or no?
Thanks👍
Lifts usually make the truck almost perfectly level. If not for some reason you can crank your torsion keys a little or get a smaller rear block to make it level. Rough country is fine, I’d recommend bilstein shocks though. The rough country ones aren’t great, but get the job done
@@jacobn3160 awesome man thanks
would it hurt to turn my factory keys on a 03 Silverado to match the back??
green arrow it just stresses out the front suspension I have plenty of videos on all of that with my leveling kit
Where did u get those headlights???
PlanetEclipse89 just an eBay set
I have almost the same set up do you regret getting a 4 inch and want a 6 or do you like the 4
Bass Slayr so far I love the 4” and once I do 35s it will be perfect. I think it’s the best practical lift
The 4" suspension lift is really the most optimal lift kit to have on a truck strictly based on the structural integrity of the build. Not only does it create enough room to run 35×12 tires, but the design and 4" length allow the truck to operate per usual avoiding less stress/damage on CV's/Ball joints etc. The build of the truck's frame, suspension, and entire wheel assembly is still really solid. More lift=more stress on mechanical integrity. Yea it looks nice and all, but it must be well taken care of and not rode hard to prevent breaking something.
@@btgperformance9234 read my comment below lmao. There's no question its the best lift to put on a truck
*Comment above* lol my bad
For example, look up a pic of an 05'-06' duramax on a 4" lift, and then look at one with 6" and above on it. Which one looks like it's sitting more solidly and built to last? You'll see what i mean
alright guys 😂
is the kit sold as a 6-inch kit? please let me know as i'm lookin to buy soon!
dano no they have a 4” kit and a 6” kit
haha never mind
What offset are your wheels?
-19
What size tires do you have?
33” do you even listen 🤦♂️
You decided not to get the lift painted?
How much did it cost ya?
David Underwood $1,120 for the lift with kicker braces
Great video! We would love to do a collab with your channel using any of our kits if you're interested! -TORCH
Does anyone else think that men with eyebrows plucked look strange? Just saying not trying to be mean, a little bit.
If U could keep the camera still 4 one minute it B worth finish watching
Do these young guys know when you lift your vehicle like this how much added wear and tear it does to your truck not to mention it's hard to work on the engine not to mention shittier gas mileage with bigger tires but hey when parts get f***** up it's easier to crawl underneath and repair them
We do but we don’t care 🤷🏼♂️
@@btgperformance9234 MAC THE SLOVAC-Go find a hole to crawl in!
Get lost troll
I believe you mean transfer case
I believe you're a dumbass
AmishTechSupport - 😂😂😂😂
Did you use factory torsion key's?
You move your camera to fast dude. Keep it steady. Shake less.
if you don't want the video so long stop repeating yourself.
Could add more installation instructions if you wouldn’t keep repeating the same damn thing. 🤦♂️