is there a way to short out certain pins to force a reset orfactory default of the camera from the ethernet jack? I keep reading on forums that when you update the firmware you need to do a complete factory default of the camera. sometimes the camera locks up and you have to climb a roof to reset a camera, this isn't practical, especially when the camera site is 40 minutes away.
Hi. Resetting by shorting the Ethernet is not a option I’m afraid. However other options are XML resetting. This process just requires a email to our Support Department and a separate network switch unless already on one. On a side note, for sure by the book you should Factory Default after a upgrade however unless it was a big jump like from 2018 to 2021 a factory default is not always necessary.
is there a way to short out certain pins to force a reset orfactory default of the camera from the ethernet jack? I keep reading on forums that when you update the firmware you need to do a complete factory default of the camera. sometimes the camera locks up and you have to climb a roof to reset a camera, this isn't practical, especially when the camera site is 40 minutes away.
Hi. Resetting by shorting the Ethernet is not a option I’m afraid. However other options are XML resetting. This process just requires a email to our Support Department and a separate network switch unless already on one. On a side note, for sure by the book you should Factory Default after a upgrade however unless it was a big jump like from 2018 to 2021 a factory default is not always necessary.
Can ye do a video on using the virtual host so to log in to the cameras via the recorders network port.
Okay. We will consider this. Thank You.
My cam B1A21P does not have two “holes”. What can I do?
Good explanation
Thank you
Thank You for Feedback.
Thanks 👍👍
Welcome 👍
Hey! Is it possible to reset an hdcvi camera? I mean the osd menú with no possibility to see the cam on dvr ( is not compatible)
thank you so much
Thank You for Feedback :-)
Once you reset the camera, what is the default password?
How do I reset speed dome camera DH-SD50230TN?
Behind the lens is a reset button that can be held for 20 seconds to reset.
How do I reset an analog camera stuck in CVBS mode? The OSD menu can't be accessed.
If you use the Dahua UTC Controller this can help with this. czcams.com/video/ypYzSZh3IcQ/video.html :-)
Hello did you solve the problem
@@furkanyldz8562 Nope. UTC Controller does not work. Once your camera goes into CVBS mode chuck it in the bin.
how to reset dahua b1a51p camera
My own reste is not working
HELLO, if I reset the camera, will the password be reset too?
Please contact support.uk@dahuatech.com
Yes it will