I figured out how to change the fan colors. while on the zones page, at the top click the "RGB Zones" button (the overlapping circles) - from there it should be on the lighting board screen. at the bottom under the grey lighting board rectangle there is a circle with a 2 in it. click that and then change the colors just like the rest.
Thanks for the video. So when you switched to "Extreme", did you notice any difference in CPU temperature? and if so, what was the difference in your case?
Can you take a video of your lighting board and post it on your channel? It is on the side panel NOT WHERE THE GLASS IS the opposite side. There will be a board with about 4 wires, 2 for ARGB or RGB depends though. Can you take that connector out and show me the ports. I want to know if it has 3 or 4 ports because that can probably help me with my ARGB. If you need help finding it look up pictures of "OMEN Lighting Board"
Hi Jhoe308. When I added m.2 ssd in omen 40l ( behind the graphic card), I saw a unknown pad that lied in the back of ssd slot. Is that the thermal pad or I have to remove it before adding ssd ??? ( and if that is thermal pad, do I need the remove the top like 2 face tape or just install directly on that pad ). Thank you very much 🙏🙏🙏
I guess you are referring to a sticker saying “Thermal pad is required” You can remove the sticker, but it is not thermal pad. When you install SSD, you need to purchase thermal pad for SSD and attach on the surface of the SSD. The work is going to be like this video (please see from 7:00) czcams.com/video/imbrtYxqXYg/video.html
light studio was working on my pc now its not showing the pc or keyboard on the layout. It was on the layout previously. The mouse is the only thing to show on the layout but it isn't doing any of the effects. Any clue on how to fix this problem?
Hi, I'm having no problem getting everything else synced but I can't seem to get the DDR RAM colours to sync up with the rest of the machine no matter what I do. Any advice on this please?
I am expecting my Omen soon and I want all the lights to be very low. Looks like I can change the brightness for EVERYTHING?, but unclear whether the changes I would make would be saved?
@@thegametechs Are you sure? During the video I saw a slider in the advanced tab called "brightness". If not for adjusting the brightness of the light(s) then what is it for?
@@megabyte7047 You are absolutely, right. Thanks for pointing that out. It does control the brightness. It was just my personal preference that I do not use it often.
Hey there you probably won’t read this but i need a little help, so today i took my graphics card out (i was trying to reseat it just because😅) and after i put it back in and connected all the cables i just got no display, I’m pretty sad because it was a gift from my parents could you help me? I already tried reseating it just in case it was a loose connection but i still got no display even tho all the rgb and fans were working
Hello. thanks for your question. First of all, I believe it is just a connection issue. There are few steps you need to check. 1) Make sure ur GPU card is correctly inserted to the slot. The GPU slot has a clip, when u i stall it correctly, you will feel/hear a “tick” sound which is the sound coming from the clip 2) RAM card - when you install GPU, sometimes you accidentally touch RAM cards, and it causes start up failure. 3) Display and HDMI port, try different port and make sure you connect the cable firmly. If you have been using multiple monitors, use only one monitor to check the connection. I hope it helps. Let me know how it goes!
@@thegametechs I thought it was a ram issue too but i reseated it twice i even tried taking one stick to see if it was one broken ram stick but still no display, i only use one monitor but i still tried changing my displayport cable to an hdmi and still no display, its pretty weird because the fans and the geforce logo on the graphics card are working
@@Edw1net Your geForce logo will still be lighting as power is connected. I am sure it is a issue with GPU installation on the slot or cable connection. Please take it out again and re do it firmly. Make sure your your power is turned off when u do it.
@@thegametechs quick update here, so it looks like when taking out my graphics card i messed up the pcie slot, i checked if my pc has warranty and it does so right now my pc is getting fixed, thank you for your help!
Probably it is because you have two many "start up apps" in your windows? Please go to search by from the windows main menu icon and type "startup apps" and turn off all start up apps. I hope it helps!
I figured out how to change the fan colors. while on the zones page, at the top click the "RGB Zones" button (the overlapping circles) - from there it should be on the lighting board screen. at the bottom under the grey lighting board rectangle there is a circle with a 2 in it. click that and then change the colors just like the rest.
@@TheSiCkCaMz so the basic setting is simple color change, omen light studio is a comprehensive aRGB setting. Are u sure u tried in Omen Lighting Studio?
I figured out how to change the fan colors.
while on the zones page, at the top click the "RGB Zones" button (the overlapping circles) - from there it should be on the lighting board screen. at the bottom under the grey lighting board rectangle there is a circle with a 2 in it. click that and then change the colors just like the rest.
friend, do you know why my omen sometimes starts windows slow and to fix it I have to restart?
What am I doing wrong where it’s telling me radial needs 2 or more zones to be selected in order to work properly?
Thanks for the video. So when you switched to "Extreme", did you notice any difference in CPU temperature? and if so, what was the difference in your case?
Thanks for watching the video. The extreme mode - I did not feel any big changes, I guess fan speed is little bit up.
Can you take a video of your lighting board and post it on your channel? It is on the side panel NOT WHERE THE GLASS IS the opposite side. There will be a board with about 4 wires, 2 for ARGB or RGB depends though. Can you take that connector out and show me the ports. I want to know if it has 3 or 4 ports because that can probably help me with my ARGB. If you need help finding it look up pictures of "OMEN Lighting Board"
6:25 what do you mean by coolers?
Hi Jhoe308. When I added m.2 ssd in omen 40l ( behind the graphic card), I saw a unknown pad that lied in the back of ssd slot. Is that the thermal pad or I have to remove it before adding ssd ??? ( and if that is thermal pad, do I need the remove the top like 2 face tape or just install directly on that pad ). Thank you very much 🙏🙏🙏
I guess you are referring to a sticker saying “Thermal pad is required” You can remove the sticker, but it is not thermal pad. When you install SSD, you need to purchase thermal pad for SSD and attach on the surface of the SSD. The work is going to be like this video (please see from 7:00) czcams.com/video/imbrtYxqXYg/video.html
If you want to go with a cheaper version, you can try this one amzn.to/3GvenXg
If you prefer something looks shiny one you can try this one as well amzn.to/3vQVARt
light studio was working on my pc now its not showing the pc or keyboard on the layout. It was on the layout previously. The mouse is the only thing to show on the layout but it isn't doing any of the effects. Any clue on how to fix this problem?
Hi Tyler, thanks for your question. Which keyboard are you using? There are some keyboard that is not compatible with the light studio.
Hi, I'm having no problem getting everything else synced but I can't seem to get the DDR RAM colours to sync up with the rest of the machine no matter what I do. Any advice on this please?
DDR Ram cannot be synced…maybe. Have you tried the Omen light studio?
@@thegametechs Yes. It's not even a thing on there
@@Dobcool RAM does not sync with other aRGB settings.
would you recommend the extreme or the overlocking feature?
Yes. Done it thru Omen app is very safe.
I intend to buy the 45l Can the LEDs be set to static and all on white?
Yes!
I am expecting my Omen soon and I want all the lights to be very low. Looks like I can change the brightness for EVERYTHING?, but unclear whether the changes I would make would be saved?
Yes it will be saved and stick as your default setting.
By the way, you cannot change the brightness. it is bright enough though.
@@thegametechs Are you sure? During the video I saw a slider in the advanced tab called "brightness". If not for adjusting the brightness of the light(s) then what is it for?
@@megabyte7047 You are absolutely, right. Thanks for pointing that out. It does control the brightness. It was just my personal preference that I do not use it often.
Do you think the rgb controller board supports Razer kunai fans?
Yes. The ARB board supports both aRGB (3pin) and RGB(4pin)
Hey there you probably won’t read this but i need a little help, so today i took my graphics card out (i was trying to reseat it just because😅) and after i put it back in and connected all the cables i just got no display, I’m pretty sad because it was a gift from my parents could you help me? I already tried reseating it just in case it was a loose connection but i still got no display even tho all the rgb and fans were working
Hello. thanks for your question. First of all, I believe it is just a connection issue. There are few steps you need to check. 1) Make sure ur GPU card is correctly inserted to the slot. The GPU slot has a clip, when u i stall it correctly, you will feel/hear a “tick” sound which is the sound coming from the clip 2) RAM card - when you install GPU, sometimes you accidentally touch RAM cards, and it causes start up failure. 3) Display and HDMI port, try different port and make sure you connect the cable firmly. If you have been using multiple monitors, use only one monitor to check the connection. I hope it helps. Let me know how it goes!
@@thegametechs I thought it was a ram issue too but i reseated it twice i even tried taking one stick to see if it was one broken ram stick but still no display, i only use one monitor but i still tried changing my displayport cable to an hdmi and still no display, its pretty weird because the fans and the geforce logo on the graphics card are working
@@Edw1net Your geForce logo will still be lighting as power is connected. I am sure it is a issue with GPU installation on the slot or cable connection. Please take it out again and re do it firmly. Make sure your your power is turned off when u do it.
@@thegametechs quick update here, so it looks like when taking out my graphics card i messed up the pcie slot, i checked if my pc has warranty and it does so right now my pc is getting fixed, thank you for your help!
@@Edw1net Your mainboard should have one year warranty. Please do not worry, but simple contact HP service center.
Hello
Probably it is because you have two many "start up apps" in your windows? Please go to search by from the windows main menu icon and type "startup apps" and turn off all start up apps. I hope it helps!
Can you help me with my rgb fans not working.
Hey. I have totally missed your comment. I am sorry about that. How is your RGB looking now?
I figured out how to change the fan colors.
while on the zones page, at the top click the "RGB Zones" button (the overlapping circles) - from there it should be on the lighting board screen. at the bottom under the grey lighting board rectangle there is a circle with a 2 in it. click that and then change the colors just like the rest.
my argb fan is not working?
Have you encountered any problems? How may I help you?
@@thegametechs im having the same issues where it doesnt do argb plz help
@@TheSiCkCaMz Have you tried as I explained in the video? czcams.com/video/qnzkXlKEGOc/video.html
@@thegametechs I did but nothing and idk why ? Is it maybe my fans don’t have argb? Not sure cause it has the options
@@TheSiCkCaMz so the basic setting is simple color change, omen light studio is a comprehensive aRGB setting. Are u sure u tried in Omen Lighting Studio?